| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Image Signature Verification feature of Cisco SD-WAN Software could allow an authenticated, remote attacker with Administrator-level credentials to install a malicious software patch on an affected device.
The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by crafting an unsigned software patch to bypass signature checks and loading it on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.Cisco has released software updates that address the vulnerability described in this advisory. There are no workarounds that address this vulnerability. |
| ABB is aware of privately reported vulnerabilities in the product versions referenced in this CVE. An attacker could exploit these vulnerabilities by sending a specially crafted firmware or configuration to the system node, causing the node to stop, become inaccessible, or allowing the attacker to take control of the node. |
| ALTCHA is privacy-first software for captcha and bot protection. A cryptographic semantic binding flaw in ALTCHA libraries allows challenge payload splicing, which may enable replay attacks. The HMAC signature does not unambiguously bind challenge parameters to the nonce, allowing an attacker to reinterpret a valid proof-of-work submission with a modified expiration value. This may allow previously solved challenges to be reused beyond their intended lifetime, depending on server-side replay handling and deployment assumptions. The vulnerability primarily impacts abuse-prevention mechanisms such as rate limiting and bot mitigation. It does not directly affect data confidentiality or integrity. This issue has been addressed by enforcing explicit semantic separation between challenge parameters and the nonce during HMAC computation. Users are advised to upgrade to patched versions, which include version 1.0.0 of the altcha Golang package, version 1.0.0 of the altcha Rubygem, version 1.0.0 of the altcha pip package, version 1.0.0 of the altcha Erlang package, version 1.4.1 of the altcha-lib npm package, version 1.3.1 of the altcha-org/altcha Composer package, and version 1.3.0 of the org.altcha:altcha Maven package. As a mitigation, implementations may append a delimiter to the end of the `salt` value prior to HMAC computation (for example, `<salt>?expires=<time>&`). This prevents ambiguity between parameters and the nonce and is backward-compatible with existing implementations, as the delimiter is treated as a standard URL parameter separator. |
| Node-SAML is a SAML library not dependent on any frameworks that runs in Node. In versions 5.0.1 and below, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. This issue is fixed in version 5.1.0. |
| Hyperbridge is a hyper-scalable coprocessor for verifiable, cross-chain interoperability. A critical vulnerability was discovered in the ismp-grandpa crate, that allowed a malicious prover easily convince the verifier of the finality of arbitrary headers. This could be used to steal funds or compromise other kinds of cross-chain applications. This vulnerability is fixed in 15.0.1. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X12STW-F . An attacker can update the system firmware with a specially crafted image. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image. |
| tiny-secp256k1 is a tiny secp256k1 native/JS wrapper. Prior to version 1.1.7, a malicious JSON-stringifyable message can be made passing on verify(), when global Buffer is the buffer package. This affects only environments where require('buffer') is the NPM buffer package. Buffer.isBuffer check can be bypassed, resulting in strange objects being accepted as a message, and those messages could trick verify() into returning false-positive true values. This issue has been patched in version 1.1.7. |
| xml-crypto is an xml digital signature and encryption library for Node.js. In affected versions the default configuration does not check authorization of the signer, it only checks the validity of the signature per section 3.2.2 of the w3 xmldsig-core-20080610 spec. As such, without additional validation steps, the default configuration allows a malicious actor to re-sign an XML document, place the certificate in a `<KeyInfo />` element, and pass `xml-crypto` default validation checks. As a result `xml-crypto` trusts by default any certificate provided via digitally signed XML document's `<KeyInfo />`. `xml-crypto` prefers to use any certificate provided via digitally signed XML document's `<KeyInfo />` even if library was configured to use specific certificate (`publicCert`) for signature verification purposes. An attacker can spoof signature verification by modifying XML document and replacing existing signature with signature generated with malicious private key (created by attacker) and by attaching that private key's certificate to `<KeyInfo />` element. This vulnerability is combination of changes introduced to `4.0.0` on pull request 301 / commit `c2b83f98` and has been addressed in version 6.0.0 with pull request 445 / commit `21201723d`. Users are advised to upgrade. Users unable to upgrade may either check the certificate extracted via `getCertFromKeyInfo` against trusted certificates before accepting the results of the validation or set `xml-crypto's getCertFromKeyInfo` to `() => undefined` forcing `xml-crypto` to use an explicitly configured `publicCert` or `privateKey` for signature verification. |
| A vulnerability has been identified in Mendix SAML (Mendix 10.12 compatible) (All versions < V4.0.3), Mendix SAML (Mendix 10.21 compatible) (All versions < V4.1.2), Mendix SAML (Mendix 9.24 compatible) (All versions < V3.6.21). Affected versions of the module insufficiently enforce signature validation and binding checks. This could allow unauthenticated remote attackers to hijack an account in specific SSO configurations. |
| sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a validly-signed but "mismatched" bundle is presented as proof of inclusion into a transparency log. This bug impacts clients using any variation of KeylessVerifier.verify(). The verifier may accept a bundle with an unrelated log entry, cryptographically verifying everything but fails to ensure the log entry applies to the artifact in question, thereby "verifying" a bundle without any proof the signing event was logged. This allows the creation of a bundle without fulcio certificate and private key combined with an unrelated but time-correct log entry to fake logging of a signing event. A malicious actor using a compromised identity may want to do this to prevent discovery via rekor's log monitors. The signer's identity will still be available to the verifier. The signature on the bundle must still be on the correct artifact for the verifier to pass. sigstore-gradle-plugin and sigstore-maven-plugin are not affected by this as they only provide signing functionality. This issue has been patched in v1.1.0 release with PR #856. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| The OpenSAML C++ library before 3.3.1 allows forging of signed SAML messages via parameter manipulation (when using SAML bindings that rely on non-XML signatures). |
| An improper file signature check in Palo Alto Networks Cortex XDR agent may allow an attacker to bypass the Cortex XDR agent's executable blocking capabilities and run untrusted executables on the device. This issue can be leveraged to execute untrusted software without being detected or blocked. |
| The SimpleSAMLphp SAML2 library is a PHP library for SAML2 related functionality. Prior to versions 4.17.0 and 5.0.0-alpha.20, there is a signature confusion attack in the HTTPRedirect binding. An attacker with any signed SAMLResponse via the HTTP-Redirect binding can cause the application to accept an unsigned message. Versions 4.17.0 and 5.0.0-alpha.20 contain a fix for the issue. |
| Under certain circumstances, BIND is too lenient when accepting records from answers, allowing an attacker to inject forged data into the cache.
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1. |
| Cryptographic validation of upgrade images could be circumventing by dropping a specifically crafted file into the upgrade ISO |
| Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.4.0, Ed25519 signature verification accepts forged non-canonical signatures where the scalar S is not reduced modulo the group order (`S >= L`). A valid signature and its `S + L` variant both verify in forge, while Node.js `crypto.verify` (OpenSSL-backed) rejects the `S + L` variant, as defined by the specification. This class of signature malleability has been exploited in practice to bypass authentication and authorization logic (see CVE-2026-25793, CVE-2022-35961). Applications relying on signature uniqueness (i.e., dedup by signature bytes, replay tracking, signed-object canonicalization checks) may be bypassed. Version 1.4.0 patches the issue. |
| Botan is a C++ cryptography library. From version 3.0.0 to before version 3.11.0, during X509 path validation, OCSP responses were checked for an appropriate status code, but critically omitted verifying the signature of the OCSP response itself. This issue has been patched in version 3.11.0. |
| OneUptime is an open-source monitoring and observability platform. Prior to version 10.0.42, OneUptime's SAML SSO implementation (App/FeatureSet/Identity/Utils/SSO.ts) has decoupled signature verification and identity extraction. isSignatureValid() verifies the first <Signature> element in the XML DOM using xml-crypto, while getEmail() always reads from assertion[0] via xml2js. An attacker can prepend an unsigned assertion containing an arbitrary identity before a legitimately signed assertion, resulting in authentication bypass. This issue has been patched in version 10.0.42. |
| An improper verification of cryptographic signature vulnerability exists in Cortex XSOAR and Cortex XSIAM platforms during integration of Microsoft Teams that enables an unauthenticated user to access and modify protected resources. |
