| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.26.0.000. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Financial Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Financial Management accessible data as well as unauthorized update, insert or delete access to some of Oracle Hyperion Financial Management accessible data. CVSS 3.1 Base Score 8.2 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N). |
| Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.16. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle VM VirtualBox. CVSS 3.1 Base Score 3.2 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:N/I:N/A:L). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Compare iterator types during state pruning
An iterator stack slot can be MEM_RCU or PTR_UNTRUSTED. These states
must not be equal, or the verifier can prune an unsafe path.
Compare the pointer type for STACK_ITER slots. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed()
Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls
nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a
partition device or write through a read-only file descriptor.
Pass flags and open_for_write through and reject disallowed commands
with -EACCES. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix unconfined user namespace restriction forced stack
If a task is already confined by a stack the unprivileged transition
restriction on unconfined is not correctly, applied. This results in
an escape if two transitions through an unconfined profile can be
executed.
Fix this by pushing the check into the per profile label build. The
check will always be done against unconfined and result in a stack of
just the unconfined component when necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject unprivileged writes to reserved $LX* xattrs
Reject setxattr of the reserved $LXUID, $LXGID, $LXMOD and $LXDEV names
from userspace unless the caller has CAP_SYS_ADMIN. |
| Snipe-IT versions before 8.7.0 contain a broken access control vulnerability in AssetModelPolicy where the files() method cascades from assets.files permission, allowing authenticated users to upload and delete file attachments on Asset Model records without the required models.files permission. Attackers with only assets.files permission can mutate shared model file attachments across company boundaries and bypass the dedicated models.files permission intended to restrict file management on the shared Asset Model catalog. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Nexus Dashboard engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20322 are related to improper access control issues that are grouped under the Common Weakness Enumeration (CWE) CWE-284. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20332 are related to improper access control issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-284. |
| HCL BigFix Service Management is affected by a Security Misconfiguration vulnerability, which could allow an authenticated attacker to exploit improper access controls, enabling the unauthorized viewing of restricted data elements across tenant boundaries. |
| A vulnerability in the team folders (formerly group folders) app when used in combination with the workspace app allowed API/REST-only delegated administrators to bypass folder-level authorization controls. The workspace app enables organizations to delegate limited administrative privileges for team folder management via API/REST only, restricting access to folders for which the admin has advanced permissions. |
| The Deck config API allows authenticated users to set board-scoped configuration keys for arbitrary board IDs without validating whether the user owns or has permission to manage the referenced board. |
| The Photos app's filter-based "smart albums" build their file listing using the search configuration (photosSourceFolders) of the user viewing the album, rather than the album owner's configuration. When an album owner shares a smart album with another user, that user's own folder configuration is used to determine which of the owner's files are searched — allowing them to discover files (name, file ID, and other metadata) in folders the album owner never intended to include in the shared album.
This requires the album owner to have shared a filter-based smart album with the attacker; it does not allow access to arbitrary users' files without such a share. |
| vm2 through 3.12.0 exposes Node.js's crypto.setFips() function to untrusted guest code when an embedder explicitly allowlists the crypto builtin for a NodeVM (require.builtin: ['crypto']). The builtin sanitizer (sanitizeCryptoModule in lib/builtin.js) replaces crypto.setEngine but leaves crypto.setFips callable, and the readonly wrapper used to expose the host module does not localize side effects of forwarded host functions. Guest code can therefore call crypto.setFips() to change the FIPS mode of the entire host process; the modified mode is subsequently observed by trusted host code (crypto.getFips() changed from 0 to 1 in the reported test), crossing the NodeVM isolation boundary. Fixed in vm2 3.12.1. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Add vm_bind region with kbo range overlap check
When a VM is created, caller has to specify the range of the address space
carve-out set aside for mapping kernel BO's. That means vm_bind mappings of
UM-exposed BO's should not intersect with that region, but at the moment
we're not checking this.
At first, I thought of giving these values to drm_gpuvm_init() through its
reserve_{offset, range} arguments, but it turns out that is meant for VM
address spans that are not managed through the usual drm_gpuvm split/merge
circuit, so storing the end of the user VA range at VM creation time and
doing a quick check in the vm_bind ioctl path was the simplest workaround.
The new check also makes sure vm_bind range doesn't overflow the size of a
64-bit unsigned integer. That was already being done further down the call
stack inside drm_gpuvm_sm_map -> drm_gpuvm_range_valid, but it's best to
fail early in the driver before GPUVM functions are invoked so that we
won't waste time allocating vm_bind context resources. |
| Joomla Extension - joomgalleryfriends.net - Unauthenticated arbitrary file upload via the TUS endpoint in JoomGallery < 4.4.2 - The TUS endpoint allows arbitrary file uploads, however neither file name nor file extension are under attacker control. Code execution requires non-standard server configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
smack: fix incorrect task context in smack_msg_queue_msgrcv
The smack_msg_queue_msgrcv() function incorrectly checks
the permissions of the 'current' task instead of the
'target' task.
In the msgsnd() syscall path, if a receiver is already waiting,
the pipelined_send() optimization is used to push the message
directly to the receiver task:
ipc/msg.c`pipelined_send():
` smp_store_release(&msr->r_msg, msg)
In this case, the 'sender' (current) task performs the check
on behalf of the 'receiver' task (msr->r_tsk, passed as the
'target' parameter):
ipc/msg.c`pipelined_send():
` security_msg_queue_msgrcv(,, target := msr->r_tsk,,)
However, smack_msg_queue_msgrcv() ignores the 'target' and
checks 'current':
smack_msg_queue_msgrcv(…)
` smk_curacc_msq(isp, MAY_READWRITE); // current task
'current' MAY satisfy smack_msg_queue_msgrcv r/w requirement,
but 'target' (the receiver task) might NOT;
as a result, an unauthorized receiver gets the message,
violating MAC policy.
Test:
1) create a sysv message queue with label “foo”
2) echo "bar foo r" >/smack/load2
3) msgrcv(,,,0,MSG_NOERROR) in "bar"-labeled task.
The task is waiting for the messages ...
4) msgsnd() from a "foo"-labeled task:
"bar"-labeled task gets the message.
This patch fixes the issue by checking permission on the
'target' task instead of 'current'.
(2008-02-04, Casey Schaufler) |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/sysfs: Add lockdown checks to legacy I/O and memory handlers
Currently, the legacy I/O and memory sysfs handlers do not check
security_locked_down(LOCKDOWN_PCI_ACCESS), leaving the legacy_io and
legacy_mem files unprotected when the kernel is locked down.
Commit eb627e17727e ("PCI: Lock down BAR access when the kernel is locked
down") added the check to pci_write_config(), pci_mmap_resource(), and
pci_write_resource_io() to prevent userspace from programming DMA-capable
hardware that could be used to modify kernel code, but did not cover the
legacy handlers.
As a result, root can still write arbitrary I/O ports and map the legacy
I/O and memory spaces while the kernel is locked down, which is the same
capability the lockdown is meant to remove.
Add the same check to pci_write_legacy_io(), pci_mmap_legacy_mem(), and
pci_mmap_legacy_io().
These generic handlers cover both architectures that define HAVE_PCI_LEGACY
(such as Alpha and PowerPC).
[bhelgaas: add Link] |
| Vulnerability in the Oracle Partner Management product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Partner Management. While the vulnerability is in Oracle Partner Management, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Partner Management accessible data as well as unauthorized update, insert or delete access to some of Oracle Partner Management accessible data. CVSS 3.1 Base Score 7.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:C/C:H/I:L/A:N). |
| @fastify/static is a Fastify plugin that serves static files from a configured root directory. In versions before 10.1.4, on a case-insensitive filesystem such as Windows or the default macOS volume, a route guard or allowedPath restriction can be bypassed by altering the letter case of a path segment. The route matcher is case-sensitive while the filesystem is not, so a request that changes the case of a protected segment does not match the guarded route and falls through to the static handler, yet the filesystem resolves it to the same protected file. As a result, an unauthenticated request can read a file that a route guard or allowedPath was configured to protect. The issue does not affect case-sensitive filesystems and is not a directory traversal, since nothing is served from outside the configured root. The issue is fixed in @fastify/static 10.1.4, which validates the requested path against its actual on-disk spelling and rejects case-aliased paths before authorization. As a workaround, serve static files from a case-sensitive filesystem, or ensure route guards and allowedPath rules account for every letter-case variant of the protected paths. |
