| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Root File System Not Mounted as Read-Only configuration vulnerability. This can allow unintended modifications to critical system files, potentially increasing the risk of system compromise or unauthorized changes.This issue affects AION: 2.0. |
| A Potential Command Injection vulnerability in HCL AION.
An This can allow unintended command execution, potentially leading to unauthorized actions on the underlying system.This issue affects AION: 2.0 |
| A vulnerability
Cacheable SSL Page Found vulnerability has been identified
in HCL AION.
Cached data may expose credentials, system identifiers, or internal file paths to attackers with access to the device or browser
This issue affects AION: 2.0. |
| A security vulnerability has been detected in Cesanta Mongoose up to 7.20. This issue affects the function mg_aes_gcm_decrypt of the file /src/tls_aes128.c of the component GCM Authentication Tag Handler. Such manipulation leads to improper verification of cryptographic signature. The attack may be performed from remote. A high complexity level is associated with this attack. The exploitability is assessed as difficult. The exploit has been disclosed publicly and may be used. Upgrading to version 7.21 is capable of addressing this issue. It is advisable to upgrade the affected component. VulDB has contacted the vendor early and they confirmed quickly, that this issue got fixed already. |
| A flaw was identified in the RAR5 archive decompression logic of the libarchive library, specifically within the archive_read_data() processing path. When a specially crafted RAR5 archive is processed, the decompression routine may enter a state where internal logic prevents forward progress. This condition results in an infinite loop that continuously consumes CPU resources. Because the archive passes checksum validation and appears structurally valid, affected applications cannot detect the issue before processing. This can allow attackers to cause persistent denial-of-service conditions in services that automatically process archives. |
| A security flaw has been discovered in AstrBotDevs AstrBot up to 4.22.1. This affects the function create_template of the file astrbot/dashboard/routes/t2i.py of the component Dashboard API. The manipulation results in improper neutralization of special elements used in a template engine. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in pagekit up to 1.0.18. Affected by this issue is some unknown functionality of the file /index.php/admin/system/update/download. The manipulation of the argument url leads to server-side request forgery. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in IhateCreatingUserNames2 AiraHub2 up to 3e4b77fd7d48ed811ffe5b8d222068c17c76495e. Affected is the function connect_stream_endpoint/sync_agents of the file AiraHub.py of the component Endpoint. Performing a manipulation results in server-side request forgery. The attack may be initiated remotely. The exploit has been made public and could be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. Multiple endpoints are affected. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in devlikeapro WAHA up to 2026.3.4. This affects an unknown function of the file src/api/media.controller.ts of the component API Request Handler. This manipulation causes server-side request forgery. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Versions of the package simple-git before 3.36.0 are vulnerable to Remote Code Execution (RCE) due to an incomplete fix for [CVE-2022-25912](https://security.snyk.io/vuln/SNYK-JS-SIMPLEGIT-3112221) that blocks the -c option but not the equivalent --config form. If untrusted input can reach the options argument passed to simple-git, an attacker may still achieve remote code execution by enabling protocol.ext.allow=always and using an ext:: clone source. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: avoid OGM aggregation when skb tailroom is insufficient
When OGM aggregation state is toggled at runtime, an existing forwarded
packet may have been allocated with only packet_len bytes, while a later
packet can still be selected for aggregation. Appending in this case can
hit skb_put overflow conditions.
Reject aggregation when the target skb tailroom cannot accommodate the new
packet. The caller then falls back to creating a new forward packet
instead of appending. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: linearize skb before parsing ND options
br_nd_send() parses neighbour discovery options from ns->opt[] and
assumes that these options are in the linear part of request.
Its callers only guarantee that the ICMPv6 header and target address
are available, so the option area can still be non-linear. Parsing
ns->opt[] in that case can access data past the linear buffer.
Linearize request before option parsing and derive ns from the linear
network header. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: flowlabel: defer exclusive option free until RCU teardown
`ip6fl_seq_show()` walks the global flowlabel hash under the seq-file
RCU read-side lock and prints `fl->opt->opt_nflen` when an option block
is present.
Exclusive flowlabels currently free `fl->opt` as soon as `fl->users`
drops to zero in `fl_release()`. However, the surrounding
`struct ip6_flowlabel` remains visible in the global hash table until
later garbage collection removes it and `fl_free_rcu()` finally tears it
down.
A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that
early `kfree()` and dereference freed option state, triggering a crash
in `ip6fl_seq_show()`.
Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches
the lifetime already required for the enclosing flowlabel while readers
can still reach it under RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: validate MPLS set/set_masked payload length
validate_set() accepted OVS_KEY_ATTR_MPLS as variable-sized payload for
SET/SET_MASKED actions. In action handling, OVS expects fixed-size
MPLS key data (struct ovs_key_mpls).
Use the already normalized key_len (masked case included) and reject
non-matching MPLS action key sizes.
Reject invalid MPLS action payload lengths early. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: defer tunnel netdev_put to RCU release
ovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER already
detached the device. Dropping the netdev reference in destroy can race
with concurrent readers that still observe vport->dev.
Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, let
vport_netdev_free() drop the reference from the RCU callback, matching
the non-tunnel destroy path and avoiding additional synchronization
under RTNL. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - limit RX SG extraction by receive buffer budget
Make af_alg_get_rsgl() limit each RX scatterlist extraction to the
remaining receive buffer budget.
af_alg_get_rsgl() currently uses af_alg_readable() only as a gate
before extracting data into the RX scatterlist. Limit each extraction
to the remaining af_alg_rcvbuf(sk) budget so that receive-side
accounting matches the amount of data attached to the request.
If skcipher cannot obtain enough RX space for at least one chunk while
more data remains to be processed, reject the recvmsg call instead of
rounding the request length down to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_netem: fix out-of-bounds access in packet corruption
In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check()
Reject rt match rules whose addrnr exceeds IP6T_RT_HOPS.
rt_mt6() expects addrnr to stay within the bounds of rtinfo->addrs[].
Validate addrnr during rule installation so malformed rules are rejected
before the match logic can use an out-of-range value. |
| P4 Server versions prior to 2026.1 are configured with insecure default settings that, when exposed to untrusted networks, allow unauthenticated attackers to create arbitrary user accounts, enumerate existing users, authenticate to accounts with no password set, and access depot contents via the built-in 'remote' user. These default settings, taken together, can lead to unauthorized access to source code repositories and other managed assets. The 2026.1 release, expected in May 2026, enforces secure-by-default configurations on upgrade and new installations |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
