Export limit exceeded: 349262 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (349262 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43461 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: amlogic: spifc-a4: Fix DMA mapping error handling Fix three bugs in aml_sfc_dma_buffer_setup() error paths: 1. Unnecessary goto: When the first DMA mapping (sfc->daddr) fails, nothing needs cleanup. Use direct return instead of goto. 2. Double-unmap bug: When info DMA mapping failed, the code would unmap sfc->daddr inline, then fall through to out_map_data which would unmap it again, causing a double-unmap. 3. Wrong unmap size: The out_map_info label used datalen instead of infolen when unmapping sfc->iaddr, which could lead to incorrect DMA sync behavior. | ||||
| CVE-2026-43462 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: spacemit: Fix error handling in emac_tx_mem_map() The DMA mappings were leaked on mapping error. Free them with the existing emac_free_tx_buf() function. | ||||
| CVE-2026-43475 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT This resolves the follow splat and lock-up when running with PREEMPT_RT enabled on Hyper-V: [ 415.140818] BUG: scheduling while atomic: stress-ng-iomix/1048/0x00000002 [ 415.140822] INFO: lockdep is turned off. [ 415.140823] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec ghash_clmulni_intel aesni_intel rapl binfmt_misc nls_ascii nls_cp437 vfat fat snd_pcm hyperv_drm snd_timer drm_client_lib drm_shmem_helper snd sg soundcore drm_kms_helper pcspkr hv_balloon hv_utils evdev joydev drm configfs efi_pstore nfnetlink vsock_loopback vmw_vsock_virtio_transport_common hv_sock vmw_vsock_vmci_transport vsock vmw_vmci efivarfs autofs4 ext4 crc16 mbcache jbd2 sr_mod sd_mod cdrom hv_storvsc serio_raw hid_generic scsi_transport_fc hid_hyperv scsi_mod hid hv_netvsc hyperv_keyboard scsi_common [ 415.140846] Preemption disabled at: [ 415.140847] [<ffffffffc0656171>] storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc] [ 415.140854] CPU: 8 UID: 0 PID: 1048 Comm: stress-ng-iomix Not tainted 6.19.0-rc7 #30 PREEMPT_{RT,(full)} [ 415.140856] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/04/2024 [ 415.140857] Call Trace: [ 415.140861] <TASK> [ 415.140861] ? storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc] [ 415.140863] dump_stack_lvl+0x91/0xb0 [ 415.140870] __schedule_bug+0x9c/0xc0 [ 415.140875] __schedule+0xdf6/0x1300 [ 415.140877] ? rtlock_slowlock_locked+0x56c/0x1980 [ 415.140879] ? rcu_is_watching+0x12/0x60 [ 415.140883] schedule_rtlock+0x21/0x40 [ 415.140885] rtlock_slowlock_locked+0x502/0x1980 [ 415.140891] rt_spin_lock+0x89/0x1e0 [ 415.140893] hv_ringbuffer_write+0x87/0x2a0 [ 415.140899] vmbus_sendpacket_mpb_desc+0xb6/0xe0 [ 415.140900] ? rcu_is_watching+0x12/0x60 [ 415.140902] storvsc_queuecommand+0x669/0xbe0 [hv_storvsc] [ 415.140904] ? HARDIRQ_verbose+0x10/0x10 [ 415.140908] ? __rq_qos_issue+0x28/0x40 [ 415.140911] scsi_queue_rq+0x760/0xd80 [scsi_mod] [ 415.140926] __blk_mq_issue_directly+0x4a/0xc0 [ 415.140928] blk_mq_issue_direct+0x87/0x2b0 [ 415.140931] blk_mq_dispatch_queue_requests+0x120/0x440 [ 415.140933] blk_mq_flush_plug_list+0x7a/0x1a0 [ 415.140935] __blk_flush_plug+0xf4/0x150 [ 415.140940] __submit_bio+0x2b2/0x5c0 [ 415.140944] ? submit_bio_noacct_nocheck+0x272/0x360 [ 415.140946] submit_bio_noacct_nocheck+0x272/0x360 [ 415.140951] ext4_read_bh_lock+0x3e/0x60 [ext4] [ 415.140995] ext4_block_write_begin+0x396/0x650 [ext4] [ 415.141018] ? __pfx_ext4_da_get_block_prep+0x10/0x10 [ext4] [ 415.141038] ext4_da_write_begin+0x1c4/0x350 [ext4] [ 415.141060] generic_perform_write+0x14e/0x2c0 [ 415.141065] ext4_buffered_write_iter+0x6b/0x120 [ext4] [ 415.141083] vfs_write+0x2ca/0x570 [ 415.141087] ksys_write+0x76/0xf0 [ 415.141089] do_syscall_64+0x99/0x1490 [ 415.141093] ? rcu_is_watching+0x12/0x60 [ 415.141095] ? finish_task_switch.isra.0+0xdf/0x3d0 [ 415.141097] ? rcu_is_watching+0x12/0x60 [ 415.141098] ? lock_release+0x1f0/0x2a0 [ 415.141100] ? rcu_is_watching+0x12/0x60 [ 415.141101] ? finish_task_switch.isra.0+0xe4/0x3d0 [ 415.141103] ? rcu_is_watching+0x12/0x60 [ 415.141104] ? __schedule+0xb34/0x1300 [ 415.141106] ? hrtimer_try_to_cancel+0x1d/0x170 [ 415.141109] ? do_nanosleep+0x8b/0x160 [ 415.141111] ? hrtimer_nanosleep+0x89/0x100 [ 415.141114] ? __pfx_hrtimer_wakeup+0x10/0x10 [ 415.141116] ? xfd_validate_state+0x26/0x90 [ 415.141118] ? rcu_is_watching+0x12/0x60 [ 415.141120] ? do_syscall_64+0x1e0/0x1490 [ 415.141121] ? do_syscall_64+0x1e0/0x1490 [ 415.141123] ? rcu_is_watching+0x12/0x60 [ 415.141124] ? do_syscall_64+0x1e0/0x1490 [ 415.141125] ? do_syscall_64+0x1e0/0x1490 [ 415.141127] ? irqentry_exit+0x140/0 ---truncated--- | ||||
| CVE-2026-8148 | 2026-05-08 | 7.8 High | ||
| NAVER MYBOX Explorer for Windows before 3.0.11.160 allows a local attacker to escalate privileges to NT AUTHORITY\SYSTEM via registry manipulation due to improper privilege checks. | ||||
| CVE-2026-43113 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wl1251: validate packet IDs before indexing tx_frames wl1251_tx_packet_cb() uses the firmware completion ID directly to index the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the completion block, and the callback does not currently verify that it fits the array before dereferencing it. Reject completion IDs that fall outside wl->tx_frames[] and keep the existing NULL check in the same guard. This keeps the fix local to the trust boundary and avoids touching the rest of the completion flow. | ||||
| CVE-2026-43126 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mixer: oss: Add card disconnect checkpoints ALSA OSS mixer layer calls the kcontrol ops rather individually, and pending calls might be not always caught at disconnecting the device. For avoiding the potential UAF scenarios, add sanity checks of the card disconnection at each entry point of OSS mixer accesses. The rwsem is taken just before that check, hence the rest context should be covered by that properly. | ||||
| CVE-2026-43127 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix circular locking dependency in run_unpack_ex Syzbot reported a circular locking dependency between wnd->rw_lock (sbi->used.bitmap) and ni->file.run_lock. The deadlock scenario: 1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock. 2. run_unpack_ex() takes wnd->rw_lock then tries to acquire ni->file.run_lock inside ntfs_refresh_zone(). This creates an AB-BA deadlock. Fix this by using down_read_trylock() instead of down_read() when acquiring run_lock in run_unpack_ex(). If the lock is contended, skip ntfs_refresh_zone() - the MFT zone will be refreshed on the next MFT operation. This breaks the circular dependency since we never block waiting for run_lock while holding wnd->rw_lock. | ||||
| CVE-2026-43114 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry New test case fails unexpectedly when avx2 matching functions are used. The test first loads a ranomly generated pipapo set with 'ipv4 . port' key, i.e. nft -f foo. This works. Then, it reloads the set after a flush: (echo flush set t s; cat foo) | nft -f - This is expected to work, because its the same set after all and it was already loaded once. But with avx2, this fails: nft reports a clashing element. The reported clash is of following form: We successfully re-inserted a . b c . d Then we try to insert a . d avx2 finds the already existing a . d, which (due to 'flush set') is marked as invalid in the new generation. It skips the element and moves to next. Due to incorrect masking, the skip-step finds the next matching element *only considering the first field*, i.e. we return the already reinserted "a . b", even though the last field is different and the entry should not have been matched. No such error is reported for the generic c implementation (no avx2) or when the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback. Bisection points to 7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection") but that fix merely uncovers this bug. Before this commit, the wrong element is returned, but erronously reported as a full, identical duplicate. The root-cause is too early return in the avx2 match functions. When we process the last field, we should continue to process data until the entire input size has been consumed to make sure no stale bits remain in the map. | ||||
| CVE-2026-43128 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix double dma_buf_unpin in failure path In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf is immediately unpinned but the umem_dmabuf->pinned flag is still set. Then, when ib_umem_release() is called, it calls ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again. Fix this by removing the immediate unpin upon failure and just let the ib_umem_release/revoke path handle it. This also ensures the proper unmap-unpin unwind ordering if the dmabuf_map_pages call happened to fail due to dma_resv_wait_timeout (and therefore has a non-NULL umem_dmabuf->sgt). | ||||
| CVE-2026-43115 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: srcu: Use irq_work to start GP in tiny SRCU Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(), which acquires the workqueue pool->lock. This causes a lockdep splat when call_srcu() is called with a scheduler lock held, due to: call_srcu() [holding pi_lock] srcu_gp_start_if_needed() schedule_work() -> pool->lock workqueue_init() / create_worker() [holding pool->lock] wake_up_process() -> try_to_wake_up() -> pi_lock Also add irq_work_sync() to cleanup_srcu_struct() to prevent a use-after-free if a queued irq_work fires after cleanup begins. Tested with rcutorture SRCU-T and no lockdep warnings. [ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work to start process_srcu()" ] | ||||
| CVE-2026-43116 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ensure safe access to master conntrack Holding reference on the expectation is not sufficient, the master conntrack object can just go away, making exp->master invalid. To access exp->master safely: - Grab the nf_conntrack_expect_lock, this gets serialized with clean_from_lists() which also holds this lock when the master conntrack goes away. - Hold reference on master conntrack via nf_conntrack_find_get(). Not so easy since the master tuple to look up for the master conntrack is not available in the existing problematic paths. This patch goes for extending the nf_conntrack_expect_lock section to address this issue for simplicity, in the cases that are described below this is just slightly extending the lock section. The add expectation command already holds a reference to the master conntrack from ctnetlink_create_expect(). However, the delete expectation command needs to grab the spinlock before looking up for the expectation. Expand the existing spinlock section to address this to cover the expectation lookup. Note that, the nf_ct_expect_iterate_net() calls already grabs the spinlock while iterating over the expectation table, which is correct. The get expectation command needs to grab the spinlock to ensure master conntrack does not go away. This also expands the existing spinlock section to cover the expectation lookup too. I needed to move the netlink skb allocation out of the spinlock to keep it GFP_KERNEL. For the expectation events, the IPEXP_DESTROY event is already delivered under the spinlock, just move the delivery of IPEXP_NEW under the spinlock too because the master conntrack event cache is reached through exp->master. While at it, add lockdep notations to help identify what codepaths need to grab the spinlock. | ||||
| CVE-2024-33288 | 2026-05-08 | 7.3 High | ||
| Prison Management System Using PHP v1.0 was discovered to contain a SQL injection vulnerability via the username on the Admin login page. | ||||
| CVE-2026-43129 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ima: verify the previous kernel's IMA buffer lies in addressable RAM Patch series "Address page fault in ima_restore_measurement_list()", v3. When the second-stage kernel is booted via kexec with a limiting command line such as "mem=<size>" we observe a pafe fault that happens. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) not-present page This happens on x86_64 only, as this is already fixed in aarch64 in commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer against memory bounds") This patch (of 3): When the second-stage kernel is booted with a limiting command line (e.g. "mem=<size>"), the IMA measurement buffer handed over from the previous kernel may fall outside the addressable RAM of the new kernel. Accessing such a buffer can fault during early restore. Introduce a small generic helper, ima_validate_range(), which verifies that a physical [start, end] range for the previous-kernel IMA buffer lies within addressable memory: - On x86, use pfn_range_is_mapped(). - On OF based architectures, use page_is_ram(). | ||||
| CVE-2026-43112 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath When cifs_sanitize_prepath is called with an empty string or a string containing only delimiters (e.g., "/"), the current logic attempts to check *(cursor2 - 1) before cursor2 has advanced. This results in an out-of-bounds read. This patch adds an early exit check after stripping prepended delimiters. If no path content remains, the function returns NULL. The bug was identified via manual audit and verified using a standalone test case compiled with AddressSanitizer, which triggered a SEGV on affected inputs. | ||||
| CVE-2024-45257 | 2026-05-08 | 7.3 High | ||
| A Command Injection issue in the payload build page in BYOB (Build Your Own Botnet) 2.0 allows attackers to execute arbitrary commands on the server via a crafted build parameter. This occurs in freeze in core/generators.py. | ||||
| CVE-2026-43118 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix zero size inode with non-zero size after log replay When logging that an inode exists, as part of logging a new name or logging new dir entries for a directory, we always set the generation of the logged inode item to 0. This is to signal during log replay (in overwrite_item()), that we should not set the i_size since we only logged that an inode exists, so the i_size of the inode in the subvolume tree must be preserved (as when we log new names or that an inode exists, we don't log extents). This works fine except when we have already logged an inode in full mode or it's the first time we are logging an inode created in a past transaction, that inode has a new i_size of 0 and then we log a new name for the inode (due to a new hardlink or a rename), in which case we log an i_size of 0 for the inode and a generation of 0, which causes the log replay code to not update the inode's i_size to 0 (in overwrite_item()). An example scenario: mkdir /mnt/dir xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo sync xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo ln /mnt/dir/foo /mnt/dir/bar xfs_io -c "fsync" /mnt/dir <power fail> After log replay the file remains with a size of 64K. This is because when we first log the inode, when we fsync file foo, we log its current i_size of 0, and then when we create a hard link we log again the inode in exists mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we add to the log tree, so during log replay overwrite_item() sees that the generation is 0 and i_size is 0 so we skip updating the inode's i_size from 64K to 0. Fix this by making sure at fill_inode_item() we always log the real generation of the inode if it was logged in the current transaction with the i_size we logged before. Also if an inode created in a previous transaction is logged in exists mode only, make sure we log the i_size stored in the inode item located from the commit root, so that if we log multiple times that the inode exists we get the correct i_size. A test case for fstests will follow soon. | ||||
| CVE-2026-43359 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort on set received ioctl due to item overflow If the set received ioctl fails due to an item overflow when attempting to add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction since we did some metadata updates before. This means that if a user calls this ioctl with the same received UUID field for a lot of subvolumes, we will hit the overflow, trigger the transaction abort and turn the filesystem into RO mode. A malicious user could exploit this, and this ioctl does not even requires that a user has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume. Fix this by doing an early check for item overflow before starting a transaction. This is also race safe because we are holding the subvol_sem semaphore in exclusive (write) mode. A test case for fstests will follow soon. | ||||
| CVE-2026-43369 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix NULL pointer dereference in device cleanup When GPU initialization fails due to an unsupported HW block IP blocks may have a NULL version pointer. During cleanup in amdgpu_device_fini_hw, the code calls amdgpu_device_set_pg_state and amdgpu_device_set_cg_state which iterate over all IP blocks and access adev->ip_blocks[i].version without NULL checks, leading to a kernel NULL pointer dereference. Add NULL checks for adev->ip_blocks[i].version in both amdgpu_device_set_cg_state and amdgpu_device_set_pg_state to prevent dereferencing NULL pointers during GPU teardown when initialization has failed. (cherry picked from commit b7ac77468cda92eecae560b05f62f997a12fe2f2) | ||||
| CVE-2026-43133 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB. | ||||
| CVE-2026-42794 | 1 Absinthe-graphql | 1 Absinthe Plug | 2026-05-08 | N/A |
| Improper Neutralization of Input During Web Page Generation (XSS) vulnerability in absinthe-graphql absinthe_plug allows reflected cross-site scripting via the GraphiQL interface. 'Elixir.Absinthe.Plug.GraphiQL':js_escape/1 in lib/absinthe/plug/graphiql.ex escapes single quotes and newlines in the query GET parameter before embedding it in an inline JavaScript string, but does not escape backslashes. An attacker can bypass the escaping by prefixing a quote with a backslash (e.g. \'), breaking out of the string context and executing arbitrary JavaScript in the victim's browser. This issue affects absinthe_plug: from 1.2.0. | ||||