| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenClaw before 2026.5.26 contains a hostname validation vulnerability allowing attackers to bypass blocklist comparisons using trailing-dot notation in model or workspace-derived URLs. Attackers can exploit inconsistent hostname checks to reach destinations that operators intended to block through hostname policies. |
| OpenClaw before 2026.5.2 contains a path traversal vulnerability in maintenance task execution that allows workspace-derived service paths to influence trash command selection. Attackers can execute unintended local executables from operator-unintended paths during maintenance operations by manipulating workspace-derived environment paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: remove never-working support for setting nsh fields
The validation of the set(nsh(...)) action is completely wrong.
It runs through the nsh_key_put_from_nlattr() function that is the
same function that validates NSH keys for the flow match and the
push_nsh() action. However, the set(nsh(...)) has a very different
memory layout. Nested attributes in there are doubled in size in
case of the masked set(). That makes proper validation impossible.
There is also confusion in the code between the 'masked' flag, that
says that the nested attributes are doubled in size containing both
the value and the mask, and the 'is_mask' that says that the value
we're parsing is the mask. This is causing kernel crash on trying to
write into mask part of the match with SW_FLOW_KEY_PUT() during
validation, while validate_nsh() doesn't allocate any memory for it:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1c2383067 P4D 1c2383067 PUD 20b703067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 8 UID: 0 Kdump: loaded Not tainted 6.17.0-rc4+ #107 PREEMPT(voluntary)
RIP: 0010:nsh_key_put_from_nlattr+0x19d/0x610 [openvswitch]
Call Trace:
<TASK>
validate_nsh+0x60/0x90 [openvswitch]
validate_set.constprop.0+0x270/0x3c0 [openvswitch]
__ovs_nla_copy_actions+0x477/0x860 [openvswitch]
ovs_nla_copy_actions+0x8d/0x100 [openvswitch]
ovs_packet_cmd_execute+0x1cc/0x310 [openvswitch]
genl_family_rcv_msg_doit+0xdb/0x130
genl_family_rcv_msg+0x14b/0x220
genl_rcv_msg+0x47/0xa0
netlink_rcv_skb+0x53/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x280/0x3b0
netlink_sendmsg+0x1f7/0x430
____sys_sendmsg+0x36b/0x3a0
___sys_sendmsg+0x87/0xd0
__sys_sendmsg+0x6d/0xd0
do_syscall_64+0x7b/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The third issue with this process is that while trying to convert
the non-masked set into masked one, validate_set() copies and doubles
the size of the OVS_KEY_ATTR_NSH as if it didn't have any nested
attributes. It should be copying each nested attribute and doubling
them in size independently. And the process must be properly reversed
during the conversion back from masked to a non-masked variant during
the flow dump.
In the end, the only two outcomes of trying to use this action are
either validation failure or a kernel crash. And if somehow someone
manages to install a flow with such an action, it will most definitely
not do what it is supposed to, since all the keys and the masks are
mixed up.
Fixing all the issues is a complex task as it requires re-writing
most of the validation code.
Given that and the fact that this functionality never worked since
introduction, let's just remove it altogether. It's better to
re-introduce it later with a proper implementation instead of trying
to fix it in stable releases. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_qfq: Fix null-deref in agg_dequeue
To prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c)
when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the return
value before using it, similar to the existing approach in sch_hfsc.c.
To avoid code duplication, the following changes are made:
1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a static
inline function.
2. Moved qdisc_peek_len from net/sched/sch_hfsc.c to
include/net/pkt_sched.h so that sch_qfq can reuse it.
3. Applied qdisc_peek_len in agg_dequeue to avoid crashing. |
| In the Linux kernel, the following vulnerability has been resolved:
smc: Fix use-after-free in __pnet_find_base_ndev().
syzbot reported use-after-free of net_device in __pnet_find_base_ndev(),
which was called during connect(). [0]
smc_pnet_find_ism_resource() fetches sk_dst_get(sk)->dev and passes
down to pnet_find_base_ndev(), where RTNL is held. Then, UAF happened
at __pnet_find_base_ndev() when the dev is first used.
This means dev had already been freed before acquiring RTNL in
pnet_find_base_ndev().
While dev is going away, dst->dev could be swapped with blackhole_netdev,
and the dev's refcnt by dst will be released.
We must hold dev's refcnt before calling smc_pnet_find_ism_resource().
Also, smc_pnet_find_roce_resource() has the same problem.
Let's use __sk_dst_get() and dst_dev_rcu() in the two functions.
[0]:
BUG: KASAN: use-after-free in __pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926
Read of size 1 at addr ffff888036bac33a by task syz.0.3632/18609
CPU: 1 UID: 0 PID: 18609 Comm: syz.0.3632 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
__pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926
pnet_find_base_ndev net/smc/smc_pnet.c:946 [inline]
smc_pnet_find_ism_by_pnetid net/smc/smc_pnet.c:1103 [inline]
smc_pnet_find_ism_resource+0xef/0x390 net/smc/smc_pnet.c:1154
smc_find_ism_device net/smc/af_smc.c:1030 [inline]
smc_find_proposal_devices net/smc/af_smc.c:1115 [inline]
__smc_connect+0x372/0x1890 net/smc/af_smc.c:1545
smc_connect+0x877/0xd90 net/smc/af_smc.c:1715
__sys_connect_file net/socket.c:2086 [inline]
__sys_connect+0x313/0x440 net/socket.c:2105
__do_sys_connect net/socket.c:2111 [inline]
__se_sys_connect net/socket.c:2108 [inline]
__x64_sys_connect+0x7a/0x90 net/socket.c:2108
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f47cbf8eba9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f47ccdb1038 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00007f47cc1d5fa0 RCX: 00007f47cbf8eba9
RDX: 0000000000000010 RSI: 0000200000000280 RDI: 000000000000000b
RBP: 00007f47cc011e19 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f47cc1d6038 R14: 00007f47cc1d5fa0 R15: 00007ffc512f8aa8
</TASK>
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888036bacd00 pfn:0x36bac
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000000 ffffea0001243d08 ffff8880b863fdc0 0000000000000000
raw: ffff888036bacd00 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x446dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOWARN|__GFP_RETRY_MAYFAIL|__GFP_COMP), pid 16741, tgid 16741 (syz-executor), ts 343313197788, free_ts 380670750466
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x240/0x2a0 mm/page_alloc.c:1851
prep_new_page mm/page_alloc.c:1859 [inline]
get_page_from_freelist+0x21e4/0x22c0 mm/page_alloc.c:3858
__alloc_frozen_pages_noprof+0x181/0x370 mm/page_alloc.c:5148
alloc_pages_mpol+0x232/0x4a0 mm/mempolicy.c:2416
___kmalloc_large_node+0x5f/0x1b0 mm/slub.c:4317
__kmalloc_large_node_noprof+0x18/0x90 mm/slub.c:4348
__do_kmalloc_node mm/slub.c:4364 [inline]
__kvmalloc_node
---truncated--- |
| MariaDB server is a community developed fork of MySQL server. From versions 10.6.1 to before 10.6.26, 10.11.1 to before 10.11.17, 11.4.1 to before 11.4.11, 11.8.1 to before 11.8.7, and 12.3.1, mbstream did not check for /../ in the path when unpacking the archive. A proper backup can never contain such paths, but a specially crafted archive could have caused mbstream to create files outside of the target-dir path. This issue has been patched in versions 10.6.26, 10.11.17, 11.4.11, 11.8.7, and 12.3.2. |
| OpenTelemetry-cpp is the C++ implementation of OpenTelemetry. Prior to release 1.27.0, the OTLP HTTP exporters (traces/metrics/logs) read the full HTTP response into an in-memory vector of bytes without a size cap. This is exploitable for memory exhaustion when the configured collector endpoint is attacker-controlled (or a network attacker can MITM the exporter connection). This vulnerability is fixed in opentelemetry-cpp release 1.27.0. |
| Spring Data's internal property-lookup cache accepts and permanently retains attacker-supplied strings as cache keys, allowing heap exhaustion through repeated requests.
Affected versions:
Spring Data Commons 2.7.0 through 2.7.19; 3.3.0 through 3.3.16; 3.4.0 through 3.4.14; 3.5.0 through 3.5.11; 4.0.0 through 4.0.5. |
| MariaDB server is a community developed fork of MySQL server. In versions 3.3.18 and 3.4.8, an application that was taking non-validated user input, escaping it with mysql_real_escape_string() and sending it to the database using text protocol and big5 character set was vulnerable to SQL injections, even though mysql_real_escape_string() was supposed to prevent them. This issue has been patched in versions 3.3.19 and 3.4.9. |
| A vulnerability in SQL Expressions allows an authenticated attacker to read arbitrary files from the Grafana server's filesystem. Only instances with the sqlExpressions feature toggle enabled are vulnerable. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix improper freeing of purex item
In qla2xxx_process_purls_iocb(), an item is allocated via
qla27xx_copy_multiple_pkt(), which internally calls
qla24xx_alloc_purex_item().
The qla24xx_alloc_purex_item() function may return a pre-allocated item
from a per-adapter pool for small allocations, instead of dynamically
allocating memory with kzalloc().
An error handling path in qla2xxx_process_purls_iocb() incorrectly uses
kfree() to release the item. If the item was from the pre-allocated
pool, calling kfree() on it is a bug that can lead to memory corruption.
Fix this by using the correct deallocation function,
qla24xx_free_purex_item(), which properly handles both dynamically
allocated and pre-allocated items. |
| DNG SDK versions 1.7.1 2536 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| DNG SDK versions 1.7.1 2536 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| DNG SDK versions 1.7.1 2536 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| OpenClaw before 2026.4.29 contains a session visibility check bypass vulnerability in shared memory search that allows authenticated callers to access memory entries without proper authorization. Attackers can skip session visibility guards on the search path to retrieve memory entries that should not be visible to their session. |
| OpenClaw before 2026.5.6 contains a hook bypass vulnerability where skill commands routed through the affected dispatch path skip before-tool-call hook coverage. Attackers can exploit this by sending skill commands through the vulnerable dispatch path to bypass hook-based auditing and policy enforcement mechanisms. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: defer config put in recv_work
There is one uaf issue in recv_work when running NBD_CLEAR_SOCK and
NBD_CMD_RECONFIGURE:
nbd_genl_connect // conf_ref=2 (connect and recv_work A)
nbd_open // conf_ref=3
recv_work A done // conf_ref=2
NBD_CLEAR_SOCK // conf_ref=1
nbd_genl_reconfigure // conf_ref=2 (trigger recv_work B)
close nbd // conf_ref=1
recv_work B
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Or only running NBD_CLEAR_SOCK:
nbd_genl_connect // conf_ref=2
nbd_open // conf_ref=3
NBD_CLEAR_SOCK // conf_ref=2
close nbd
nbd_release
config_put // conf_ref=1
recv_work
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Commit 87aac3a80af5 ("nbd: call nbd_config_put() before notifying the
waiter") moved nbd_config_put() to run before waking up the waiter in
recv_work, in order to ensure that nbd_start_device_ioctl() would not
be woken up while nbd->task_recv was still uncleared.
However, in nbd_start_device_ioctl(), after being woken up it explicitly
calls flush_workqueue() to make sure all current works are finished.
Therefore, there is no need to move the config put ahead of the wakeup.
Move nbd_config_put() to the end of recv_work, so that the reference is
held for the whole lifetime of the worker thread. This makes sure the
config cannot be freed while recv_work is still running, even if clear
+ reconfigure interleave.
In addition, we don't need to worry about recv_work dropping the last
nbd_put (which causes deadlock):
path A (netlink with NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=1 (trigger recv_work)
open nbd // nbd_refs=2
NBD_CLEAR_SOCK
close nbd
nbd_release
nbd_disconnect_and_put
flush_workqueue // recv_work done
nbd_config_put
nbd_put // nbd_refs=1
nbd_put // nbd_refs=0
queue_work
path B (netlink without NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=2 (trigger recv_work)
open nbd // nbd_refs=3
NBD_CLEAR_SOCK // conf_refs=2
close nbd
nbd_release
nbd_config_put // conf_refs=1
nbd_put // nbd_refs=2
recv_work done // conf_refs=0, nbd_refs=1
rmmod // nbd_refs=0
Depends-on: e2daec488c57 ("nbd: Fix hungtask when nbd_config_put") |
| When a user's access to mint tokens for a service account is revoked, it is sometimes still possible to do so for a few seconds after the event. The user will eventually lose access to do this. |
| Vulnerability in the Oracle Advanced Outbound Telephony product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Advanced Outbound Telephony. Successful attacks of this vulnerability can result in takeover of Oracle Advanced Outbound Telephony. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Advanced Outbound Telephony product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Advanced Outbound Telephony. Successful attacks of this vulnerability can result in takeover of Oracle Advanced Outbound Telephony. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
