| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix a leak when a group is evicted before the tiler OOM is serviced
A group ref is tied to the pending tiler_oom_work, so we need to release
it if the cancel was effective. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/fprobe: Fix NULL pointer dereference in fprobe_fgraph_entry()
fprobe_fgraph_entry() sizes a shadow-stack reservation in one walk of
the per-ip fprobe list and fills it in a second walk, both under
rcu_read_lock() only. A fprobe registered on an already-live ip can
become visible between the two walks, so the fill walk processes an
exit_handler the sizing walk did not count and used runs past
reserved_words. If the sizing walk counted nothing, fgraph_data is NULL
and the first write_fprobe_header() faults:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:fprobe_fgraph_entry+0xa38/0xf10 kernel/trace/fprobe.c:167
Call Trace:
<TASK>
function_graph_enter_regs+0x44c/0xa10 kernel/trace/fgraph.c:677
ftrace_graph_func+0xc5/0x140 arch/x86/kernel/ftrace.c:671
__kernel_text_address+0x9/0x40 kernel/extable.c:78
arch_stack_walk+0x117/0x170 arch/x86/kernel/stacktrace.c:26
kmem_cache_free+0x188/0x580 mm/slub.c:6378
tcp_data_queue+0x18d/0x6550 net/ipv4/tcp_input.c:5590
[...]
</TASK>
The list cannot be frozen across the two walks, so skip a node that does
not fit the reservation and count it as missed. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Remove setting of AS_RELEASE_ALWAYS for symlinks and mountpoints
Regular AFS files correctly use afs_file_aops which have release_folio
set as netfs_release_folio, so AS_RELEASE_ALWAYS is valid for them
when fscache is enabled (set via afs_vnode_set_cache()).
Symlinks and mountpoints in AFS use afs_dir_aops, which does not provide
a release_folio callback. However, afs_apply_status() unconditionally
calls mapping_set_release_always() for these.
In such case when memory management code attempts to release folios,
filemap_release_folio() checks folio_needs_release() which
returns true due to AS_RELEASE_ALWAYS being set. Since there is no
release_folio callback, it falls through to try_to_free_buffers(),
which at present expects buffer_heads to be not null. For symlinks
and mountpoints without buffer_heads, this causes pointer dereference.
[dh: Added more bits that were missed] |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix writethrough to use collection offload
Fix writethrough write to set NETFS_RREQ_OFFLOAD_COLLECTION on the request
so that collection is processed asynchronously rather than only right at
the end - and also so that asynchronous O_SYNC writes get collected at all. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pt: Fix NULL pointer dereference in xe_pt_zap_ptes_entry()
The page-table walk framework may pass a NULL *child pointer for
unpopulated entries. xe_pt_zap_ptes_entry() called container_of(*child)
before checking for NULL, then dereferenced the result, causing a crash.
Move the container_of() call after a NULL guard, so the function returns
early instead of proceeding with an invalid pointer. XE_WARN_ON is kept
to help root cause the issue, but we now bail instead of crashing the
driver.
v2: Comment that triggering XE_WARN_ON is unexpected behavior (Matt Brost)
(cherry picked from commit b9297d19d9df5d4b6c994648570c5dcd1cac68ff) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: fix NPD in bo_meminfo()
When a buffer object is purged, its ttm.resource is set to NULL via the
TTM pipeline gutting flow. However, the BO remains in the client's
object list until userspace explicitly closes the GEM handle. If memory
stats are queried during this time, accessing bo->ttm.resource->mem_type
will result in a NULL pointer dereference.
Fix this by safely skipping purged BOs in bo_meminfo, as they no longer
consume any memory.
User is getting NPD on device resume, and possible theory is that in
bo_move(), if we need to evict something to SYSTEM to save the CCS state,
but the BO is marked as dontneed, this won't trigger a move but will
nuke the pages, leaving us with a NULL bo resource. And the meminfo()
doesn't look ready to handle a NULL resource.
v2 (Sashiko):
- There could potentially be other cases where we might end up with a
NULL resource, so make this a general NULL check for now.
(cherry picked from commit c9a8e7daa0afe3161111e27fd92176e608c7f186) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt()
On links faster than ~34 Gbps, where byte rate may exceed 2^32-1
(~ 4.3 GBps), the comparison result becomes incorrect because the
truncated value no longer reflects the actual estimator rate.
Fix by changing the local variables to u64. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: bitland-mifs-wmi: Fix NULL pointer dereference during suspend/resume
The driver registers two distinct WMI devices: a control device
(BITLAND_WMI_CONTROL) and an event device (BITLAND_WMI_EVENT). During
the probe phase, the event device handling path returns early before
initializing the platform profile device (data->pp_dev), leaving it
NULL.
However, the PM sleep operations are registered globally for the WMI
driver and are triggered for both devices. When entering suspend, the
event device invokes bitland_mifs_wmi_suspend(), which passes the
uninitialized data->pp_dev (NULL) into laptop_profile_get(). This leads
to a NULL pointer dereference inside dev_get_drvdata(), causing a
kernel Oops and halting the suspend sequence.
Fix this by adding a validity check for data->pp_dev in both the suspend
and resume callbacks, safely skipping profile operations for the event
device. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Reject invalid indirect BO handle in indirect CSD setup
v3d_get_cpu_indirect_csd_params() looks up the indirect buffer object
from a userspace-supplied handle but never checks the result. A bogus
or stale handle makes drm_gem_object_lookup() return NULL, which is
then stored in info->indirect and only dereferenced later when the
indirect CSD job runs, turning a userspace mistake into a NULL pointer
dereference in the kernel.
Bail out with -ENOENT as soon as the lookup fails, so the bad handle is
rejected at submission time. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cake: reject overhead values that underflow length
CAKE accepts signed overhead values and stores them in an s16, but the
adjusted packet length calculation uses unsigned arithmetic. A negative
effective length can therefore wrap to a large value.
Such configurations make rate accounting depend on integer wraparound
rather than on the packet size userspace intended to model. A static
netlink lower bound is not enough because packets reaching CAKE can be
smaller than any reasonable manual-overhead allowance.
Fold the signed overhead adjustment into the existing datapath MPU clamp
so negative adjusted lengths are clamped before link-layer framing
adjustments. |
| In the Linux kernel, the following vulnerability has been resolved:
dm era: fix NULL pointer dereference in metadata_open()
metadata_open() returns NULL when kzalloc_obj() fails, but the
caller era_ctr() only checks IS_ERR(md). Since IS_ERR(NULL)
returns false, the NULL pointer is treated as a valid result
and later assigned to era->md, leading to a NULL pointer
dereference when the metadata is accessed.
Fix this by returning ERR_PTR(-ENOMEM) on allocation failure,
consistent with dm-cache-metadata.c, dm-thin-metadata.c, and
dm-clone-metadata.c which all use ERR_PTR(-ENOMEM) for the
same pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/remotes: Fix leak in trace_remote_alloc_buffer() error path
If page allocation fails in trace_remote_alloc_buffer(), desc->nr_cpus
is not yet incremented for the current CPU. As a consequence, on error,
half-allocated rb_desc will not be freed in trace_remote_free_buffer().
Increment desc->nr_cpus as soon as the first allocation for the current
CPU has succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: fix refcount leak in mlxsw_sp_vrs_lpm_tree_replace()
When mlxsw_sp_vrs_lpm_tree_replace() fails after replacing some VRs,
the error rollback loop does not correctly revert the preceding
replacements. The loop decrements the index but fails to update the
vr pointer, which still points to the VR that caused the failure. As
a result, the condition and the rollback call always operate on the
same VR, potentially calling mlxsw_sp_vr_lpm_tree_replace() multiple
times on it while never rolling back the earlier VRs. Those VRs
continue to hold a reference to new_tree acquired via
mlxsw_sp_lpm_tree_hold(), leaking the reference count of new_tree.
Fix by reinitializing vr inside the error loop with the updated index:
vr = &mlxsw_sp->router->vrs[i];
so that the loop correctly iterates over all VRs that were actually
replaced. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: vsie: Add missing radix_tree_preload() in _gaccess_shadow_fault()
Add missing radix_tree_preload() in _gaccess_shadow_fault() to
guarantee forward progress. The core of _gaccess_shadow_fault() has
been split into ___gaccess_shadow_fault() in order to simplify locking. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory
kvm_s390_get_cmma_bits() allocates its output buffer with vmalloc(),
which does not zero the returned pages:
values = vmalloc(args->count);
In the non-peek (migration) path, dat_get_cmma() reports a byte count
spanning from the first to the last dirty page, but __dat_get_cmma_pte()
writes values[gfn - start] only for pages whose CMMA dirty bit is set.
The walk uses DAT_WALK_IGN_HOLES, so clean and unmapped pages that lie
between two dirty pages within the reported span are visited but never
store their byte. Those gaps (up to KVM_S390_MAX_BIT_DISTANCE pages
each) stay uninitialized yet fall inside [0, count) and are copied out
by copy_to_user(), disclosing stale kernel memory to user space.
Before the switch to the new gmap implementation the buffer was fully
populated for every gfn in the span, so no uninitialized bytes were
exposed; the dirty-only walk introduced the leak.
Use vzalloc() so the gaps read back as zero. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: hecubafb: fix potential memory leak in hecubafb_probe()
The memory allocated for pagerefs in fb_deferred_io_init() is not freed
on the error path. Fix it by calling fb_deferred_io_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: efifb: fix memory leak in efifb_probe()
Since commit 73ce73c30ba9 ("fbdev: Transfer video= option strings to
caller; clarify ownership") the string returned from fb_get_options()
is expected to be freed by the caller, but the string is not freed in
efifb_probe(). Fix that by freeing the option string after setup. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: tdfxfb: fix potential memory leak in tdfxfb_probe()
In tdfxfb_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() when CONFIG_FB_3DFX_I2C is defined, is not
freed in the subsequent error paths.
Fix that by calling fb_destroy_modelist(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: carminefb: fix potential memory leak in alloc_carmine_fb()
The memory allocated for modelist in fb_videomode_to_modelist() is not
freed in the subsequent error path.
Fix that by calling fb_destroy_modelist() |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: vesafb: fix memory leak in vesafb_probe()
Since commit 73ce73c30ba9 ("fbdev: Transfer video= option strings to
caller; clarify ownership") the string returned from fb_get_options()
is expected to be freed by the caller. But the string is not freed in
vesafb_probe(). Fix that by freeing the option string after setup. |
