| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: fix memory corruption in ioctl
If "s_mem.bytes" is larger than the buffer size it leads to memory
corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_hid: fix f_hidg lifetime vs cdev
The embedded struct cdev does not have its lifetime correctly tied to
the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN
is held open while the gadget is deleted.
This can readily be replicated with libusbgx's example programs (for
conciseness - operating directly via configfs is equivalent):
gadget-hid
exec 3<> /dev/hidg0
gadget-vid-pid-remove
exec 3<&-
Pull the existing device up in to struct f_hidg and make use of the
cdev_device_{add,del}() helpers. This changes the lifetime of the
device object to match struct f_hidg, but note that it is still added
and deleted at the same time. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: Fix device name leak when register device failed in add_mtd_device()
There is a kmemleak when register device failed:
unreferenced object 0xffff888101aab550 (size 8):
comm "insmod", pid 3922, jiffies 4295277753 (age 925.408s)
hex dump (first 8 bytes):
6d 74 64 30 00 88 ff ff mtd0....
backtrace:
[<00000000bde26724>] __kmalloc_node_track_caller+0x4e/0x150
[<000000003c32b416>] kvasprintf+0xb0/0x130
[<000000001f7a8f15>] kobject_set_name_vargs+0x2f/0xb0
[<000000006e781163>] dev_set_name+0xab/0xe0
[<00000000e30d0c78>] add_mtd_device+0x4bb/0x700
[<00000000f3d34de7>] mtd_device_parse_register+0x2ac/0x3f0
[<00000000c0d88488>] 0xffffffffa0238457
[<00000000b40d0922>] 0xffffffffa02a008f
[<0000000023d17b9d>] do_one_initcall+0x87/0x2a0
[<00000000770f6ca6>] do_init_module+0xdf/0x320
[<000000007b6768fe>] load_module+0x2f98/0x3330
[<00000000346bed5a>] __do_sys_finit_module+0x113/0x1b0
[<00000000674c2290>] do_syscall_64+0x35/0x80
[<000000004c6a8d97>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
If register device failed, should call put_device() to give up the
reference. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: plfxlc: fix potential memory leak in __lf_x_usb_enable_rx()
urbs does not be freed in exception paths in __lf_x_usb_enable_rx().
That will trigger memory leak. To fix it, add kfree() for urbs within
"error" label. Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
dm thin: Fix UAF in run_timer_softirq()
When dm_resume() and dm_destroy() are concurrent, it will
lead to UAF, as follows:
BUG: KASAN: use-after-free in __run_timers+0x173/0x710
Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0
<snip>
Call Trace:
<IRQ>
dump_stack_lvl+0x73/0x9f
print_report.cold+0x132/0xaa2
_raw_spin_lock_irqsave+0xcd/0x160
__run_timers+0x173/0x710
kasan_report+0xad/0x110
__run_timers+0x173/0x710
__asan_store8+0x9c/0x140
__run_timers+0x173/0x710
call_timer_fn+0x310/0x310
pvclock_clocksource_read+0xfa/0x250
kvm_clock_read+0x2c/0x70
kvm_clock_get_cycles+0xd/0x20
ktime_get+0x5c/0x110
lapic_next_event+0x38/0x50
clockevents_program_event+0xf1/0x1e0
run_timer_softirq+0x49/0x90
__do_softirq+0x16e/0x62c
__irq_exit_rcu+0x1fa/0x270
irq_exit_rcu+0x12/0x20
sysvec_apic_timer_interrupt+0x8e/0xc0
One of the concurrency UAF can be shown as below:
use free
do_resume |
__find_device_hash_cell |
dm_get |
atomic_inc(&md->holders) |
| dm_destroy
| __dm_destroy
| if (!dm_suspended_md(md))
| atomic_read(&md->holders)
| msleep(1)
dm_resume |
__dm_resume |
dm_table_resume_targets |
pool_resume |
do_waker #add delay work |
dm_put |
atomic_dec(&md->holders) |
| dm_table_destroy
| pool_dtr
| __pool_dec
| __pool_destroy
| destroy_workqueue
| kfree(pool) # free pool
time out
__do_softirq
run_timer_softirq # pool has already been freed
This can be easily reproduced using:
1. create thin-pool
2. dmsetup suspend pool
3. dmsetup resume pool
4. dmsetup remove_all # Concurrent with 3
The root cause of this UAF bug is that dm_resume() adds timer after
dm_destroy() skips cancelling the timer because of suspend status.
After timeout, it will call run_timer_softirq(), however pool has
already been freed. The concurrency UAF bug will happen.
Therefore, cancelling timer again in __pool_destroy(). |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: acpi: Call acpi_put_table() to fix memory leak
The start and length of the event log area are obtained from
TPM2 or TCPA table, so we call acpi_get_table() to get the
ACPI information, but the acpi_get_table() should be coupled with
acpi_put_table() to release the ACPI memory, add the acpi_put_table()
properly to fix the memory leak.
While we are at it, remove the redundant empty line at the
end of the tpm_read_log_acpi(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: fix memory leak in iio_device_register_eventset()
When iio_device_register_sysfs_group() returns failed,
iio_device_register_eventset() needs to free attrs array.
Otherwise, kmemleak would scan & report memory leak as below:
unreferenced object 0xffff88810a1cc3c0 (size 32):
comm "100-i2c-vcnl302", pid 728, jiffies 4295052307 (age 156.027s)
backtrace:
__kmalloc+0x46/0x1b0
iio_device_register_eventset at drivers/iio/industrialio-event.c:541
__iio_device_register at drivers/iio/industrialio-core.c:1959
__devm_iio_device_register at drivers/iio/industrialio-core.c:2040 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx: scu: fix memleak on platform_device_add() fails
No error handling is performed when platform_device_add()
fails. Add error processing before return, and modified
the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap-irq: Use the new num_config_regs property in regmap_add_irq_chip_fwnode
Commit faa87ce9196d ("regmap-irq: Introduce config registers for irq
types") added the num_config_regs, then commit 9edd4f5aee84 ("regmap-irq:
Deprecate type registers and virtual registers") suggested to replace
num_type_reg with it. However, regmap_add_irq_chip_fwnode wasn't modified
to use the new property. Later on, commit 255a03bb1bb3 ("ASoC: wcd9335:
Convert irq chip to config regs") removed the old num_type_reg property
from the WCD9335 driver's struct regmap_irq_chip, causing a null pointer
dereference in regmap_irq_set_type when it tried to index d->type_buf as
it was never allocated in regmap_add_irq_chip_fwnode:
[ 39.199374] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 39.200006] Call trace:
[ 39.200014] regmap_irq_set_type+0x84/0x1c0
[ 39.200026] __irq_set_trigger+0x60/0x1c0
[ 39.200040] __setup_irq+0x2f4/0x78c
[ 39.200051] request_threaded_irq+0xe8/0x1a0
Use num_config_regs in regmap_add_irq_chip_fwnode instead of num_type_reg,
and fall back to it if num_config_regs isn't defined to maintain backward
compatibility. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
The thunderbay_add_functions() will free memory of thunderbay_funcs
when everything is ok, but thunderbay_funcs will not be freed when
thunderbay_add_functions() fails, then there will be a memory leak,
so we need to add kfree() when thunderbay_add_functions() fails to
fix it.
In addition, doing some cleaner works, moving kfree(funcs) from
thunderbay_add_functions() to thunderbay_build_functions(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix potential null-ptr-deref due to drmm_mode_config_init()
drmm_mode_config_init() will call drm_mode_create_standard_properties()
and won't check the ret value. When drm_mode_create_standard_properties()
failed due to alloc, property will be a NULL pointer and may causes the
null-ptr-deref. Fix the null-ptr-deref by adding the ret value check.
Found null-ptr-deref while testing insert module bochs:
general protection fault, probably for non-canonical address
0xdffffc000000000c: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 3 PID: 249 Comm: modprobe Not tainted 6.1.0-rc1+ #364
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:drm_object_attach_property+0x73/0x3c0 [drm]
Call Trace:
<TASK>
__drm_connector_init+0xb6c/0x1100 [drm]
bochs_pci_probe.cold.11+0x4cb/0x7fe [bochs]
pci_device_probe+0x17d/0x340
really_probe+0x1db/0x5d0
__driver_probe_device+0x1e7/0x250
driver_probe_device+0x4a/0x120
__driver_attach+0xcd/0x2c0
bus_for_each_dev+0x11a/0x1b0
bus_add_driver+0x3d7/0x500
driver_register+0x18e/0x320
do_one_initcall+0xc4/0x3e0
do_init_module+0x1b4/0x630
load_module+0x5dca/0x7230
__do_sys_finit_module+0x100/0x170
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff65af9f839 |
| In the Linux kernel, the following vulnerability has been resolved:
media: atomisp: prevent integer overflow in sh_css_set_black_frame()
The "height" and "width" values come from the user so the "height * width"
multiplication can overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe()
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8183_mt6358_ts3a227_max98357_dev_probe(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: hinic: fix the issue of CMDQ memory leaks
When hinic_set_cmdq_depth() fails in hinic_init_cmdqs(), the cmdq memory is
not released correctly. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
md: fix a crash in mempool_free
There's a crash in mempool_free when running the lvm test
shell/lvchange-rebuild-raid.sh.
The reason for the crash is this:
* super_written calls atomic_dec_and_test(&mddev->pending_writes) and
wake_up(&mddev->sb_wait). Then it calls rdev_dec_pending(rdev, mddev)
and bio_put(bio).
* so, the process that waited on sb_wait and that is woken up is racing
with bio_put(bio).
* if the process wins the race, it calls bioset_exit before bio_put(bio)
is executed.
* bio_put(bio) attempts to free a bio into a destroyed bio set - causing
a crash in mempool_free.
We fix this bug by moving bio_put before atomic_dec_and_test.
We also move rdev_dec_pending before atomic_dec_and_test as suggested by
Neil Brown.
The function md_end_flush has a similar bug - we must call bio_put before
we decrement the number of in-progress bios.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 11557f0067 P4D 11557f0067 PUD 0
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 73 Comm: kworker/0:1 Not tainted 6.1.0-rc3 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Workqueue: kdelayd flush_expired_bios [dm_delay]
RIP: 0010:mempool_free+0x47/0x80
Code: 48 89 ef 5b 5d ff e0 f3 c3 48 89 f7 e8 32 45 3f 00 48 63 53 08 48 89 c6 3b 53 04 7d 2d 48 8b 43 10 8d 4a 01 48 89 df 89 4b 08 <48> 89 2c d0 e8 b0 45 3f 00 48 8d 7b 30 5b 5d 31 c9 ba 01 00 00 00
RSP: 0018:ffff88910036bda8 EFLAGS: 00010093
RAX: 0000000000000000 RBX: ffff8891037b65d8 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000202 RDI: ffff8891037b65d8
RBP: ffff8891447ba240 R08: 0000000000012908 R09: 00000000003d0900
R10: 0000000000000000 R11: 0000000000173544 R12: ffff889101a14000
R13: ffff8891562ac300 R14: ffff889102b41440 R15: ffffe8ffffa00d05
FS: 0000000000000000(0000) GS:ffff88942fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000001102e99000 CR4: 00000000000006b0
Call Trace:
<TASK>
clone_endio+0xf4/0x1c0 [dm_mod]
clone_endio+0xf4/0x1c0 [dm_mod]
__submit_bio+0x76/0x120
submit_bio_noacct_nocheck+0xb6/0x2a0
flush_expired_bios+0x28/0x2f [dm_delay]
process_one_work+0x1b4/0x300
worker_thread+0x45/0x3e0
? rescuer_thread+0x380/0x380
kthread+0xc2/0x100
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Modules linked in: brd dm_delay dm_raid dm_mod af_packet uvesafb cfbfillrect cfbimgblt cn cfbcopyarea fb font fbdev tun autofs4 binfmt_misc configfs ipv6 virtio_rng virtio_balloon rng_core virtio_net pcspkr net_failover failover qemu_fw_cfg button mousedev raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid1 raid0 md_mod sd_mod t10_pi crc64_rocksoft crc64 virtio_scsi scsi_mod evdev psmouse bsg scsi_common [last unloaded: brd]
CR2: 0000000000000000
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown
lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can
still occur which in turn tries to access dma apis if lpuart_dma_tx_use
flag is true. At this point since dma is torn down, these dma apis can
abort. Set lpuart_dma_tx_use and the corresponding rx flag
lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not
accessed after they are relinquished.
Otherwise, when try to kill btattach, kernel may panic. This patch may
fix this issue.
root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200
^C[ 90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
[ 90.189806] Modules linked in: moal(O) mlan(O)
[ 90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G O 5.15.32-06136-g34eecdf2f9e4 #37
[ 90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT)
[ 90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 90.215470] pc : fsl_edma3_disable_request+0x8/0x60
[ 90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c
[ 90.225237] sp : ffff800013f0bac0
[ 90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800
[ 90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00
[ 90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000
[ 90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000
[ 90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040
[ 90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090
[ 90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804
[ 90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480
[ 90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800
[ 90.299876] Call trace:
[ 90.302321] fsl_edma3_disable_request+0x8/0x60
[ 90.306851] lpuart_flush_buffer+0x40/0x160
[ 90.311037] uart_flush_buffer+0x88/0x120
[ 90.315050] tty_driver_flush_buffer+0x20/0x30
[ 90.319496] hci_uart_flush+0x44/0x90
[ 90.323162] +0x34/0x12c
[ 90.327253] tty_ldisc_close+0x38/0x70
[ 90.331005] tty_ldisc_release+0xa8/0x190
[ 90.335018] tty_release_struct+0x24/0x8c
[ 90.339022] tty_release+0x3ec/0x4c0
[ 90.342593] __fput+0x70/0x234
[ 90.345652] ____fput+0x14/0x20
[ 90.348790] task_work_run+0x84/0x17c
[ 90.352455] do_exit+0x310/0x96c
[ 90.355688] do_group_exit+0x3c/0xa0
[ 90.359259] __arm64_sys_exit_group+0x1c/0x20
[ 90.363609] invoke_syscall+0x48/0x114
[ 90.367362] el0_svc_common.constprop.0+0xd4/0xfc
[ 90.372068] do_el0_svc+0x2c/0x94
[ 90.375379] el0_svc+0x28/0x80
[ 90.378438] el0t_64_sync_handler+0xa8/0x130
[ 90.382711] el0t_64_sync+0x1a0/0x1a4
[ 90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041)
[ 90.392467] ---[ end trace 2f60524b4a43f1f6 ]---
[ 90.397073] note: btattach[503] exited with preempt_count 1
[ 90.402636] Fixing recursive fault but reboot is needed! |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
Commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'")
will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq()
can free bfqq first, and then call bic_set_bfqq(), which will cause uaf.
Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq(). |
| A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted Online Certificate Status Protocol (OCSP) response during a TLS handshake. Due to a logic error in how gnutls processes multi-record OCSP responses, a client with OCSP verification enabled may incorrectly accept a revoked server certificate, potentially leading to a compromise of trust. |
| In the Linux kernel, the following vulnerability has been resolved:
x86: shadow stacks: proper error handling for mmap lock
김영민 reports that shstk_pop_sigframe() doesn't check for errors from
mmap_read_lock_killable(), which is a silly oversight, and also shows
that we haven't marked those functions with "__must_check", which would
have immediately caught it.
So let's fix both issues. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Wikimedia Foundation Echo.
This vulnerability is associated with program files includes/Api/ApiEchoNotifications.Php.
This issue affects Echo: from * before 1.43.7, 1.44.4, 1.45.2. |
