| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vim is an open source, command line text editor. Prior to 9.2.0725, the single-byte branch of spell_soundfold_sal() in src/spell.c translates a word through a spell file's SAL sound-folding rules into a caller-owned result buffer, but its result writes are guarded with reslen < MAXWLEN, allowing reslen to reach MAXWLEN before res[reslen] = NUL writes one byte past the end of the MAXWLEN-element stack buffer. A boundary-length word passed to soundfold(), or reached via sound-based spell suggestion while a SAL-based spell language is active under a non-multibyte 8-bit encoding, can corrupt the eval_soundfold() stack frame and crash the editor. This issue is fixed in version 9.2.0725. |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 0.12.0-alpha.1, the email and WeChat account binding endpoints GET /api/oauth/email/bind and GET /api/oauth/wechat/bind used GET requests for state-changing account operations, allowing an attacker to trigger a logged-in user's browser to bind an attacker-controlled email address or OAuth identity in deployments where session cookies could be sent on cross-site navigations. This issue is fixed in version 0.12.0-alpha.1. |
| In checkSsrcCollisionOnRcv of RtpSession.cpp, there is a possible memory safety issue due to a missing null check. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| decompress before 4.2.2 allows arbitrary hardlink creation during archive extraction, enabling file read disclosure and file corruption. When processing hardlink entries (type === 'link'), the x.linkname field from the archive is passed directly to fs.link() without validation (index.js line 113). An attacker can craft an archive with a hardlink entry whose linkname is an absolute path to any file on the same filesystem. This creates a hardlink inside the extraction directory that shares the same inode as the target file, enabling both reading and overwriting the original file's content. Hardlinks are limited to files on the same filesystem and cannot target directories. |
| decompress before 4.2.2 contains an improper path containment check that enables directory traversal and arbitrary file write. The safeMakeDir function (index.js line 29) and the extraction path validation (index.js line 106) use String.indexOf() to verify the resolved path is within the output directory: realDestinationDir.indexOf(realOutputPath) !== 0. This check is flawed because it does not enforce a path separator boundary. For example, "/tmp/app_config".indexOf("/tmp/app") returns 0, incorrectly passing the check even though /tmp/app_config is outside /tmp/app. Combined with the unvalidated symlink creation in the same package, an attacker can write arbitrary files to directories adjacent to the extraction target. This is a bypass of the fix for CVE-2020-12265. The correct check requires appending a path separator: realParentPath.indexOf(realOutputPath + path.sep) !== 0. |
| decompress before 4.2.2 allows arbitrary symlink creation during archive extraction. When processing symlink entries (type === 'symlink'), the x.linkname field from the archive is passed directly to fs.symlink() without validation (index.js line 121). The preventWritingThroughSymlink check on line 98 only applies to file entries, not symlink creation. An attacker can craft an archive with symlink entries pointing to sensitive files outside the extraction directory (e.g., /etc/passwd), enabling information disclosure when the application reads the extracted contents. |
| An Improper Restriction of Communication Channel to Intended Endpoints vulnerability in Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a limited information disclosure and availability impact to the device.
Due to a wrong initialization, a process which should only be able to communicate internally within the device can be reached over the network via an open port. This leads to a device being inadvertently exposed and increased CPU cycles spent processing ingress packets.
This issue affects Junos OS Evolved:
* all versions before 23.2R2-S7-EVO,
* 23.4 versions before 23.4R2-S8-EVO,
* 24.2 versions before 24.2R2-S5-EVO,
* 24.4 versions before 24.4R2-S4-EVO,
* 25.2 versions before 25.2R2-S1-EVO,
* 25.4 versions before 25.4R1-S2-EVO. |
| OpenFGA is an authorization/permission engine built for developers. Prior to 1.18.0, when MySQL is being used as the datastore and authorization decisions rely on case-sensitive user strings, the tuple, changelog, and authorization_model identifier columns can compare case-distinct values such as user:Alice and user:alice as equivalent, causing two distinct check requests to return the same response. This issue is fixed in 1.18.0. |
| An Improper Validation of Specified Quantity in Input vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).
When a specific packet is received from device in the same broadcast domain, an affected system calculates the packet size incorrectly. This causes further packet processing to fail, which triggers an FPC major error, resulting in a FPC reset impacting traffic until the FPC has automatically recovered.
Affected scenarios are: MAP-T, or non-IP traffic encapsulated in IP (e.g. MPLS over GRE).
When this issue happens the following logs can be observed:
fpc<#> CMError: /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb), scope: pfe, category: functional, severity: major, module: MQSS(0), type: LI: Unroll TAIL length overflow, oc_category: default
fpc<#> Performing action reset-fru for error /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb) in module: MQSS(0) with scope: pfe category: functional level: major, oc_category: default
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R2. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on QFX10000 Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).
On all QFX10000 platforms in an EVPN-VxLAN scenario, if an attacker sends IPv6 multicast traffic and these packets reach the non-IRB interface of a spine switch it floods the packet to other spines and all Ethernet Segment Identifier (ESI) leaf switches. This flooding causes the packet to be forwarded in a endless loop, which can lead to saturation of the involved links and in turn impact to legitimate traffic.
This issue affects Junos OS on QFX10000 Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S4.
This issue does not affect Junos version after 24.4 as the QFX10000 Series devices are not supported on newer versions anymore. |
| OpenFGA is an authorization/permission engine built for developers. Prior to 1.18.0, OpenFGA's OIDC authenticator skipped JWT audience validation when authn.method was set to oidc, authn.oidc.issuer was configured, and authn.oidc.audience was not set, allowing a token minted for an unrelated service by the same identity provider to authenticate to OpenFGA. This issue is fixed in 1.18.0. |
| Zen is a firefox-based browser. Prior to 1.21.5b, Zen's glance and split-view context-menu actions, Open link in glance and Split link in new tab, load a page-controlled link URL with the System principal instead of the originating page's principal, allowing a malicious web page to place a link to a file URL that can load with System privileges when opened through either context-menu item and bypass the content-to-file security check that blocks an ordinary click. This issue is fixed in version 1.21.5b. |
| A missing permission check in Jenkins Contrast Continuous Application Security Plugin 3.11 and earlier allows attackers with Overall/Read permission to connect to an attacker-specified URL using an attacker-specified username, API key, and service key. |
| Missing permission checks in Jenkins Contrast Continuous Application Security Plugin 3.11 and earlier allow attackers with Overall/Read permission to enumerate the names of configured Contrast metadata. |
| Buffer Overflow vulnerability in UTT nv518G nv518GV3v3.2.7-210919-161313 allows a remote attacker to cause a denial of service via the gohead/sub_425994 component |
| Use after free in WebUSB in Google Chrome on Mac prior to 150.0.7871.47 allowed a local attacker to execute arbitrary code via a malicious peripheral. (Chromium security severity: Critical) |
| Use after free in Chromoting in Google Chrome on ChromeOS prior to 150.0.7871.47 allowed a remote attacker to execute arbitrary code via malicious network traffic. (Chromium security severity: Critical) |
| Insufficient validation of untrusted input in Skia in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical) |
| Use after free in Chromoting in Google Chrome on Windows prior to 150.0.7871.47 allowed a remote attacker to execute arbitrary code via malicious network traffic. (Chromium security severity: Critical) |
| Insufficient validation of untrusted input in Downloads in Google Chrome prior to 150.0.7871.47 allowed an attacker who convinced a user to install a malicious extension to execute arbitrary code via a crafted Chrome Extension. (Chromium security severity: High) |
