| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Array index may go out of bound
Klocwork reports array 'vha->host_str' of size 16 may use index value(s)
16..19. Use snprintf() instead of sprintf(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle case when repair happens with dev-replace
[BUG]
There is a bug report that a BUG_ON() in btrfs_repair_io_failure()
(originally repair_io_failure() in v6.0 kernel) got triggered when
replacing a unreliable disk:
BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3
kernel BUG at fs/btrfs/extent_io.c:2380!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2
Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs]
Call Trace:
<TASK>
clean_io_failure+0x14d/0x180 [btrfs]
end_bio_extent_readpage+0x412/0x6e0 [btrfs]
? __switch_to+0x106/0x420
process_one_work+0x1c7/0x380
worker_thread+0x4d/0x380
? rescuer_thread+0x3a0/0x3a0
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
[CAUSE]
Before the BUG_ON(), we got some read errors from the replace target
first, note the mirror number (3, which is beyond RAID1 duplication,
thus it's read from the replace target device).
Then at the BUG_ON() location, we are trying to writeback the repaired
sectors back the failed device.
The check looks like this:
ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical,
&map_length, &bioc, mirror_num);
if (ret)
goto out_counter_dec;
BUG_ON(mirror_num != bioc->mirror_num);
But inside btrfs_map_block(), we can modify bioc->mirror_num especially
for dev-replace:
if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 &&
!need_full_stripe(op) && dev_replace->tgtdev != NULL) {
ret = get_extra_mirror_from_replace(fs_info, logical, *length,
dev_replace->srcdev->devid,
&mirror_num,
&physical_to_patch_in_first_stripe);
patch_the_first_stripe_for_dev_replace = 1;
}
Thus if we're repairing the replace target device, we're going to
trigger that BUG_ON().
But in reality, the read failure from the replace target device may be
that, our replace hasn't reached the range we're reading, thus we're
reading garbage, but with replace running, the range would be properly
filled later.
Thus in that case, we don't need to do anything but let the replace
routine to handle it.
[FIX]
Instead of a BUG_ON(), just skip the repair if we're repairing the
device replace target device. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to check readonly condition correctly
With below case, it can mount multi-device image w/ rw option, however
one of secondary device is set as ro, later update will cause panic, so
let's introduce f2fs_dev_is_readonly(), and check multi-devices rw status
in f2fs_remount() w/ it in order to avoid such inconsistent mount status.
mkfs.f2fs -c /dev/zram1 /dev/zram0 -f
blockdev --setro /dev/zram1
mount -t f2fs dev/zram0 /mnt/f2fs
mount: /mnt/f2fs: WARNING: source write-protected, mounted read-only.
mount -t f2fs -o remount,rw mnt/f2fs
dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=8192
kernel BUG at fs/f2fs/inline.c:258!
RIP: 0010:f2fs_write_inline_data+0x23e/0x2d0 [f2fs]
Call Trace:
f2fs_write_single_data_page+0x26b/0x9f0 [f2fs]
f2fs_write_cache_pages+0x389/0xa60 [f2fs]
__f2fs_write_data_pages+0x26b/0x2d0 [f2fs]
f2fs_write_data_pages+0x2e/0x40 [f2fs]
do_writepages+0xd3/0x1b0
__writeback_single_inode+0x5b/0x420
writeback_sb_inodes+0x236/0x5a0
__writeback_inodes_wb+0x56/0xf0
wb_writeback+0x2a3/0x490
wb_do_writeback+0x2b2/0x330
wb_workfn+0x6a/0x260
process_one_work+0x270/0x5e0
worker_thread+0x52/0x3e0
kthread+0xf4/0x120
ret_from_fork+0x29/0x50 |
| In the Linux kernel, the following vulnerability has been resolved:
leds: led-core: Fix refcount leak in of_led_get()
class_find_device_by_of_node() calls class_find_device(), it will take
the reference, use the put_device() to drop the reference when not need
anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix null pointer panic in tracepoint in __replace_atomic_write_block
We got a kernel panic if old_addr is NULL.
https://bugzilla.kernel.org/show_bug.cgi?id=217266
BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
<TASK>
f2fs_commit_atomic_write+0x619/0x990 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43]
__f2fs_ioctl+0xd8e/0x4080 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43]
? vfs_write+0x2ae/0x3f0
? vfs_write+0x2ae/0x3f0
__x64_sys_ioctl+0x91/0xd0
do_syscall_64+0x5c/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f69095fe53f |
| In the Linux kernel, the following vulnerability has been resolved:
tty: fix out-of-bounds access in tty_driver_lookup_tty()
When specifying an invalid console= device like console=tty3270,
tty_driver_lookup_tty() returns the tty struct without checking
whether index is a valid number.
To reproduce:
qemu-system-x86_64 -enable-kvm -nographic -serial mon:stdio \
-kernel ../linux-build-x86/arch/x86/boot/bzImage \
-append "console=ttyS0 console=tty3270"
This crashes with:
[ 0.770599] BUG: kernel NULL pointer dereference, address: 00000000000000ef
[ 0.771265] #PF: supervisor read access in kernel mode
[ 0.771773] #PF: error_code(0x0000) - not-present page
[ 0.772609] Oops: 0000 [#1] PREEMPT SMP PTI
[ 0.774878] RIP: 0010:tty_open+0x268/0x6f0
[ 0.784013] chrdev_open+0xbd/0x230
[ 0.784444] ? cdev_device_add+0x80/0x80
[ 0.784920] do_dentry_open+0x1e0/0x410
[ 0.785389] path_openat+0xca9/0x1050
[ 0.785813] do_filp_open+0xaa/0x150
[ 0.786240] file_open_name+0x133/0x1b0
[ 0.786746] filp_open+0x27/0x50
[ 0.787244] console_on_rootfs+0x14/0x4d
[ 0.787800] kernel_init_freeable+0x1e4/0x20d
[ 0.788383] ? rest_init+0xc0/0xc0
[ 0.788881] kernel_init+0x11/0x120
[ 0.789356] ret_from_fork+0x22/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: always release netdev hooks from notifier
This reverts "netfilter: nf_tables: skip netdev events generated on netns removal".
The problem is that when a veth device is released, the veth release
callback will also queue the peer netns device for removal.
Its possible that the peer netns is also slated for removal. In this
case, the device memory is already released before the pre_exit hook of
the peer netns runs:
BUG: KASAN: slab-use-after-free in nf_hook_entry_head+0x1b8/0x1d0
Read of size 8 at addr ffff88812c0124f0 by task kworker/u8:1/45
Workqueue: netns cleanup_net
Call Trace:
nf_hook_entry_head+0x1b8/0x1d0
__nf_unregister_net_hook+0x76/0x510
nft_netdev_unregister_hooks+0xa0/0x220
__nft_release_hook+0x184/0x490
nf_tables_pre_exit_net+0x12f/0x1b0
..
Order is:
1. First netns is released, veth_dellink() queues peer netns device
for removal
2. peer netns is queued for removal
3. peer netns device is released, unreg event is triggered
4. unreg event is ignored because netns is going down
5. pre_exit hook calls nft_netdev_unregister_hooks but device memory
might be free'd already. |
| ETERNUS SF provided by Fsas Technologies Inc. contains an incorrect default permissions vulnerability. A low-privileged user with access to the management server may obtain database credentials, potentially allowing execution of OS commands with administrator privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix refcount leak in nfsd_set_fh_dentry()
nfsd exports a "pseudo root filesystem" which is used by NFSv4 to find
the various exported filesystems using LOOKUP requests from a known root
filehandle. NFSv3 uses the MOUNT protocol to find those exported
filesystems and so is not given access to the pseudo root filesystem.
If a v3 (or v2) client uses a filehandle from that filesystem,
nfsd_set_fh_dentry() will report an error, but still stores the export
in "struct svc_fh" even though it also drops the reference (exp_put()).
This means that when fh_put() is called an extra reference will be dropped
which can lead to use-after-free and possible denial of service.
Normal NFS usage will not provide a pseudo-root filehandle to a v3
client. This bug can only be triggered by the client synthesising an
incorrect filehandle.
To fix this we move the assignments to the svc_fh later, after all
possible error cases have been detected. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sunplus: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value,
1. the memory allocated in mmc_alloc_host() will be leaked
2. null-ptr-deref will happen when calling mmc_remove_host()
in remove function spmmc_drv_remove() because deleting not
added device.
Fix this by checking the return value of mmc_add_host(). Moreover,
I fixed the error handling path of spmmc_drv_probe() to clean up. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: sisusbvga: Add endpoint checks
The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver:
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95
RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003
R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600
FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline]
sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379
sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline]
sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline]
sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177
sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869
...
The problem was caused by the fact that the driver does not check
whether the endpoints it uses are actually present and have the
appropriate types. This can be fixed by adding a simple check of
the endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "IB/isert: Fix incorrect release of isert connection"
Commit: 699826f4e30a ("IB/isert: Fix incorrect release of isert connection") is
causing problems on OPA when DEVICE_REMOVAL is happening.
------------[ cut here ]------------
WARNING: CPU: 52 PID: 2117247 at drivers/infiniband/core/cq.c:359
ib_cq_pool_cleanup+0xac/0xb0 [ib_core]
Modules linked in: nfsd nfs_acl target_core_user uio tcm_fc libfc
scsi_transport_fc tcm_loop target_core_pscsi target_core_iblock target_core_file
rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs
rfkill rpcrdma rdma_ucm ib_srpt sunrpc ib_isert iscsi_target_mod target_core_mod
opa_vnic ib_iser libiscsi ib_umad scsi_transport_iscsi rdma_cm ib_ipoib iw_cm
ib_cm hfi1(-) rdmavt ib_uverbs intel_rapl_msr intel_rapl_common sb_edac ib_core
x86_pkg_temp_thermal intel_powerclamp coretemp i2c_i801 mxm_wmi rapl iTCO_wdt
ipmi_si iTCO_vendor_support mei_me ipmi_devintf mei intel_cstate ioatdma
intel_uncore i2c_smbus joydev pcspkr lpc_ich ipmi_msghandler acpi_power_meter
acpi_pad xfs libcrc32c sr_mod sd_mod cdrom t10_pi sg crct10dif_pclmul
crc32_pclmul crc32c_intel drm_kms_helper drm_shmem_helper ahci libahci
ghash_clmulni_intel igb drm libata dca i2c_algo_bit wmi fuse
CPU: 52 PID: 2117247 Comm: modprobe Not tainted 6.5.0-rc1+ #1
Hardware name: Intel Corporation S2600CWR/S2600CW, BIOS
SE5C610.86B.01.01.0014.121820151719 12/18/2015
RIP: 0010:ib_cq_pool_cleanup+0xac/0xb0 [ib_core]
Code: ff 48 8b 43 40 48 8d 7b 40 48 83 e8 40 4c 39 e7 75 b3 49 83
c4 10 4d 39 fc 75 94 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc <0f> 0b eb a1
90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f
RSP: 0018:ffffc10bea13fc80 EFLAGS: 00010206
RAX: 000000000000010c RBX: ffff9bf5c7e66c00 RCX: 000000008020001d
RDX: 000000008020001e RSI: fffff175221f9900 RDI: ffff9bf5c7e67640
RBP: ffff9bf5c7e67600 R08: ffff9bf5c7e64400 R09: 000000008020001d
R10: 0000000040000000 R11: 0000000000000000 R12: ffff9bee4b1e8a18
R13: dead000000000122 R14: dead000000000100 R15: ffff9bee4b1e8a38
FS: 00007ff1e6d38740(0000) GS:ffff9bfd9fb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005652044ecc68 CR3: 0000000889b5c005 CR4: 00000000001706e0
Call Trace:
<TASK>
? __warn+0x80/0x130
? ib_cq_pool_cleanup+0xac/0xb0 [ib_core]
? report_bug+0x195/0x1a0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? ib_cq_pool_cleanup+0xac/0xb0 [ib_core]
disable_device+0x9d/0x160 [ib_core]
__ib_unregister_device+0x42/0xb0 [ib_core]
ib_unregister_device+0x22/0x30 [ib_core]
rvt_unregister_device+0x20/0x90 [rdmavt]
hfi1_unregister_ib_device+0x16/0xf0 [hfi1]
remove_one+0x55/0x1a0 [hfi1]
pci_device_remove+0x36/0xa0
device_release_driver_internal+0x193/0x200
driver_detach+0x44/0x90
bus_remove_driver+0x69/0xf0
pci_unregister_driver+0x2a/0xb0
hfi1_mod_cleanup+0xc/0x3c [hfi1]
__do_sys_delete_module.constprop.0+0x17a/0x2f0
? exit_to_user_mode_prepare+0xc4/0xd0
? syscall_trace_enter.constprop.0+0x126/0x1a0
do_syscall_64+0x5c/0x90
? syscall_exit_to_user_mode+0x12/0x30
? do_syscall_64+0x69/0x90
? syscall_exit_work+0x103/0x130
? syscall_exit_to_user_mode+0x12/0x30
? do_syscall_64+0x69/0x90
? exc_page_fault+0x65/0x150
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7ff1e643f5ab
Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3
66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0
ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007ffec9103cc8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 00005615267fdc50 RCX: 00007ff1e643f5ab
RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005615267fdcb8
RBP: 00005615267fdc50 R08: 0000000000000000 R09: 0000000000000000
R10: 00007ff1e659eac0 R11: 0000000000000206 R12: 00005615267fdcb8
R13: 00000000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe
In function probe(), it returns directly without unregistered hws
when error occurs.
Fix this by adding 'goto unregister_hws;' on line 295 and
line 310.
Use devm_kzalloc() instead of kzalloc() to automatically
free the memory using devm_kfree() when error occurs.
Replace of_iomap() with devm_of_iomap() to automatically
handle the unused ioremap region and delete 'iounmap(anatop_base);'
in unregister_hws. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix invalid buffer access for legacy rq
The below crash can be encountered when using xdpsock in rx mode for
legacy rq: the buffer gets released in the XDP_REDIRECT path, and then
once again in the driver. This fix sets the flag to avoid releasing on
the driver side.
XSK handling of buffers for legacy rq was relying on the caller to set
the skip release flag. But the referenced fix started using fragment
counts for pages instead of the skip flag.
Crash log:
general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP
CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28
Code: ...
RSP: 0018:ffff88810082fc98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc
RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901
RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006
R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000
R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00
FS: 0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? die_addr+0x32/0x80
? exc_general_protection+0x192/0x390
? asm_exc_general_protection+0x22/0x30
? 0xffffffffa000b514
? bpf_prog_03b13f331978c78c+0xf/0x28
mlx5e_xdp_handle+0x48/0x670 [mlx5_core]
? dev_gro_receive+0x3b5/0x6e0
mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core]
mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core]
mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core]
mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core]
__napi_poll+0x25/0x1a0
net_rx_action+0x28a/0x300
__do_softirq+0xcd/0x279
? sort_range+0x20/0x20
run_ksoftirqd+0x1a/0x20
smpboot_thread_fn+0xa2/0x130
kthread+0xc9/0xf0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core]
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: Only force 030 bus error if PC not in exception table
__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.
Our 030 bus error handler is ill equipped to deal with this:
Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.
In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.
Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.
I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.
Tested on 030 Atari Falcon. |
| In the Linux kernel, the following vulnerability has been resolved:
mlx5: fix skb leak while fifo resync and push
During ptp resync operation SKBs were poped from the fifo but were never
freed neither by napi_consume nor by dev_kfree_skb_any. Add call to
napi_consume_skb to properly free SKBs.
Another leak was happening because mlx5e_skb_fifo_has_room() had an error
in the check. Comparing free running counters works well unless C promotes
the types to something wider than the counter. In this case counters are
u16 but the result of the substraction is promouted to int and it causes
wrong result (negative value) of the check when producer have already
overlapped but consumer haven't yet. Explicit cast to u16 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_hwlro_get_fdir_all()
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Enforce expected_attach_type for tailcall compatibility
Yinhao et al. recently reported:
Our fuzzer tool discovered an uninitialized pointer issue in the
bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
This leads to a NULL pointer dereference when a BPF program attempts to
deference the txq member of struct xdp_buff object.
The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.
The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.
In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().
Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
most: usb: Fix use-after-free in hdm_disconnect
hdm_disconnect() calls most_deregister_interface(), which eventually
unregisters the MOST interface device with device_unregister(iface->dev).
If that drops the last reference, the device core may call release_mdev()
immediately while hdm_disconnect() is still executing.
The old code also freed several mdev-owned allocations in
hdm_disconnect() and then performed additional put_device() calls.
Depending on refcount order, this could lead to use-after-free or
double-free when release_mdev() ran (or when unregister paths also
performed puts).
Fix by moving the frees of mdev-owned allocations into release_mdev(),
so they happen exactly once when the device is truly released, and by
dropping the extra put_device() calls in hdm_disconnect() that are
redundant after device_unregister() and most_deregister_interface().
This addresses the KASAN slab-use-after-free reported by syzbot in
hdm_disconnect(). See report and stack traces in the bug link below. |
