| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Information disclosure, Information tampering, and Protection mechanism bypass. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains a Missing Authentication for Critical Function vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, Versions prior to 5.36, contains a Weak Encoding for Password vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information disclosure, Information tampering, Protection mechanism bypass, and Unauthorized access. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Inclusion of Sensitive Information in Source Code vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information exposure. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, when pattern-based ACL rules are configured, AuthorizationsCollector.canDoOperation substitutes client ID and username values directly into rules containing %c or %u and then treats the result as an MQTT topic filter. A client that uses + or # in either identity can broaden the substituted filter and gain cross-tenant read and write access. A # identity can also produce an invalid filter that triggers a NullPointerException in Topic.match and disrupts session processing. This issue is fixed in version 0.18.1. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, SessionEventLoop.run catches only InterruptedException, and SessionEventLoopGroup does not restart a terminated loop. An MQTT command that raises an uncaught exception can terminate an event loop shared by multiple client sessions, preventing every co-located client from processing PUBLISH, SUBSCRIBE, PUBACK, and other commands. An attacker can select client IDs that map across the available loops to disrupt session processing for the entire broker. This issue is fixed in version 0.18.1. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, PostOffice.subscribe parses a shared-subscription filter through SharedSubscriptionUtils.extractShareName before validating the complete $share/{shareName}/{topicFilter} structure. A remote client can send a filter such as $share/grp without a topic-filter portion, causing a StringIndexOutOfBoundsException while calculating the share name. The exception terminates command handling on the shared session event loop and can deny service to other client sessions assigned to that loop. This issue is fixed in version 0.18.1. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, the broker does not enforce a maximum length for pending per-session message queues. When a fast publisher sends messages to a slow subscriber whose in-flight window is full, queued messages can accumulate without bound in memory or persistent storage. Remote clients can use this condition to exhaust broker resources and cause a denial of service. This issue is fixed in version 0.18.1. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, PostOffice.publishWill publishes a client's Last-Will message without applying the canWrite authorization and reserved-topic checks used for a normal PUBLISH. A client can configure a Will for a topic that the client is not permitted to write and cause the broker to publish the unauthorized message when the client disconnects unexpectedly. This issue allows unauthorized message injection into restricted topics. This issue is fixed in version 0.18.1. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error cases where tgtdev is still NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
sas_port_alloc_num() can return NULL on memory allocation failure. The
return value is passed directly to sas_port_add() without a NULL check,
which causes a NULL pointer dereference.
Additionally, if sas_port_add() fails, the allocated port is not freed
before jumping to out_fail, leaking the sas_port structure. Call
sas_port_free() to properly release it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: check_cond_jmp_op(): properly infer if register is null
Nicholas Carlini reported a bug when verifier can incorrectly infer
that a pointer is non-null. The bug occurs when two pointers are
compared and one of them has a type w/o PTR_MAYBE_NULL flag,
but which allows a value to be NULL at runtime.
Here is an example:
// `a` is PTR_TO_MEM | MEM_RDONLY | PTR_UNTRUSTED
// `a` is 0 at runtime.
// `b` is PTR_TO_MAP_VALUE | PTR_MAYBE_NULL
void *a = bpf_rdonly_cast(0, 0);
int *b = bpf_map_lookup_elem(...);
if (a == b)
*b = 42; // verifier does not catch null pointer dereference
This happens because of a special case in check_cond_jmp_op(),
which attempts to strip PTR_MAYBE_NULL flags from pointer types,
when processing comparisons like `rA == rB`, if either rA or rB can't
be null.
The non-null property is derived based on the absence of
PTR_MAYBE_NULL flag on rA's or rB's type. But that is not sufficient
for types like PTR_TO_MEM, as in the example.
This patch replaces type_may_be_null() call with reg_not_null(),
which contains an allowlist of types for which absence of
PTR_MAYBE_NULL actually means that the value can't be NULL at runtime.
At the moment, the list in the reg_not_null() omits two types for
which PTR_MAYBE_NULL is applicable: PTR_TO_XDP_SOCK and PTR_TO_BUF.
In order to remain backward compatible, and assuming that only
comparison between pointers of the same type makes sense,
this commit extends reg_not_null(). W/o such an extension e.g.
verifier_jeq_infer_not_null/null_ptr_to_map_value fails.
reg_not_null() can be extended further, but I deem that out of scope
for the fix at hand. Explicit base_type(...) != PTR_TO_BTF_ID
checks in the check_cond_jmp_op() can be removed with migration to
reg_not_null(), but that is a behavioural change, as the special case
would start matching for PTR_TO_BTF_ID that is also is_trusted_reg().
I omit the behavioural change from this commit. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound $AttrDef table walk to the loaded table size
ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the
loop condition bounds only the start of each entry, not the whole entry:
for (ad = vol->attrdef; (u8 *)ad - (u8 *)vol->attrdef <
vol->attrdef_size && ad->type; ++ad)
struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and
the loop body reads further fields. vol->attrdef is kvzalloc(i_size),
where i_size is the on-disk $AttrDef data size, checked in
load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose
$AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the
read of ad->type run past the allocation. Creating a file reaches this
through ntfs_attr_size_bounds_check() and reads out of bounds:
BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0
Read of size 4 at addr ffff888005833280 by task init/1
ntfs_attr_find_in_attrdef
ntfs_attr_size_bounds_check
ntfs_attr_can_be_non_resident
ntfs_attr_add
Require the whole entry to lie within attrdef_size in the loop guard, and
reject at mount a $AttrDef too small to hold one attr_def entry. |
| Out-of-bounds Write in the natural width branch of the text sizing protocol in kitty from 0.40.0 before 0.49.0 allows a program writing to the terminal to write past the end of a fixed-size buffer, because screen_handle_multicell_command() in kitty/screen.c appends each codepoint of a grapheme cluster with lc.chars[lc.count++] = ch without any capacity check, while lc is declared by the RAII_ListOfChars macro as a four-element char_type array in the function's stack frame, so an OSC 66 escape code whose payload carries a grapheme cluster longer than four codepoints writes beyond that buffer, one 32-bit value per additional codepoint, in the order the codepoints appear. Where the cluster is preceded in the same payload by a sequence that causes an intermediate flush, the buffer is first migrated to the heap by ensure_space_for_chars() and the write occurs past the heap allocation instead. This results in termination of the kitty process and therefore of all its windows, tabs and child processes. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in dashbitco lazy_html allows mutation XSS via a parse and serialize round-trip of attacker-supplied HTML.
LazyHTML.to_html/2 and LazyHTML.Tree.to_html/2 decide whether to escape an element's text from its tag name alone. A style or script element inside SVG or MathML foreign content is parsed with character references decoded, but is serialized as an HTML raw-text element, so its text is emitted unescaped. Encoded markup such as </style><img src=x onerror=...> inside <svg><style> therefore closes the element on re-parse and becomes live markup. Applications that parse untrusted HTML with lazy_html, filter the document or tree, and serialize it for display are affected, since the payload is a plain text node that no element or attribute filter sees.
This issue affects lazy_html: from 0.1.0 before 0.1.13. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Enhance OEM ID and Table ID validation in acpi_ex_load_table_op()
Enhance OEM ID and Table ID validation in acpi_ex_load_table_op() to
prevent buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix NULL pointer dereference in acpi_ns_custom_package()
acpi_ns_custom_package() unconditionally dereferences the first element
of the package to read the _BIX version number, without checking for
NULL:
if ((*Elements)->Common.Type != ACPI_TYPE_INTEGER)
When firmware returns a _BIX package whose first element is an
unresolvable reference, ACPICA evaluates that entry to NULL.
acpi_ns_remove_null_elements() does not strip NULL entries for
ACPI_PTYPE_CUSTOM packages (fixed-position format would break if
elements were shifted), so acpi_ns_custom_package() sees the NULL
and causes a crash.
Add a NULL check for the first element (version field) before
dereferencing it. The caller then receives AE_AML_OPERAND_TYPE
instead of crashing. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: preserve non-DOS attribute bits in system.dos_attrib
[BUG]
A corrupted ntfs3 image can hit a NULL function pointer call in
generic_perform_write() after toggling system.ntfs_attrib and then
overwriting system.dos_attrib on the same file.
BUG: kernel NULL pointer dereference, address: 0000000000000000
\#PF: supervisor instruction fetch in kernel mode
\#PF: error_code(0x0010) - not-present page
PGD bed5067 P4D bed5067 PUD 0
Oops: Oops: 0010 [#1] SMP KASAN NOPTI
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffff88801025f988 EFLAGS: 00010246
Call Trace:
generic_perform_write+0x409/0x8c0 mm/filemap.c:4255
__generic_file_write_iter+0x1bb/0x200 mm/filemap.c:4372
ntfs_file_write_iter+0xcd9/0x1c20 fs/ntfs3/file.c:1253
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x63b/0xf70 fs/read_write.c:686
ksys_write+0x133/0x250 fs/read_write.c:738
__do_sys_write fs/read_write.c:749 [inline]
__se_sys_write fs/read_write.c:746 [inline]
__x64_sys_write+0x77/0xc0 fs/read_write.c:746
...
[CAUSE]
system.ntfs_attrib updates ATTR_DATA flags via ni_new_attr_flags()
and switches i_mapping->a_ops to ntfs_aops_cmpr when
FILE_ATTRIBUTE_COMPRESSED is set. system.dos_attrib then overwrites
ni->std_fa from a one-byte DOS attribute value, clearing the compression
bit without updating ATTR_DATA or the mapping operations.
Old buffered writes use is_compressed(ni) to choose
__generic_file_write_iter(). That leaves generic_perform_write() calling
a NULL write_begin callback from ntfs_aops_cmpr.
[FIX]
Treat system.dos_attrib as a low-byte DOS attribute update and preserve the
existing non-DOS attribute bits in ni->std_fa. This keeps compressed and
sparse state consistent with ATTR_DATA and the mapping operations while
keeping the existing DOS attribute semantics intact. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix handling of NAPI on the remove path
All the NAPI instances for a DPSW device are attached to the first
switch port's net_device but shared by all ports. The NAPI instances get
disabled only once the last port goes down.
This causes an issue on the .remove() path where each port is
unregistered and freed one at a time, causing the NAPI instances to be
deleted even though they are not disabled.
In order to avoid this, split up the unregister_netdev() calls from the
free_netdev() so that we make sure all ports go down before we attempt
a deletion of NAPI instances. Also, make the netif_napi_del() explicit
as it is on the .probe() path. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In 5.5.5, 6.0.1, and 6.1, the BlueDroid A2DP sink function btc_a2dp_sink_handle_inc_media() reads a timestamp field from the received media buffer before validating that the packet layout contains the field. A paired BR/EDR audio source within radio range can send a malformed A2DP media packet to a build with BlueDroid Classic Bluetooth and A2DP sink support enabled, causing an out-of-bounds read into adjacent heap memory and limited disclosure of heap contents. Arbitrary memory disclosure and code execution are not established. |
