| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: call the security_mmap_file() LSM hook in remap_file_pages()
The remap_file_pages syscall handler calls do_mmap() directly, which
doesn't contain the LSM security check. And if the process has called
personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for
RW pages, this will actually result in remapping the pages to RWX,
bypassing a W^X policy enforced by SELinux.
So we should check prot by security_mmap_file LSM hook in the
remap_file_pages syscall handler before do_mmap() is called. Otherwise, it
potentially permits an attacker to bypass a W^X policy enforced by
SELinux.
The bypass is similar to CVE-2016-10044, which bypass the same thing via
AIO and can be found in [1].
The PoC:
$ cat > test.c
int main(void) {
size_t pagesz = sysconf(_SC_PAGE_SIZE);
int mfd = syscall(SYS_memfd_create, "test", 0);
const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE,
MAP_SHARED, mfd, 0);
unsigned int old = syscall(SYS_personality, 0xffffffff);
syscall(SYS_personality, READ_IMPLIES_EXEC | old);
syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0);
syscall(SYS_personality, old);
// show the RWX page exists even if W^X policy is enforced
int fd = open("/proc/self/maps", O_RDONLY);
unsigned char buf2[1024];
while (1) {
int ret = read(fd, buf2, 1024);
if (ret <= 0) break;
write(1, buf2, ret);
}
close(fd);
}
$ gcc test.c -o test
$ ./test | grep rwx
7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted)
[PM: subject line tweaks] |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: Block path traversal
Most firmware names are hardcoded strings, or are constructed from fairly
constrained format strings where the dynamic parts are just some hex
numbers or such.
However, there are a couple codepaths in the kernel where firmware file
names contain string components that are passed through from a device or
semi-privileged userspace; the ones I could find (not counting interfaces
that require root privileges) are:
- lpfc_sli4_request_firmware_update() seems to construct the firmware
filename from "ModelName", a string that was previously parsed out of
some descriptor ("Vital Product Data") in lpfc_fill_vpd()
- nfp_net_fw_find() seems to construct a firmware filename from a model
name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I
think parses some descriptor that was read from the device.
(But this case likely isn't exploitable because the format string looks
like "netronome/nic_%s", and there shouldn't be any *folders* starting
with "netronome/nic_". The previous case was different because there,
the "%s" is *at the start* of the format string.)
- module_flash_fw_schedule() is reachable from the
ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as
GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is
enough to pass the privilege check), and takes a userspace-provided
firmware name.
(But I think to reach this case, you need to have CAP_NET_ADMIN over a
network namespace that a special kind of ethernet device is mapped into,
so I think this is not a viable attack path in practice.)
Fix it by rejecting any firmware names containing ".." path components.
For what it's worth, I went looking and haven't found any USB device
drivers that use the firmware loader dangerously. |
| Substance3D - Designer versions 15.1.0 and earlier are affected by an Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability that could lead to arbitrary file system read. An attacker could exploit this vulnerability to access sensitive files and directories outside the intended access scope. Exploitation of this issue requires user interaction in that a victim must open a malicious file. Scope is changed. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/qm - inject error before stopping queue
The master ooo cannot be completely closed when the
accelerator core reports memory error. Therefore, the driver
needs to inject the qm error to close the master ooo. Currently,
the qm error is injected after stopping queue, memory may be
released immediately after stopping queue, causing the device to
access the released memory. Therefore, error is injected to close master
ooo before stopping queue to ensure that the device does not access
the released memory. |
| A race condition exists in PaperCut MF when processing badge-swipe data from certain HP multifunction devices. Under specific network conditions involving dropped packets and out-of-order sequence counters, the server may incorrectly process fragmented data chunks. If a sequence reset notification fails to reach the server, the server may reject the initial data chunk while erroneously accepting subsequent chunks before a connection reset completes.
This leads to the registration of a truncated badge ID string. While this typically results in an authentication failure, the vulnerability is compounded in environments utilizing custom badge-ID post-processing scripts. In such configurations, the truncated string may be transformed into a valid ID belonging to a different user, leading to unauthorized session establishment (Incorrect User Login) on the device. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),
which is false. The subsequent get_len() call then dereferences
*bs->cur++, reading 1 byte past the end of the buffer. If that byte
has bit 7 set, get_len() reads a second byte as well.
This can be triggered remotely by sending a crafted Q.931 SETUP message
with a User-User Information Element containing exactly 2 bytes of
PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with
the nf_conntrack_h323 helper active. The decoder fully consumes the
PER buffer before reaching this code path, resulting in a 1-2 byte
heap-buffer-overflow read confirmed by AddressSanitizer.
Fix this by checking for 2 bytes (the maximum that get_len() may read)
instead of the uninitialized `len`. This matches the pattern used at
every other get_len() call site in the same file, where the caller
checks for 2 bytes of available data before calling get_len(). |
| In the Linux kernel, the following vulnerability has been resolved:
team: avoid NETDEV_CHANGEMTU event when unregistering slave
syzbot is reporting
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3
ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_hold include/linux/netdevice.h:4429 [inline]
inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286
inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline]
netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886
netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907
dev_set_mtu+0x126/0x260 net/core/dev_api.c:248
team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333
team_del_slave drivers/net/team/team_core.c:1936 [inline]
team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2281 [inline]
call_netdevice_notifiers net/core/dev.c:2295 [inline]
__dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592
do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
problem. Ido Schimmel found steps to reproduce
ip link add name team1 type team
ip link add name dummy1 mtu 1499 master team1 type dummy
ip netns add ns1
ip link set dev dummy1 netns ns1
ip -n ns1 link del dev dummy1
and also found that the same issue was fixed in the bond driver in
commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when
unregistering slave").
Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net:
hold netdev instance lock during sysfs operations") and commit 303a8487a657
("net: s/__dev_set_mtu/__netif_set_mtu/") also applied. |
| An improper neutralization of special elements used in an sql command ('sql injection') vulnerability in Fortinet FortiNDR 7.6.0 through 7.6.2, FortiNDR 7.4.0 through 7.4.9, FortiNDR 7.2 all versions, FortiNDR 7.1 all versions, FortiNDR 7.0 all versions may allow an authenticated attacker to execute unauthorized code or commands via specifically crafted HTTP requests. |
| A out-of-bounds write vulnerability in Fortinet FortiOS 7.6.0 through 7.6.3, FortiOS 7.4.0 through 7.4.8, FortiOS 7.2.0 through 7.2.11 allows attacker to execute unauthorized code or commands via specially crafted packets. |
| WGDashboard is a dashboard for WireGuard VPN. Prior to 4.3.2, there are critical vulnerabilities affecting WGDashboard that, if exploited, could allow unauthorized parties to access the host file system without authentication. This vulnerability is fixed in 4.3.2. |
| An improper neutralization of argument delimiters in a command ('argument injection') vulnerability in Fortinet FortiDeceptor 6.0.0 through 6.0.2, FortiDeceptor 5.3.0 through 5.3.3, FortiDeceptor 5.2.0 through 5.2.1, FortiDeceptor 5.1 all versions, FortiDeceptor 5.0 all versions may allow an authenticated attacker with at least read-only admin permission to read log files via HTTP crafted requests. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Add missing platform data entries for SM8750
Two platform-data fields for SM8750 were missed:
- get_vpu_buffer_size = iris_vpu33_buf_size
Without this, the driver fails to allocate the required internal
buffers, leading to basic decode/encode failures during session
bring-up.
- max_core_mbps = ((7680 * 4320) / 256) * 60
Without this capability exposed, capability checks are incomplete and
v4l2-compliance for encoder fails. |
| An improper neutralization of special elements used in an SQL Command ("SQL Injection&") vulnerability [CWE-89] vulnerability in Fortinet FortiMail 7.6.0 through 7.6.3, FortiMail 7.4.0 through 7.4.5, FortiMail 7.2.0 through 7.2.8 allows an authenticated privileged attacker to execute unauthorized code or commands via specifically crafted HTTP or HTTPS requests. |
| An improper neutralization of special elements used in an OS command ("OS Command Injection") vulnerability [CWE-78] vulnerability in Fortinet FortiAP 7.6.0 through 7.6.2, FortiAP 7.4.0 through 7.4.5, FortiAP 7.2 all versions, FortiAP 7.0 all versions, FortiAP 6.4 all versions, FortiAP-U 7.0.0 through 7.0.5, FortiAP-U 6.2 all versions, FortiAP-W2 7.4.0 through 7.4.4, FortiAP-W2 7.2 all versions, FortiAP-W2 7.0 all versions allows an authenticated privileged attacker to execute unauthorized code or commands via crafted CLI requests. |
| An improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiAP 7.6.0 through 7.6.2, FortiAP 7.4.0 through 7.4.5, FortiAP 7.2 all versions, FortiAP 7.0 all versions, FortiAP 6.4 all versions, FortiAP-W2 7.4.0 through 7.4.4, FortiAP-W2 7.2 all versions, FortiAP-W2 7.0 all versions may allow an authenticated attacker to execute unauthorized code or commands via a specifically crafted cli command. |
| JunoClaw is an agentic AI platform built on Juno Network. Prior to 0.x.y-security-1, plugin-shell's run_command wrapped every agent-supplied command in 'sh -c' / 'cmd /C' and passed the full argument string to the shell's parser, allowing shell metacharacters in agent-supplied arguments to be interpreted as command syntax. This vulnerability is fixed in 0.x.y-security-1. |
| The imgaug library thru 0.4.0 contains an insecure deserialization vulnerability in its BackgroundAugmenter class within the multicore.py module. The class uses Python's pickle module to deserialize data received via a multiprocessing queue in the _augment_images_worker() method without any safety checks. An attacker who can influence the data placed into this queue (e.g., through social engineering, malicious input scripts, or a compromised shared queue) can provide a malicious pickle payload. When deserialized, this payload can execute arbitrary code in the context of the worker process, leading to remote or local code execution depending on the deployment scenario. |
| The mem0 1.0.0 server lacks authentication and authorization controls for its memory deletion API endpoint (DELETE /memories). The endpoint allows unauthenticated users to delete memory records by specifying arbitrary user identifiers (e.g., user_id, run_id, agent_id) in the request query parameters. A remote attacker can exploit this by sending unauthenticated DELETE requests to erase memory data for any user, leading to unauthorized data loss and denial of service. |
| An issue in Open Source Kubectl MCP Server v1.1.1 allows attackers to execute arbitrary code on a victim system via user interaction with a crafted HTML page. |
| Improper Handling of Case Sensitivity vulnerability in LockOutRealm in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.21, from 10.1.0-M1 through 10.1.54, from 9.0.0.M1 through 9.0.117, from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109.
Older unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.22, 10.1.55 or 9.0.118 which fix the issue. |
