Export limit exceeded: 395697 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395697 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90303 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults When CONFIG_DEBUG_USER=y, and cmdline "user_debug=31" is set, a user fault may trigger show_pte() without any lock. If another thread in the same process concurrently calls munmap(), the page table pages may be freed while show_pte() is still traversing them, causing a use-after-free in show_pte(). If CONFIG_ARM_LPAE=y, this may cause a kernel panic if the pages table of PMD are freed when show_pte() is running. Acquire mmap_write_lock() around show_pte() for user faults to fix the contention. For user faults, additionally restrict that show_pte() is called only when the addr is a user-space address (addr < TASK_SIZE). This is because the lock of tsk->mm only protects the virtual memory of user address space, furthermore, dumping the page tables of a kernel-space address for user faults is unnecessary and may have security implications. Keep everything unchanged for kernel faults, because the kernel is already in the "oops" state, acquiring a lock may risk a deadlock. | ||||
| CVE-2026-90267 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails sd_set_special_bvec() allocates a special payload page for UNMAP and WRITE SAME commands. If scsi_alloc_sgtables() fails afterward in sd_setup_unmap_cmnd() or sd_setup_write_same{10,16}_cmnd(), the SCSI midlayer does not call uninit_command() because RQF_DONTPREP is not set yet, leaking the page. Call sd_uninit_command() on error, and clear RQF_SPECIAL_PAYLOAD after freeing the page. | ||||
| CVE-2026-90264 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: always wait for ordered extents to avoid OE races [BUG] Syzbot reported a bug that there can be conflicting OEs for the same range: BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object alrea[ 179.162726][ T6897] BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object already exists) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ordered-data.c:264! Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 RIP: 0010:btrfs_alloc_ordered_extent+0x943/0xad0 Call Trace: <TASK> cow_file_range+0x744/0x12a0 fallback_to_cow+0x5ea/0xa00 run_delalloc_nocow+0x110c/0x17a0 btrfs_run_delalloc_range+0xbe4/0x1c20 writepage_delalloc+0x104d/0x1ba0 btrfs_writepages+0x1667/0x28b0 do_writepages+0x338/0x560 filemap_fdatawrite_range+0x1f2/0x300 btrfs_fdatawrite_range+0x54/0xf0 btrfs_direct_write+0x6a0/0xc30 btrfs_do_write_iter+0x329/0x790 do_iter_readv_writev+0x624/0x8d0 vfs_writev+0x34c/0x990 __se_sys_pwritev2+0x17a/0x2a0 do_syscall_64+0x174/0x580 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ---[ end trace 0000000000000000 ]--- [CAUSE] Since commit ff66fe666233 ("btrfs: fix incorrect buffered IO fallback for append direct writes"), if the direct IO finished short, we will revert the isize back to the original one, so that append writes can be respected during the buffered fallback. Normally we rely on lock_and_cleanup_extent_if_need() function during buffered writeback to wait for any existing ordered extents. But that ordered extent waiting only happens if the start_pos is inside the isize. Since we have reverted the isize during failed direct IO, we will not wait for any ordered extents. This means we can have a race where the direct IO OE is still in the tree, finished but not yet removed, then we're inserting the OE for the buffered write, causing the above crash. [FIX] Make the OE wait to be unconditional, to handle the reverted isize situation. And since lock_and_cleanup_extent_if_need() now either lock the extents or return -EAGAIN, also remove the branches that handles no-extent-locked cases, and rename it to remove the "_if_need" suffix. The following micro benchmark shows the runtime difference for btrfs_buffered_write(), doing `xfs_io -f -c "pwrite 0 1m"` workload, all values are the average runtime in nano seconds. function runtime | before | after -----------------------------------+-------------+--------------- lock_and_cleanup_extent_if_need() | 58.2 | 183.0 btrfs_buffered_write() | 2115.6 | 2973.3 The overall runtime of btrfs_buffered_write() is still pretty tiny (still less than 3 micro seconds), I'd say the extra cost is still acceptable. An alternative to fix this problem is to wait ordered extents during iomap_end() where the isize revert is done. But that solution will break nowait requirement, as if a nowait direct IO finished short, we have to wait for the OEs unconditionally or the next append buffered IO can still hit the same problem. So here we have to move the wait cost to buffered write, but at least the code is slightly more streamline. | ||||
| CVE-2026-90233 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: release descriptor pools on probe failure The per-NUMA-node descriptor DMA pools are created lazily from nvme_init_hctx_common() once the admin tag set is allocated, but they are only destroyed in nvme_remove() via nvme_release_descriptor_pools(). Any probe failure after the admin tag set has been allocated unwinds through the out_disable label and nvme_pci_free_ctrl(), neither of which releases the pools, leaking the dma_pool objects. Release the descriptor pools in the out_disable error path. It must not be added to nvme_pci_free_ctrl(), as that would double-free against nvme_remove() on the normal teardown path. | ||||
| CVE-2026-90222 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: hold a reference to the request skb during send_frame __pn533_send_async() publishes the command and then calls dev->phy_ops->send_frame(). Once dev->cmd is set, an incoming frame can be matched to this command: the I2C threaded IRQ runs pn533_recv_frame(), which queues cmd_complete_work, and pn533_send_async_complete() frees cmd->req with consume_skb(). On the I2C transport, pn533_i2c_send_frame() still dereferences the same skb after i2c_master_send() returns, so a completion that races the send can free the skb while the transport is still using it. The request skb is owned by the command object and may be freed by command completion at any time after dev->cmd is published, so the transport send path must not assume it stays alive. Hold a temporary reference to the request skb across the send_frame() call so the transport always sees a live skb even if completion races the send. Add a pn533_send_cmd_frame() helper and use it from all three send paths. | ||||
| CVE-2026-9314 | 2026-09-17 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-90165 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix invalid pointer dereference in ksmbd_stop_durable_scavenger() See the procedure below: ksmbd_launch_ksmbd_durable_scavenger durable_scavenger_running = true server_conf.dh_task = kthread_run() // fail, dh_task is an ERR_PTR() server_ctrl_handle_reset ksmbd_stop_durable_scavenger kthread_stop(server_conf.dh_task) // invalid pointer | ||||
| CVE-2026-90150 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Fix device leaks on parse failure bl_parse_concat() and bl_parse_stripe() allocate a child device array and then parse each child in turn. If parsing a child fails, the failed child is not counted in nr_children and the parent may be left with a children array that bl_free_device() will not release when nr_children is zero. Release the failed child and the already parsed children before returning the error. Also make bl_free_device() release the child array whenever the children pointer is set, so that partially initialised concat or stripe devices are cleaned up correctly. bl_parse_scsi() can also fail after assigning d->bdev_file and dropping the file reference. Clear the pointer after fput() so that an outer cleanup path does not put it again. | ||||
| CVE-2026-90138 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds the EPROTO error from the earlier failed self-connect. This rejection causes the child socket created for r1's connection to never be freed on virtio or hyperv transports; only the VMCI transport implements pending_work to revisit and clean up a rejected socket. For a non-blocking connect(), vsock_connect() may return -EINPROGRESS immediately, and vsock_connect_timeout() can later set sk->sk_err asynchronously. Since no vsock transport ever sets sk_err on a socket while it is in TCP_LISTEN state, checking it in vsock_accept() serves no purpose and only carries forward errors left behind by earlier, unrelated connection attempts on the same socket. Remove the checks so accept() no longer rejects valid incoming connections because of a stale error, which also avoids the resource leak described above. | ||||
| CVE-2026-90136 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Reject negative power cap writes in hwmon hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a __u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge unsigned value by the division and then stored into the u32 argument. As a result a nonsensical, multi-gigawatt socket power limit is sent to the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being rejected. Reject negative values with -EINVAL before the conversion. Tested with HSMP enabled: CAP=$(dirname $(grep -l amd_hsmp_hwmon \ /sys/class/hwmon/hwmon*/name | head -1))/power1_cap # negative write echo -1000000 > $CAP ; echo "ret=$?" # valid positive write must still work echo 400000000 > $CAP ; echo "ret=$?" Before: # echo -1000000 > $CAP ; echo "ret=$?" ret=0 <- accepted; bogus limit sent to SMU # echo 400000000 > $CAP ; echo "ret=$?" ret=0 After: # echo -1000000 > $CAP ; echo "ret=$?" bash: echo: write error: Invalid argument ret=1 <- rejected with -EINVAL # echo 400000000 > $CAP ; echo "ret=$?" ret=0 <- valid write still works | ||||
| CVE-2026-90135 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/* causes use-afer-free crash when either alloc_percpu() or dev_addr_init() in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure") added ref_tracker_dir_exit() to only free_netdev() path. | ||||
| CVE-2026-90130 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix cleanup after worker creation failure vdpasim_create() leaves vdpasim->worker as an ERR_PTR when kthread_run_worker() fails. The error path then drops the device reference, which releases the partially initialized simulator. vdpasim_free() unconditionally passes the worker pointer to kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger a general protection fault. Store the worker error, clear the pointer, and only clean up the worker when it was successfully initialized. Also make the release path tolerate partially initialized objects by guarding virtqueue and IOTLB cleanup, since the same release path can be reached from other initialization failures. I found this bug myself, though the patch was written with AI assistance. | ||||
| CVE-2026-90129 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio_balloon: quiesce balloon work before device shutdown Commit 8bd2fa086a04 ("virtio: break and reset virtio devices on device_shutdown()") added a generic virtio bus .shutdown handler that breaks and resets every virtio device during device_shutdown(), i.e. on reboot and kexec. virtio_balloon provides no .shutdown of its own, so that generic path runs while the balloon's asynchronous work is still armed. Once the device has been broken, virtqueue_add_inbuf() in virtballoon_free_page_report() returns -EIO and trips its WARN_ON_ONCE(). On a kernel booted with panic_on_warn that turns an ordinary reboot, for example a kexec based upgrade, into a fatal panic in the middle of device_shutdown(), so the machine never reaches the new kernel. Relaxing that single WARN_ON_ONCE() would only hide the symptom: the inflate/deflate and OOM paths do not warn, they call wait_event(vb->acked, ...) and would instead block forever on a broken queue that can no longer complete. The device has to be quiesced, not just kept quiet. Add a .shutdown handler that quiesces the balloon via the shared virtballoon_quiesce() helper while the device is still alive, and only then breaks and resets it via virtio_device_shutdown(). Unlike virtballoon_remove() the balloon workqueue is not destroyed, as shutdown does not free the device and cancel_work_sync() together with stop_update already prevent any further work from being queued. | ||||
| CVE-2026-90116 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms chip->timer while holding chip->spinlock and accesses the card-private mtpav state. snd_mtpav_free() currently takes the same lock and calls timer_delete() when the timer is active. This only removes a pending timer; it does not wait for a callback that is already running and does not prevent the callback from rearming the timer. A callback running on another CPU can therefore continue after snd_mtpav_free() releases the lock and access the card-private state while the card is being torn down. It can also rearm the timer after timer_delete() has returned. Call timer_shutdown_sync() without holding chip->spinlock. This waits for any running callback to finish and prevents further rearming before the card-private mtpav state is released. | ||||
| CVE-2026-90115 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: fix NULL pointer dereference in __xsk_rcv() In the __xsk_rcv() multi-buffer path, xsk_buff_alloc() is called in a loop without checking its return value. xsk_buff_can_alloc() only counts fill queue entries without validating their addresses, so it can succeed while xsk_buff_alloc() rejects all remaining entries and returns NULL. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__xsk_rcv+0x426/0xc20 (net/xdp/xsk.c:350) Call Trace: xsk_generic_rcv+0x26d/0x5f0 xdp_do_generic_redirect+0x3c5/0xcf0 do_xdp_generic+0x92f/0xe70 __netif_receive_skb_core.constprop.0+0xf7e/0x2b30 Fix this with a two-stage transaction. First allocate and stage all buffers required for the packet, recycling all staged buffers with xsk_buff_free() if any allocation fails. Only after this stage succeeds, copy the data, reserve the RX descriptors, and release the buffers in an error-free loop. | ||||
| CVE-2026-90109 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the current backlog plus the packet length fits within the queue limit: sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ) gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ) sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo) sch->qstats.backlog + skb->len <= q->limit (plug) sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len are unsigned int, so all sums are computed in 32 bits and wrap at 2^32. Once the true backlog exceeds 4 GiB the wrapped sum becomes small and admission keeps succeeding, so the queue grows without bound and the kernel can be driven to OOM. Promote the sums to u64 so admission stops once the true backlog exceeds the limit. The limit is u32, so the bounded queue stays below 2^32 and the stored u32 backlog never wraps. The bug can only be reproduced as root (albeit with ridiculous setup): attach a gred (or bfifo/plug) qdisc with a limit near 4 GiB, leaving the default VQ unconfigured (for gred), and drive >4 GiB of queued traffic (e.g. via a size table / stab to inflate qdisc_pkt_len, or sustained high-rate traffic). The u32 backlog+len sum wraps at 2^32, admission keeps succeeding, and the queue grows unboundedly to OOM. | ||||
| CVE-2026-90107 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: free pending qentry in smc_llc_flow_stop() before memset smc_llc_flow_stop() resets a flow struct with a blind memset: spin_lock_bh(&lgr->llc_flow_lock); memset(flow, 0, sizeof(*flow)); flow->type = SMC_LLC_FLOW_NONE; spin_unlock_bh(&lgr->llc_flow_lock); If flow->qentry is non-NULL at this point the pointer is overwritten without the allocation being freed, leaking one kmalloc object. A late-arriving duplicate CONFIRM_LINK or ADD_LINK_CONT message can set flow->qentry after the legitimate message has been consumed by the waiter via smc_llc_flow_qentry_clr() (which NULLs the pointer but leaves flow->type non-zero) but before the flow completes and smc_llc_flow_stop() runs. In that window the duplicate is stashed into flow->qentry, and then lost when smc_llc_flow_stop() zeros the struct. Call smc_llc_flow_qentry_del() inside the lock before the memset. smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the normal case where no entry is pending is a no-op. | ||||
| CVE-2026-90097 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Skip VMBus module cleanup for non-nested root partition The VMBus module initialization function, hv_acpi_init(), currently does nothing when running in the root partition and root is not nested in another VM. But the initialization function reports success, so the VMBus module is indeed loaded. VMBus functionality is not actually needed, but the VMBus module must be loaded so that hv_vmbus_exists() can answer correctly. Furthermore, the mshv_root dependency on the VMBus module is needed as described in the commit message for 840b740a35bf ("mshv: Add conditional VMBus dependency"). Loading the VMBus module without actually initializing it causes failures if the module should later be unloaded. The module unload code tries to clean up things that were never initialized, resulting in memory faults and a panic. Fix this by having VMBus module exit function perform the same check for non-nested root partition, and do nothing in such a case, just like hv_acpi_init(). In the long run, the code that manages the Hyper-V provided SynIC should be refactored to better coordinate the requirements of root partition scenarios and normal VM scenarios, and to hopefully remove the hv_vmbus_exists() dependnecy between mshv_root and VMBus modules. Preventing the current unload failure scenario is an expediency until such a refactoring is done. | ||||
| CVE-2026-90054 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix corruption of urgent data on multi-segment retransmit On the normal xmit path, while in urgent mode we refuse to build a multi-segment TSO packet, so every segment gets its own urg_ptr: /* tcp_write_xmit() */ limit = mss_now; if (tso_segs > 1 && !tcp_urg_mode(tp)) limit = tcp_mss_split_point(...); The retransmit path has no such guard. __tcp_retransmit_skb() builds a segs > 1 skb and hands it to the GSO layer, which only advances th->seq per segment and copies urg_ptr verbatim: /* __tcp_retransmit_skb() */ len = cur_mss * segs; /* segs > 1, no urg_mode check */ ... /* tcp_gso_segment(): bumps seq only, urg_ptr is copied */ urg_ptr is an offset from the segment's own seq, so a copied value points at a different place on each segment. The receiver rebuilds the absolute urgent seq as seg.seq + urg_ptr, so it walks a moving urgent point instead of the one OOB byte: seg1 seq 1 urg_ptr 5001 -> urgent @ 5001 (ok) seg2 seq 1001 urg_ptr 5001 -> urgent @ 6001 (wrong, +MSS) seg3 seq 2001 urg_ptr 5001 -> urgent @ 7001 (wrong, +2*MSS) The real OOB byte is never pointed at, so the receiver stops splicing it out and delivers it as normal in-band data, corrupting the stream. Guard the retransmit length like the xmit path: keep segs = 1 while in urgent mode. | ||||
| CVE-2026-43762 | 1 Apple | 5 Ios And Ipados, Ipados, Iphone Os and 2 more | 2026-09-17 | 5.5 Medium |
| The issue was addressed with improved checks. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, visionOS 26.6. An app may be able to access user-sensitive data. | ||||