| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CUPS cups-browsed before 2.5b1 will send an HTTP POST request to an arbitrary destination and port in response to a single IPP UDP packet requesting a printer to be added, a different vulnerability than CVE-2024-47176. (The request is meant to probe the new printer but can be used to create DDoS amplification attacks.) |
| If errors returned from MarshalJSON methods contain user controlled data, they may be used to break the contextual auto-escaping behavior of the html/template package, allowing for subsequent actions to inject unexpected content into templates. |
| Client queries that trigger serving stale data and that also require lookups in local authoritative zone data may result in an assertion failure.
This issue affects BIND 9 versions 9.16.13 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.11.33-S1 through 9.11.37-S1, 9.16.13-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.27-S1. |
| Varnish Cache before 7.3.2 and 7.4.x before 7.4.3 (and before 6.0.13 LTS), and Varnish Enterprise 6 before 6.0.12r6, allows credits exhaustion for an HTTP/2 connection control flow window, aka a Broke Window Attack. |
| Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines()
method would not "pause" writing and signal to the Protocol to drain
the buffer to the wire once the write buffer reached the "high-water
mark". Because of this, Protocols would not periodically drain the write
buffer potentially leading to memory exhaustion.
This
vulnerability likely impacts a small number of users, you must be using
Python 3.12.0 or later, on macOS or Linux, using the asyncio module
with protocols, and using .writelines() method which had new
zero-copy-on-write behavior in Python 3.12.0 and later. If not all of
these factors are true then your usage of Python is unaffected. |
| In some cases, Kea log files or lease files may be world-readable.
This issue affects Kea versions 2.4.0 through 2.4.1, 2.6.0 through 2.6.2, and 2.7.0 through 2.7.8. |
| Resolver caches and authoritative zone databases that hold significant numbers of RRs for the same hostname (of any RTYPE) can suffer from degraded performance as content is being added or updated, and also when handling client queries for this name.
This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.11.4-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.27-S1. |
| Expr is an expression language and expression evaluation for Go. Prior to version 1.17.0, if the Expr expression parser is given an unbounded input string, it will attempt to compile the entire string and generate an Abstract Syntax Tree (AST) node for each part of the expression. In scenarios where input size isn’t limited, a malicious or inadvertent extremely large expression can consume excessive memory as the parser builds a huge AST. This can ultimately lead to*excessive memory usage and an Out-Of-Memory (OOM) crash of the process. This issue is relatively uncommon and will only manifest when there are no restrictions on the input size, i.e. the expression length is allowed to grow arbitrarily large. In typical use cases where inputs are bounded or validated, this problem would not occur. The problem has been patched in the latest versions of the Expr library. The fix introduces compile-time limits on the number of AST nodes and memory usage during parsing, preventing any single expression from exhausting resources. Users should upgrade to Expr version 1.17.0 or later, as this release includes the new node budget and memory limit safeguards. Upgrading to v1.17.0 ensures that extremely deep or large expressions are detected and safely aborted during compilation, avoiding the OOM condition. For users who cannot immediately upgrade, the recommended workaround is to impose an input size restriction before parsing. In practice, this means validating or limiting the length of expression strings that your application will accept. For example, set a maximum allowable number of characters (or nodes) for any expression and reject or truncate inputs that exceed this limit. By ensuring no unbounded-length expression is ever fed into the parser, one can prevent the parser from constructing a pathologically large AST and avoid potential memory exhaustion. In short, pre-validate and cap input size as a safeguard in the absence of the patch. |
| In the Linux kernel through 6.9, an untrusted hypervisor can inject virtual interrupts 0 and 14 at any point in time and can trigger the SIGFPE signal handler in userspace applications. This affects AMD SEV-SNP and AMD SEV-ES. |
| Improper input validation in UEFI firmware for some Intel(R) processors may allow a privileged user to potentially enable escalation of privilege via local access. |
| A heap buffer overflow flaw was found in the DisableDevice function in the X.Org server. This issue may lead to an application crash or, in some circumstances, remote code execution in SSH X11 forwarding environments. |
| Improper input validation in UEFI firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. |
| Insufficient granularity of access control in UEFI firmware in some Intel(R) processors may allow a authenticated user to potentially enable denial of service via local access. |
| Issue summary: Clients using RFC7250 Raw Public Keys (RPKs) to authenticate a
server may fail to notice that the server was not authenticated, because
handshakes don't abort as expected when the SSL_VERIFY_PEER verification mode
is set.
Impact summary: TLS and DTLS connections using raw public keys may be
vulnerable to man-in-middle attacks when server authentication failure is not
detected by clients.
RPKs are disabled by default in both TLS clients and TLS servers. The issue
only arises when TLS clients explicitly enable RPK use by the server, and the
server, likewise, enables sending of an RPK instead of an X.509 certificate
chain. The affected clients are those that then rely on the handshake to
fail when the server's RPK fails to match one of the expected public keys,
by setting the verification mode to SSL_VERIFY_PEER.
Clients that enable server-side raw public keys can still find out that raw
public key verification failed by calling SSL_get_verify_result(), and those
that do, and take appropriate action, are not affected. This issue was
introduced in the initial implementation of RPK support in OpenSSL 3.2.
The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| OpenIPMI before 2.0.36 has an out-of-bounds array access (for authentication type) in the ipmi_sim simulator, resulting in denial of service or (with very low probability) authentication bypass or code execution. |
| If a server hosts a zone containing a "KEY" Resource Record, or a resolver DNSSEC-validates a "KEY" Resource Record from a DNSSEC-signed domain in cache, a client can exhaust resolver CPU resources by sending a stream of SIG(0) signed requests.
This issue affects BIND 9 versions 9.0.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.49-S1, and 9.18.11-S1 through 9.18.27-S1. |
| A flaw was found in NetworkManager. When a system running NetworkManager with DEBUG logs enabled and an interface eth1 configured with LLDP enabled, a malicious user could inject a malformed LLDP packet. NetworkManager would crash, leading to a denial of service. |
| Having a large number of address headers (From, To, Cc, Bcc, etc.) becomes excessively CPU intensive. With 100k header lines CPU usage is already 12 seconds, and in a production environment we observed 500k header lines taking 18 minutes to parse. Since this can be triggered by external actors sending emails to a victim, this is a security issue. An external attacker can send specially crafted messages that consume target system resources and cause outage. One can implement restrictions on address headers on MTA component preceding Dovecot. No publicly available exploits are known. |
| mod_auth_openidc is an OpenID Certified authentication and authorization module for the Apache 2.x HTTP server that implements the OpenID Connect Relying Party functionality. Prior to 2.4.16.11, a bug in a mod_auth_openidc results in disclosure of protected content to unauthenticated users. The conditions for disclosure are an OIDCProviderAuthRequestMethod POST, a valid account, and there mustn't be any application-level gateway (or load balancer etc) protecting the server. When you request a protected resource, the response includes the HTTP status, the HTTP headers, the intended response (the self-submitting form), and the protected resource (with no headers). This is an example of a request for a protected resource, including all the data returned. In the case where mod_auth_openidc returns a form, it has to return OK from check_userid so as not to go down the error path in httpd. This means httpd will try to issue the protected resource. oidc_content_handler is called early, which has the opportunity to prevent the normal output being issued by httpd. oidc_content_handler has a number of checks for when it intervenes, but it doesn't check for this case, so the handler returns DECLINED. Consequently, httpd appends the protected content to the response. The issue has been patched in mod_auth_openidc versions >= 2.4.16.11. |
| Kea configuration and API directives can be used to load a malicious hook library. Many common configurations run Kea as root, leave the API entry points unsecured by default, and/or place the control sockets in insecure paths.
This issue affects Kea versions 2.4.0 through 2.4.1, 2.6.0 through 2.6.2, and 2.7.0 through 2.7.8. |
