| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ltc4282) Fix reading the minimum alarm voltage
Coverity reports an out-of-bounds access when reading the minimum alarm
voltage for the VGPIO channel. Add the missing return statement to fix
the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Avoid double-deactivate of IRQs in the nested context
In the nested state, the physical interrupt has already been
deactivated through the HW bit in the LR. The extra deactivation
would be harmless but can hit an errata case on AmpereOne, so
avoid it here.
On AmpereOne, deactivating a physical interrupt through
ICC_DIR_EL1 or ICC_EOIR1_EL1 (depending on EOImode) which is not
active, but is the highest priority pending interrupt causes the
cpu to lose the interrupt pending state and also prevents the
delivery of future interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix missing authorization check in KFD_IOC_DBG_TRAP_DISABLE
Prevent unauthorized termination of active GPU debug sessions.
Previously, users with /dev/kfd access could terminate another process's
debug session without proper ownership or ptrace authorization.
(cherry picked from commit 4db4c5ffd5585b72622ecf6ffedf2da258ee23f5) |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: do not propagate one-packet flag to synced conns
Synced connections can be created before their destination exists. When
the destination is later added, ip_vs_bind_dest() copies connection flags
from the destination into cp->flags.
IP_VS_CONN_F_ONE_PACKET connections are not synced. If a synced
connection inherits IP_VS_CONN_F_ONE_PACKET while it is already hashed,
expiry can treat it as a one-packet connection and skip unlinking the
existing conn_tab node, leaving stale hash nodes pointing at a freed
struct ip_vs_conn.
Drop IP_VS_CONN_F_ONE_PACKET from destination flags when binding synced
connections. |
| In the Linux kernel, the following vulnerability has been resolved:
of: reserved_mem: prevent OOB when too many dynamic regions are defined
On boot, fdt_scan_reserved_mem() saves each dynamically-placed
/reserved-memory subnode into a local array of size
MAX_RESERVED_REGIONS.
If the device tree defines more than MAX_RESERVED_REGIONS
dynamically-placed regions, fdt_scan_reserved_mem() writes past the
end of the local array.
Add a bounds check that logs an error and skips the excess regions,
restoring the original behavior. |
| The Customer Reviews for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the aggregated review form submission in versions up to and including 5.106.0. This is due to insufficient input sanitization and output escaping on user-supplied review comment text. The plugin accepts review submissions from unauthenticated users through the 'cr_local_forms_submit' AJAX action without sanitizing HTML content before storing it via wp_insert_comment(), and later renders this stored content on product pages through comment_text() without proper escaping. This makes it possible for unauthenticated attackers with a valid review form URL (obtainable through review reminder emails sent to customers who placed orders) to inject arbitrary web scripts in pages that will execute whenever a user accesses the affected product page. |
| The Everest Forms plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 3.4.4. This is due to the `load_previous_field_value()` method in `class-evf-form-task.php` accepting arbitrary URL values from `$_POST` data for upload fields without domain restriction, which are then passed to `wp_remote_head()` in the `get_local_file_size()` method of `class-evf-form-fields-upload.php`. This makes it possible for unauthenticated attackers to force the WordPress server to make outbound HTTP HEAD requests to arbitrary URLs by submitting a form with an upload field containing a malicious URL while leaving a required field empty to trigger form re-rendering. |
| The WP Rocket plugin for WordPress is vulnerable to Stored Cross-Site Scripting in versions up to, and including, 3.21.0.1. This is due to insufficient input sanitization and output escaping of user-supplied data via the rocket_beacon AJAX endpoint. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Envira Gallery plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the gallery 'description' configuration field in all versions up to, and including, 1.12.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses a page displaying the gallery with a description enabled. |
| Uncontrolled Recursion vulnerability in the Elixir standard library allows an attacker who controls a list passed to inspect/1, List.to_string/1, or List.to_charlist/1 to exhaust a BEAM node's memory.
Inspect.List's charlist branch in lib/elixir/lib/inspect.ex classifies a list as a charlist using List.ascii_printable?/2, which examines only the first :printable_limit (4096 by default) elements, and then calls IO.chardata_to_string/1 on the whole term. A list whose printable prefix exceeds that limit but which contains a later element that is not a code point (an atom, an out-of-range integer, or an improper tail) is therefore mis-classified, and the conversion raises ArgumentError. That conversion runs inside List.to_string/1, whose rescue clause builds its message by interpolating inspect(list), which re-enters the same branch and raises again. The nested inspection is an argument to raise, so the recursion is not in tail position and every level is retained: the process stack grows monotonically while each cycle re-walks the list, until the process is killed by max_heap_size or, by default, the node runs out of memory. List.to_charlist/1 has the same rescue shape.
Below the printable limit the inner inspect/1 sees the invalid element within its counter and renders the list in ordinary bracket form, so a single ArgumentError is raised and no recursion occurs.
This issue affects elixir: from 1.15.0-rc.0 before 1.18.5, from 1.19.0-rc.0 before 1.19.6, and from 1.20.0-rc.0 before 1.20.4. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del
fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at
the 'out:' label, but only calls the matching get_cpu_var() after the
'i < 0' early-return check. When event->hw.idx is negative the
function jumps to 'out:' without having taken get_cpu_var(), and the
trailing put_cpu_var() then issues an unmatched preempt_enable(),
underflowing preempt_count.
On a CONFIG_PREEMPT=y kernel preempt_count would underflow and
eventually present as a 'scheduling while atomic' BUG.
Move put_cpu_var() to pair with get_cpu_var() so the percpu access is
correctly bracketed and the 'out:' label only handles perf_pmu_enable. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Serialize readq reset state with q->lock
snd_seq_oss_readq_clear() resets qlen, head, and tail without
q->lock even though the normal reader and producer paths serialize the
same ring state under that spinlock. A reset can therefore race
snd_seq_oss_readq_free() or snd_seq_oss_readq_put_event() and leave
stale records in the queue, drop freshly queued ones, or report the
wrong readiness after wakeup. KCSAN reports a data race between
snd_seq_oss_readq_clear() and snd_seq_oss_readq_free().
Take q->lock while clearing the ring and resetting input_time. Factor
the enqueue logic into a caller-locked helper so
snd_seq_oss_readq_put_timestamp() updates its suppression state under
the same lock instead of racing the reset path.
The buggy scenario involves two paths, with each column showing the
order within that path:
reset path: locked readq updater:
1. snd_seq_oss_reset() or 1. A reader or callback producer
release reaches takes q->lock on the same queue.
snd_seq_oss_readq_clear().
2. snd_seq_oss_readq_clear() 2. The updater tests or modifies
resets qlen, head, tail, qlen, head, and tail.
and input_time.
3. snd_seq_oss_readq_clear() 3. The updater completes its
wakes sleepers on read-modify-write sequence.
q->midi_sleep.
4. Without q->lock, the reset 4. The resulting ring state drives
can overlap the locked later reads and readiness.
update.
KCSAN reports:
BUG: KCSAN: data-race in snd_seq_oss_readq_clear /
snd_seq_oss_readq_free
write to 0xffff8881069fe608 of 4 bytes by task 120516 on cpu 0:
snd_seq_oss_readq_free+0x6c/0x80
snd_seq_oss_read+0xcb/0x250
odev_read+0x38/0x60
vfs_read+0xff/0x600
ksys_read+0xb4/0x140
__x64_sys_read+0x46/0x60
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff8881069fe608 of 4 bytes by task 120517 on cpu 1:
snd_seq_oss_readq_clear+0x1f/0x90
snd_seq_oss_reset+0xa7/0xf0
snd_seq_oss_ioctl+0x6f6/0x7e0
odev_ioctl+0x56/0xc0
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000001 -> 0x00000000 |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: npc: Fix size of entry2cntr_map
KASAN prints below splat. This is caused by allocating counter for
reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map
is not allocated for reserved entries.
BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0
Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14
CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1
Hardware name: Marvell CN106XX board (DT)
Workqueue: events work_for_cpu_fn
Call trace:
dump_backtrace.part.0+0xe4/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x88/0xb4
print_report+0x154/0x458
kasan_report+0xb8/0x194
__asan_store2+0x7c/0xa0
npc_map_mcam_entry_and_cntr+0xb0/0x1a0
rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280
npc_install_flow+0x840/0xfe0
rvu_npc_install_cpt_pass2_entry+0x138/0x190
rvu_nix_init+0x148c/0x2880
rvu_probe+0x1800/0x30b0
local_pci_probe+0x78/0xe0
work_for_cpu_fn+0x30/0x50
process_one_work+0x4cc/0x97c
worker_thread+0x360/0x630
kthread+0x1a0/0x1b0
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: lzo: reject compressed segment that overflows the compressed input
lzo_decompress_bio() validates each on-disk segment length seg_len only
against the workspace cbuf size, not against the compressed input size
(compressed_len, the total folio bytes of the bio). A crafted extent can
carry a segment whose seg_len passes the cbuf check but runs past the end
of the bio, so copy_compressed_segment() walks off the last folio:
get_current_folio() then returns the NULL folio from bio_next_folio(), and
with CONFIG_BTRFS_ASSERT disabled (default) folio_size(NULL) faults.
BUG: KASAN: null-ptr-deref in lzo_decompress_bio (fs/btrfs/lzo.c:383)
Read of size 8 at addr 0000000000000000 by task kworker/u8:1/29
Workqueue: btrfs-endio simple_end_io_work
kasan_report (mm/kasan/report.c:590)
lzo_decompress_bio (fs/btrfs/lzo.c:383)
end_bbio_compressed_read (fs/btrfs/compression.c:1065)
btrfs_bio_end_io (fs/btrfs/bio.c:135)
btrfs_check_read_bio (fs/btrfs/bio.c:180 fs/btrfs/bio.c:285)
simple_end_io_work
process_one_work
worker_thread
Reject any segment whose payload would extend beyond compressed_len before
copying it, treating it as corruption like the other on-disk validation
failures in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag
The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps
inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the
decrement still happens and wraps it to 255. The break only leaves
the inner switch -- a later path entry can set info->indev back to
a real device, and we end up returning with num_encaps == 255.
nft_dev_forward_path() then walks info.encap[] (size 2) up to
num_encaps, which means an OOB stack read and a bogus count copied
into the route descriptor.
Should only happen on a malformed bridge path stack, hence the WARN,
but worth handling sanely. Move the decrement out of the WARN.
[ While at this, remove the WARN_ON_ONCE since this can only happen
with a buggy bridge path stack --pablo ]. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix OOB in scmi_power_name_get()
scmi_power_name_get() does not validate the domain number passed by the
external caller, which may lead to an out-of-bounds access.
Fix this by returning "unknown" for invalid domains, like
scmi_reset_name_get() does. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL
dsm_create() initially checks pdev->bus when computing segment_id:
u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0;
But the next two lines unconditionally dereference pdev->bus via
pcie_find_root_port() and especially pci_dev_id(pdev), which expands
to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact
NULL, segment_id is initialised to 0 but the very next statement
crashes the kernel.
smatch flags this:
drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we
previously assumed 'pdev->bus' could be null (see line 251)
Make the NULL handling consistent: if pdev->bus is NULL the device
has no PCI context to work with and SEV TIO setup cannot proceed,
so return -ENODEV before any of the bus-dependent lookups. The
remaining initialisation now runs only on the path where pdev->bus
is known to be valid.
No change for callers where pdev->bus is non-NULL, which is the
only case where dsm_create() did meaningful work before this change. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: xilinx: Fix race condition in event registration
The zynqmp_power driver registers handlers for suspend and subsystem
restart events using register_event(). However, the work structures
(zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by
these handlers were allocated and initialized after the registration
call.
This created a race window where, if the firmware triggered an event
immediately after registration but before allocation, the callback
(suspend_event_callback or subsystem_restart_event_callback) would
dereference a NULL pointer in work_pending(), leading to a crash.
Fix this by allocating and initializing the work structures before
registering the events. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: Add a sanity check for btree node size
Syzbot reported an uninit-value bug in [1] with a corrupted HFS+ image,
during the file system mounting process, specifically while loading the
catalog, a corrupted node_size value of 1 caused the rec_off argument
passed to hfs_bnode_read_u16() (within hfs_bnode_find()) to be excessively
large. Consequently, the function failed to return a valid value to
initialize the off variable, triggering the bug [1].
Every node starts from BTree node descriptor: struct hfs_bnode_desc.
So, the size of node cannot be lesser than that. However, technical
specification declares that: "The node size (which is expressed in bytes)
must be power of two, from 512 through 32,768, inclusive." Add a check
for btree node size base on technical specification.
[1]
BUG: KMSAN: uninit-value in hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584
hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584
hfsplus_btree_open+0x169a/0x1e40 fs/hfsplus/btree.c:382
hfsplus_fill_super+0x111f/0x2770 fs/hfsplus/super.c:553
get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694
get_tree_bdev+0x38/0x50 fs/super.c:1717
hfsplus_get_tree+0x35/0x40 fs/hfsplus/super.c:709
vfs_get_tree+0xb3/0x5d0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (occ) unregister sysfs devices outside occ lock
occ_active(false) and occ_shutdown() unregister sysfs-backed devices while
occ->lock is held. hwmon_device_unregister() and sysfs_remove_group() can
wait for active sysfs callbacks to drain, and those callbacks can enter the
OCC update path and try to take occ->lock again. That gives the unregister
paths the lock ordering occ->lock -> sysfs callback drain, while a callback
has the opposite edge sysfs callback -> occ->lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the real unregister and callback carrier:
occ_shutdown()
hwmon_device_unregister()
occ_show_temp_1()
occ_update_response()
Lockdep reported the circular dependency with occ_shutdown() already
holding the OCC mutex and hwmon_device_unregister() waiting on the sysfs
side:
WARNING: possible circular locking dependency detected
... (sysfs_lock) ... at: hwmon_device_unregister+0x12/0x30 [vuln_msv]
... (&test_occ.lock) ... at: occ_shutdown.constprop.0+0xe/0x40 [vuln_msv]
occ_update_response.isra.0+0xb/0x20 [vuln_msv]
occ_show_temp_1.constprop.0.isra.0+0x23/0x40 [vuln_msv]
*** DEADLOCK ***
Serialize hwmon registration and removal with a separate hwmon_lock.
Under that lock, detach occ->hwmon and update occ->active while occ->lock
is held so concurrent OCC state changes still see a stable state, then
drop occ->lock before calling hwmon_device_unregister(). Remove the
driver sysfs group before taking occ->lock in occ_shutdown(), so draining
the driver attributes cannot wait while the OCC mutex is held. Also make
OCC update callbacks return -ENODEV after deactivation, so callbacks that
already passed sysfs active protection do not poll the hardware after
teardown has detached the hwmon device. |
