Export limit exceeded: 401008 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 401008 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (401008 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93215 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cdx: Fix double free when sysfs file creation fails In cdx_create_res_attr(), if sysfs_create_bin_file() fails, the code frees res_attr but doesn't set cdx_dev->res_attr[num] to NULL. This leaves a dangling pointer in the array. Then cdx_destroy_res_attr() frees the already-freed memory. Fix the double free by initializing cdx_dev->res_attr[num] after sysfs_create_bin_file() completes. | ||||
| CVE-2026-93218 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: skip device-private PMDs in madvise_free_huge_pmd madvise_free_pte_range() checks pmd_trans_huge(*pmd) unlocked, then madvise_free_huge_pmd() takes pmd_trans_huge_lock(). pmd_is_huge() returns true for a device-private PMD, so orig_pmd can be device-private and enter the !pmd_present() branch. Skip device-private PMDs in that non-present branch and continue to out before calling pmd_folio(). Downgrade the check to VM_WARN_ON_ONCE() so an unexpected PMD softleaf logs a warning rather than panicking. Drop the thp_migration_supported() guard: it expands to IS_ENABLED(CONFIG_ARCH_SUPPORTS_PMD_SOFTLEAF), and both pmd_is_migration_entry() and pmd_is_device_private_entry() already return false when that config is not selected, so the guard suppresses only the case where the warning would already be silent. Potential trigger: an HMM-based GPU driver races with madvise(MADV_FREE): migrate_vma_pages() flips the PMD to a device-private entry between the caller's pmd_trans_huge() check and the callee's pmd_trans_huge_lock(). | ||||
| CVE-2026-98038 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Keep refcount_acquire nullable for borrowed RCU kptrs bpf_refcount_acquire() is fallible for a borrowed reference because the object may have reached a zero refcount. The verifier therefore keeps KF_RET_NULL on the return value unless the argument is an owning reference. An RCU-protected load of a local kptr is marked MEM_ALLOC, but it only receives NON_OWN_REF when the pointee contains a graph node. A refcounted object without a graph node consequently looks like an owning reference even though the loaded register has no acquired reference state. If the program drops the last real reference while remaining in the RCU critical section, refcount_inc_not_zero() returns NULL while the verifier treats the result as non-NULL. Only classify the argument as owning when it is backed by a verifier-tracked reference. This retains the non-NULL return for pointers from bpf_obj_new(), bpf_kptr_xchg(), or an earlier successful acquisition, while requiring a NULL check for borrowed RCU kptrs. [ kkd: Rewrote commit log ] | ||||
| CVE-2026-93227 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/mm_init: deferred_grow_zone(): fix out-of-range first_deferred_pfn With CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled, deferred_grow_zone() initializes struct pages early in boot to satisfy an allocation. With a large CMA reservation in place, the ranges deferred_init_memmap() finds may not add up to the allocation it was asked for, and the function ends up initializing the memory map of the entire zone and still falls short. That is fine in itself: the function accounts for it and leaves the caller to decide whether it now has enough memory. However, the update of pgdat->first_deferred_pfn that tracks where uninitialized memory map starts could overflow. If the node's RAM end is not aligned on PAGES_PER_SECTION boundaries and some deferred struct pages were initialized, pgdat->first_deferred_pfn would point past the end of the node's memory. deferred_init_memmap() later picks up from pgdat->first_deferred_pfn and hits a BUG_ON(), because it expects a pfn within its node. For example, when running a kernel with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y and CONFIG_CMA=y using the following qemu command line qemu-system-x86_64 -enable-kvm -m 8032M -kernel bzImage \ -append "nokaslr cma=4768M@0x100000000" the kernel panics: kernel BUG at mm/mm_init.c:2131! CPU: 3 UID: 0 PID: 36 Comm: pgdatinit0 Not tainted 7.2.0-rc6 #1 RIP: 0010:deferred_init_memmap+0x1b8/0x1c0 RAX: 0000000000236000 R13: 0000000000238000 Call Trace: kthread+0xdf/0x120 ret_from_fork+0x187/0x250 Make sure that the update of pgdta->first_deferred_pfn does not overflow when the entire zone's (and therefore node's) memory map is initialized. [rppt: massaged the changelog] | ||||
| CVE-2026-93229 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: add missing read barrier to rpc_status_get dumpit seqcount retry The hand-rolled seqcount-like protocol in nfsd_nl_rpc_status_get_dumpit() is missing a read memory barrier (smp_rmb) before its second counter check. The standard kernel read_seqcount_retry() includes smp_rmb() to ensure that all data reads complete before the counter is re-checked. Without this barrier, on weakly-ordered architectures (ARM, POWER), the CPU may reorder field reads past the second counter check, making the retry logic ineffective: it could observe a consistent counter pair while reading fields that have been concurrently modified by the writer. Add smp_rmb() before the second counter check to order the field reads ahead of it, matching the barrier semantics of the standard seqcount read-side. The begin-side smp_load_acquire() already pairs with the smp_store_release() in nfsd_dispatch(); with the smp_rmb() now ordering the field reads, the retry check no longer needs acquire semantics and reads the counter with a plain READ_ONCE(), as read_seqcount_retry() does. [ cel: Use READ_ONCE instead of smp_load_acquire() ] | ||||
| CVE-2026-86857 | 1 Servicenow | 1 Servicenow Ai Platform | 2026-09-26 | N/A |
| ServiceNow has remediated an authorization bypass security issue that was identified in the ServiceNow AI Platform. This security issue, if exploited, could enable an authenticated user to access data within the ServiceNow AI Platform that the user otherwise would not be entitled to access, potentially enabling further unintended access. ServiceNow deployed an update to hosted instances, and ServiceNow provided the update to our partners and self-hosted customers. We are not currently aware of malicious exploitation against ServiceNow instances. We recommend customers promptly apply appropriate updates or upgrade to a patched release if they have not already done so. | ||||
| CVE-2026-88421 | 2026-09-26 | 7.5 High | ||
| Incorrect access control in the BlogPage.get_entries() component of APSL puput v1.2.1 through v2.2.0 allows unauthenticated attackers to view restricted blog entries via the blog index, the tag, category, author and date archives, the sidebar widgets, or the RSS feed. | ||||
| CVE-2026-86837 | 2 Bookly, Wordpress | 2 Bookly, Wordpress | 2026-09-26 | 5.3 Medium |
| The Bookly WordPress plugin before 28.3 does not properly verify a customer's identity before updating their stored details, allowing unauthenticated attackers who know a customer's primary identifier to overwrite that customer's stored personal information such as name, email and address. | ||||
| CVE-2026-80514 | 1 Wordpress-extensions | 1 Wpforo Forum | 2026-09-26 | 5.3 Medium |
| The wpForo Forum WordPress plugin from 3.0.0 before 3.1.6 does not verify the source of client-supplied IP address headers before using them to key its per-visitor rate limit on paid AI requests, allowing unauthenticated attackers to bypass the limit by spoofing the header and exhaust the site owner's metered AI credits. | ||||
| CVE-2026-88848 | 1 Wordpress-extensions | 1 Masterstudy Lms | 2026-09-26 | 4.2 Medium |
| The MasterStudy LMS WordPress plugin from 1.9 before 3.7.50 does not verify that a course a member asks to enrol in is covered by their membership plan, nor that the plan identifier submitted with the request is one they actually hold, allowing any member to enrol themselves into restricted paid courses outside their plan and beyond the number of courses it entitles them to. | ||||
| CVE-2026-97433 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme: validate FDP configuration descriptor sizes Validate descriptor sizes while walking the FDP configurations log so dsze == 0 or a descriptor past the log end cannot cause unbounded iteration or reads past the buffer. | ||||
| CVE-2026-97570 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Bound SW TPA IDs to prevent crashes FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range 0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a software ID which is used to index rxr->rx_tpa, and to generate a mapping between FW IDs and the wrapped software ID. On a 57608 with firmware version 233, the firmware advertises 32 concurrent TPAs. As of the commit under fixes, bp->max_tpa on this NIC is set to 32. If the software ID from bnxt_alloc_agg_idx is above 31, this results in an invalid address being loaded on this line: tpa_info = &rxr->rx_tpa[agg_id]; because rx_tpa is allocated with only bp->max_tpa (32) entries. Writes to tpa_info later in the code are out of bounds. This bug results in a crash at boot: Oops: general protection fault, kernel NULL pointer dereference 0x8: 0000 [#1] SMP NOPTI RIP: 0010:bnxt_rx_pkt+0xc0/0x1560 RSP: 0018:ffffc900009b8c78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000048 RCX: 0000000206682516 RDX: ffffc900009b8db4 RSI: 0000000000000000 RDI: 01ffffff038fe1c0 RBP: ffffc9006e687480 R08: ffffc9006e687000 R09: 0000000000003048 R10: 0000000000000480 R11: ffff8881c6083900 R12: 0000000006682516 R13: ffff8881c6095400 R14: 0000000000000016 R15: ffff8881c6b66680 FS: 0000000000000000(0000) GS:ffff88fef3c77000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc8bda40584 CR3: 000000807c812001 CR4: 0000000008772ef0 PKRU: 55555554 Call Trace: <IRQ> ? __netif_receive_skb_list_core+0x1ca/0x250 __bnxt_poll_work+0x152/0x280 bnxt_poll_p5+0x1cd/0x480 __napi_poll+0x30/0x180 net_rx_action+0x20b/0x3b0 ? note_gp_changes+0x53/0xe0 ? tick_setup_sched_timer+0x180/0x180 ? __napi_schedule+0x9a/0xb0 ? bnxt_msix+0x24/0x30 handle_softirqs+0xdd/0x2c0 __irq_exit_rcu.llvm.3171231171502365008+0x47/0xf0 common_interrupt+0x85/0x90 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 This stack trace is from a crash triggered when an out of bounds rx_tpa is dereferenced. The invalid write mentioned above is silent in this particular crash. Fix this by allocating rx_tpa with bp->max_tpa rounded up to the next power of 2 (bp->max_tpa_roundup_size) entries and masking the FW TPA ID with that size, so the wrapped ID can never index past the end of the array. | ||||
| CVE-2026-97985 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Update last skb marker in manage_oob(). Fahad Alharbi reported that blocking recv(MSG_PEEK) could hog CPU due to OOB skb. In the following cases, manage_oob() skips OOB skb(s) and returns NULL for the last recv(MSG_PEEK): socketpair(AF_UNIX, SOCK_STREAM, 0, sk); 1) skb -> OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 2) skb -> consumed OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 1, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 3) consumed OOB skb -> OOB skb -> NULL send(sk[0], "a", 1, MSG_OOB); recv(sk[1], buf, 0, MSG_OOB); send(sk[0], "b", 1, MSG_OOB); recv(sk[1], buf, 1, MSG_PEEK); Then, @copied is 0 in unix_stream_read_generic() (zero-length buffer, or non-OOB skb is not yet consumed), and unix_stream_data_wait() is called. However, it returns immediately because @last is not updated in unix_stream_read_generic(), and the thread busy-waits for a new skb. Let's update @last in manage_oob(). For MSG_PEEK, @last is updated with the skipped OOB, and for the non-peek case, @last matches the returned value (when !copied) because OOB is unlinked. Note that manage_oob() is inlined and no stack canary is added. | ||||
| CVE-2026-78397 | 1 Wordpress-extensions | 1 Link Library | 2026-09-26 | 4.0 Medium |
| The Link Library WordPress plugin before 7.9.6 does not validate the destination of a user-supplied URL before falling back to an unprotected fetch when its safe request is rejected, allowing unauthenticated visitors to make the site issue requests to hosts on its internal network and to learn from the response whether an internal service answered. Versions below 7.8.8 are covered by CVE-2025-68600; this entry covers 7.8.8 through 7.9.5, where that fix was incomplete. Exploitation requires the site owner to have published the Link Library WordPress plugin before 7.9.6's public link submission form with reciprocal-link validation enabled. | ||||
| CVE-2026-97526 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/pai: Support CPU hotplug for PMU PAI The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- <command>' crashes the kernel when CPUs are hotplug added during that run. Root cause is the missing allocation of per-CPU data structures for that new CPU. The allocation is dynamic and the first event that has task context creates such a structure for each online CPU. This is not sufficient. CPUs may be offline during event creation and can be set online during the perf run time. For example commands # echo 0 > /sys/devices/system/cpu/cpu1/online # perf stat -e cycles -i -- stress-ng -t10s --matrix X # sleep 1 # echo 1 > /sys/devices/system/cpu/cpu1/online Currently without a CPU hotplug handler, that new CPU has no per-CPU data infrastructure. The scheduler runs PMU call back function pai_add() to install the PMU support for that CPU before the task is being scheduled on that new CPU. In pai_add() instructions mp = this_cpu_ptr(pai_root[idx].mapptr); cpump = mp->mapptr; return a NULL pointer and the result is a kernel panic as variable cpump is used inside that function. Add CPU hotplug support for CPU add and delete and create the necessary per-CPU data infrastructure during CPU hotplug add processing. Same for CPU hotplug remove. This is done when the CPU is offline to ensure the data structures are available when CPU is made online and tasks are scheduled on it. [hca@linux.ibm.com: fixup error path in pai_init()] | ||||
| CVE-2026-95657 | 1 Dgtlmoon | 1 Changedetection.io | 2026-09-26 | 3.5 Low |
| A vulnerability was determined in dgtlmoon Changedetection.io up to 0.55.8. This issue affects the function setCurrentSelectedText of the file changedetectionio/static/js/visual-selector.js of the component Visual Selector. Executing a manipulation of the argument s can lead to cross site scripting. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.60.1 is capable of addressing this issue. This patch is called aac6fcfa594f17511b8ff73e5eaa4f6c33899de0. It is suggested to upgrade the affected component. | ||||
| CVE-2026-95653 | 2 Concretecms-community-store, Nbubna | 2 Community Store, Store | 2026-09-26 | 7.5 High |
| Concrete CMS Community Store before 2.7.8 derives digital product download tokens from order creation timestamps instead of random values, making tokens predictable. Unauthenticated attackers can enumerate sequential order and file identifiers to calculate valid download tokens and retrieve digital goods purchased by other customers. | ||||
| CVE-2026-95396 | 1 Sfturing | 1 Hosp Order | 2026-09-26 | 4.3 Medium |
| A vulnerability was identified in sfturing hosp_order up to 627f426331da8086ce8fff2017d65b1ddef384f8. Affected is an unknown function of the file HospitalController.java of the component Public Search Handlers. The manipulation of the argument Search leads to cross site scripting. The attack can be initiated remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-94640 | 1 Redhat | 3 Enterprise Linux, Openshift, Openshift Container Platform | 2026-09-26 | 7.5 High |
| A flaw was found in rpcbind. This vulnerability allows a remote, unauthenticated attacker to cause a Denial of Service (DoS) by sending a large number of unique requests. The rpcbind service records previously unseen RPC (Remote Procedure Call) statistics in unbounded in-memory lists, leading to persistent memory growth and increased CPU usage. This can degrade or exhaust service availability. | ||||
| CVE-2026-93343 | 2 Webwizards, Wordpress | 2 Marketking, Wordpress | 2026-09-26 | 6.5 Medium |
| MarketKing plugin for WordPress before 2.1.72 contains a missing authorization vulnerability in the marketking_admin_vendors_ajax AJAX action that allows authenticated attackers with subscriber-level access or higher to retrieve the complete vendor directory by sending a crafted AJAX request. Attackers can exploit the absence of capability checks in the vendor management action to retrieve internal user IDs, usernames, and email addresses of all registered vendors, exposing personally identifiable information to any logged-in user regardless of role. | ||||