| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: intel: int3400: clean up ODVP on probe failures
evaluate_odvp() creates per-ODVP sysfs files before the thermal zone
and later probe resources are registered. The current unwind path only
calls cleanup_odvp() from the late sysfs failure path, so failures after
evaluate_odvp() but before that label, including
thermal_tripless_zone_device_register() failures, leave the ODVP files
and storage behind.
Move the ODVP cleanup to the common ART/TRT unwind path so every failure
after evaluate_odvp() releases the ODVP state. Also clear the cached
ODVP pointers in cleanup_odvp(), because evaluate_odvp() can already call
it for partial setup failures while probe continues. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in ib_destroy_cq_user()
When accessing a CQ via the netlink path the only synchronization
mechanism for the said CQ is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_destroy_cq_user(), which is too late, since by that point
vendor-specific resources associated with the CQ might already be
freed. This can leave a short window where the CQ remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
ib_destroy_cq_user(), ensuring that the CQ is removed from restrack
before its internal resources are released. This guarantees that no new
users hold references to a CQ that is in the process of destruction.
In addition, this change preserves the intended inverted order
between create and destroy routines: resources are added to
restrack at the end of successful creation, and hence shall be removed
from the restrack first thing during the destruction flow, which keeps
the lifecycle management consistent and predictable. |
| Exim before 4.100.1, when Proxy-Protocol is used with an attacker-controlled proxy, has an out-of-bounds write. |
| Exim before 4.100.1, when certain non-default TLS settings are used with GnuTLS, has a use-after-free. |
| Exim before 4.100.1, when Proxy-Protocol is used with an attacker-controlled proxy, allows attackers to read certain uninitialized data from stack memory. |
| Exim before 4.100.1 allows SMTP smuggling in which the received message does not match any sent message, and instead depends on crafted data sent after a rejection during DATA processing. |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of input during web page generation. |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary SQL commands due to improper neutralization of special elements used in an SQL command. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: validate thread record before delete key rebuild
hfsplus_delete_cat() is called with str == NULL when the last open
reference to an unlinked HFS+ hardlink backing inode is closed. In that
case, the function finds the catalog thread by CNID and rebuilds the
catalog key from thread.nodeName.
That reconstruction path reads thread.nodeName.length directly from the
catalog B-tree into fd.search_key and then copies length * 2 bytes into
fd.search_key->cat.name.unicode. It does not first check that the found
record is a thread record or that its size matches the thread name.
A corrupted image can therefore provide an oversized thread name length
and make hfs_bnode_read() write past the catalog search-key allocation.
Read the CNID record through hfsplus_brec_read_cat(), which bounds the
record read to sizeof(hfsplus_cat_entry) and verifies that a thread
record's size exactly matches nodeName.length. Together, these checks
ensure an accepted thread name fits HFSPLUS_MAX_STRLEN. Reject non-thread
records before building the delete key from the validated thread name.
Share the thread-record-type helper between hfsplus_find_cat() and
hfsplus_delete_cat(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths
The error paths for endpoint-disabled (ESHUTDOWN) and request-allocation
failure (ENOMEM) in ffs_dmabuf_transfer() jump to err_fence_put which
calls dma_fence_put() on the fence. However, at that point the fence has
only been kmalloc'd — dma_fence_init() has not been called yet, so the
refcount and the fence ops are uninitialized. Calling dma_fence_put() on
such an object leads to undefined behavior.
Use kfree() instead, since the fence is just a plain allocation at this
stage, and rename the label to err_fence_free to reflect the actual
cleanup action. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject writes through untrusted BTF pointers
check_ptr_to_btf_access() lets program-type btf_struct_access callbacks
validate writes before the default BTF access path rejects non-read
accesses. That bypasses the read-only policy for untrusted BTF pointers
created by helpers such as bpf_rdonly_cast().
Reject non-read accesses through PTR_UNTRUSTED BTF pointers at the
common entry point, before the callback branch to handle all cases. |
| NUUO Network Video Recorder 2.0.0 is vulnerable to Command Injection in handle_import_privilege.php. |
| NUUO Network Video Recorder 2.0.0 is vulnerable to arbitrary file read. In up.php, the url parameter submitted by the user via POST is received, and fopen() is used to open the URL in binary read-only mode. The content is then written to the /tmp/ directory, with the filename derived from basename() of the URL. This operation requires no authentication. |
| The Unbounce Landing Pages WordPress plugin before 1.1.5 does not perform any authorisation check when updating the configuration its front-end proxy relies on, allowing any authenticated user, such as a subscriber, to point that proxy at a host they control and have arbitrary content served from the site's own origin. |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. Prior to 1.7.4, GET /pool/lead/get/{id} in PoolClueController.get and GET /pool/account/get/{id} in PoolCustomerController.get use bare pool-read permission checks without the CsPermission resourceId binding that enforces per-record data scope. An authenticated user with the ordinary CLUE_MANAGEMENT_POOL:READ or CUSTOMER_MANAGEMENT_POOL:READ permission can supply another record's id and cause unscoped primary-key getters to return leads or accounts owned by other users, departments, or organizations. Exposed data includes contact names, phone numbers, owner and department attribution, and custom field values. This issue is fixed in version 1.7.4. |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. In version 1.7.3, ApprovalResourceService.sendWebHook reads WebHookConfig.webHookUrl from stored approval-node configuration and passes it through ApprovalFlowService.updateApprovalPostField to HttpClientUtils without the SSRF validation used by the optional testConnect path. A user with PROCESS_SETTING_ADD can configure an internal URL through POST /approval-flow/add and cause the server to request it when POST /approval-action/approve executes the approval action, enabling cloud metadata access, internal network reconnaissance, and interaction with reachable internal services. This issue is fixed in version 1.7.4. |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. Prior to 1.7.4, ShiroFilter configures /attachment/preview/{id} and /pic/preview/{id} as anonymous, and both routes call AttachmentService.getResource, which performs a bare primary-key lookup without ownership, organization, or permission checks. An unauthenticated caller who guesses or observes an id generated by IDGenerator.nextStr can download files uploaded by users in other organizations because the stored organization id is used only to locate the file rather than authorize the caller. This issue is fixed in version 1.7.4. |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. From 1.7.0 until 1.7.4, POST /account-pool/page allows an authenticated caller with MODULE_SETTING_UPDATE to place an arbitrary database function in SortRequest.name because CustomerPoolController.page omits Spring request validation, SortRequest.getName relies on an incomplete blacklist, and the CommonMapper.xml sort fragment inserts ${sortName} into an ORDER BY clause. Functions such as extractvalue and updatexml bypass the blacklist and can expose database values through an error oracle when the query returns at least one row. This issue is fixed in version 1.7.4. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, DNS-over-HTTP/2 processing in rust/src/http2/http2.rs retains previously processed HTTP/2 DATA frame contents instead of clearing the internal buffer. Multiple DATA frames with the EndOfStream flag set can grow the buffer to its 65 KiB limit while causing all prior contents to be processed again, producing quadratic CPU complexity, degraded packet processing, loss of monitoring visibility, or denial of service. This issue is fixed in version 8.0.6. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, src/flow-hash.c can treat an IPv4 and IPv6 flow as equal without comparing the IP family when their raw address words, ports, protocol, VLAN, recursion level, live device, and hash bucket align. An IPv6 packet can therefore reuse IPv4 flow state or the reverse, causing incorrect flowbit state, detection bypass, or IP-only bypass. This issue is fixed in versions 8.0.6 and 7.0.17. |
