| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When SSL profiles are configured on a virtual server, undisclosed traffic can cause the virtual server to stop processing new client connections. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When an SSL profile is configured on a virtual server on BIG-IP Virtual Edition (VE) without Intel QuickAssist Technology (QAT) or on BIG-IP hardware platforms with the database variable crypto.hwacceleration set to disabled, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When a BIG-IP Advanced WAF or ASM security policy is configured on a virtual server, undisclosed requests can cause the bd process to terminate.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/gsp: drop WARN_ON in ACPI probes
These WARN_ONs seem to trigger a lot, and we don't seem to have a
plan to fix them, so just drop them, as they are most likely
harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-core: Disable LPM on ST1000DM010-2EP102
According to a user report, the ST1000DM010-2EP102 has problems with LPM,
causing random system freezes. The drive belongs to the same BarraCuda
family as the ST2000DM008-2FR102 which has the same issue. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Prevent interrupt storm on host controller error (HCE)
The xHCI controller reports a Host Controller Error (HCE) in UAS Storage
Device plug/unplug scenarios on Android devices. HCE is checked in
xhci_irq() function and causes an interrupt storm (since the interrupt
isn’t cleared), leading to severe system-level faults.
When the xHC controller reports HCE in the interrupt handler, the driver
only logs a warning and assumes xHC activity will stop as stated in xHCI
specification. An interrupt storm does however continue on some hosts
even after HCE, and only ceases after manually disabling xHC interrupt
and stopping the controller by calling xhci_halt().
Add xhci_halt() to xhci_irq() function where STS_HCE status is checked,
mirroring the existing error handling pattern used for STS_FATAL errors.
This only fixes the interrupt storm. Proper HCE recovery requires resetting
and re-initializing the xHC. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: luo_file: remember retrieve() status
LUO keeps track of successful retrieve attempts on a LUO file. It does so
to avoid multiple retrievals of the same file. Multiple retrievals cause
problems because once the file is retrieved, the serialized data
structures are likely freed and the file is likely in a very different
state from what the code expects.
The retrieve boolean in struct luo_file keeps track of this, and is passed
to the finish callback so it knows what work was already done and what it
has left to do.
All this works well when retrieve succeeds. When it fails,
luo_retrieve_file() returns the error immediately, without ever storing
anywhere that a retrieve was attempted or what its error code was. This
results in an errored LIVEUPDATE_SESSION_RETRIEVE_FD ioctl to userspace,
but nothing prevents it from trying this again.
The retry is problematic for much of the same reasons listed above. The
file is likely in a very different state than what the retrieve logic
normally expects, and it might even have freed some serialization data
structures. Attempting to access them or free them again is going to
break things.
For example, if memfd managed to restore 8 of its 10 folios, but fails on
the 9th, a subsequent retrieve attempt will try to call
kho_restore_folio() on the first folio again, and that will fail with a
warning since it is an invalid operation.
Apart from the retry, finish() also breaks. Since on failure the
retrieved bool in luo_file is never touched, the finish() call on session
close will tell the file handler that retrieve was never attempted, and it
will try to access or free the data structures that might not exist, much
in the same way as the retry attempt.
There is no sane way of attempting the retrieve again. Remember the error
retrieve returned and directly return it on a retry. Also pass this
status code to finish() so it can make the right decision on the work it
needs to do.
This is done by changing the bool to an integer. A value of 0 means
retrieve was never attempted, a positive value means it succeeded, and a
negative value means it failed and the error code is the value. |
| jq is a command-line JSON processor. In 1.8.1 and earlier, jv_contains recurses into nested arrays/objects with no depth limit. With a sufficiently nested input structure (built programmatically with reduce, since the JSON parser caps at depth 10000), the C stack is exhausted. |
| Sensitive information disclosure vulnerability exists in the undisclosed iControl REST endpoint and TMOS Shell (tmsh) command which may allow an authenticated attacker with resource administrator role privileges to view sensitive information. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| On an HTTP/2 virtual server with Layer 7 DoS Protection configured, undisclosed traffic can result in an increase in memory consumption causing the Traffic Management Microkernel (TMM) process to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A vulnerability exists in BIG-IP and BIG-IQ systems where a highly privileged, authenticated attacker with at least the Resource Administrator role can create SNMP configuration objects through iControl REST or the TMOS shell (tmsh) resulting in privilege escalation. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A vulnerability exists in BIG-IP systems where a highly privileged, authenticated attacker with at least the Resource Administrator role can modify configuration objects resulting in privilege escalation. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A vulnerability exists in iControl REST where a highly privileged, authenticated attacker with at least the Manager role can create configuration objects that allow running arbitrary commands.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| An authenticated attacker's undisclosed requests to BIG-IP iControl REST can lead to an information leak of BIG-IP local user account names. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Incorrect permission assignment vulnerabilities exist in BIG-IP and BIG-IQ TMOS Shell (tmsh) network diagnostics commands and in BIG-IP iControl REST. These vulnerabilities may allow an authenticated attacker to view the network status of destination systems.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A malicious module proxy can exploit a flaw in the go command's validation of module checksums to bypass checksum database validation. This vulnerability affects any user using an untrusted module proxy (GOMODPROXY) or checksum database (GOSUMDB). A malicious module proxy can serve altered versions of the Go toolchain. When selecting a different version of the Go toolchain than the currently installed toolchain (due to the GOTOOLCHAIN environment variable, or a go.work or go.mod with a toolchain line), the go command will download and execute a toolchain provided by the module proxy. A malicious module proxy can bypass checksum database validation for this downloaded toolchain. Since this vulnerability affects the security of toolchain downloads, setting GOTOOLCHAIN to a fixed version is not sufficient. You must upgrade your base Go toolchain. The go tool always validates the hash of a toolchain before executing it, so fixed versions will refuse to execute any cached, altered versions of the toolchain. The go tool trusts go.sum files to contain accurate hashes of the current module's dependencies. A malicious proxy exploiting this vulnerability to serve an altered module will have caused an incorrect hash to be recorded in the go.sum. Users who have configured a non-trusted GOPROXY can determine if they have been affected by running "rm go.sum ; go mod tidy ; go mod verify", which will revalidate all dependencies of the current module. The specific flaw in more detail: The go command consults the checksum database to validate downloaded modules, when a module is not listed in the go.sum file. It verifies that the module hash reported by the checksum database matches the hash of the downloaded module. If, however, the checksum database returns a successful response that contains no entry for the module, the go command incorrectly permitted validation to succeed. A module proxy may mirror or proxy the checksum database, in which case the go command will not connect to the checksum database directly. Checksums reported by the checksum database are cryptographically signed, so a malicious proxy cannot alter the reported checksum for a module. However, a proxy which returns an empty checksum response, or a checksum response for an unrelated module, could cause the go command to proceed as if a downloaded module has been validated. |
| CVE-2026-27142 fixed a vulnerability in which URLs were not correctly escaped inside of a <meta> tag's <content> attribute. If the URL content were to insert ASCII whitespaces around the '=' rune inside of the <content> attribute, the escaper would fail to similarly escape it, leading to XSS. |
| fast-xml-builder builds XML from JSON. In 1.1.5, the fix for CVE-2026-41650 in fast-xml-parser sanitizes -- sequences in XML comment content using .replace(/--/g, '- -'). This skip the values containing three consecutive dashes (e.g., --->...), allowing an attacker to break out of an XML comment and inject arbitrary XML/HTML content. This vulnerability is fixed in 1.1.6. |
| Next.js is a React framework for building full-stack web applications. From 14.2.0 to before 15.5.16 and 16.2.5, applications using React Server Components can be vulnerable to cache poisoning when shared caches do not correctly partition response variants. Under affected conditions, an attacker can cause an RSC response to be served from the original URL and poison shared cache entries so later visitors receive component payloads instead of the expected HTML. This vulnerability is fixed in 15.5.16 and 16.2.5. |
| A vulnerability exists in BIG-IP scripted monitors that may allow an authenticated attacker with the Resource Administrator or Administrator role to execute arbitrary system commands with higher privileges. In appliance mode deployments, a successful exploit can allow the attacker to cross a security boundary. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
