| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a malformed but non-empty BACnet WriteProperty request can drive the official server demo into a non-terminating request-processing loop with repeated heap-backed side effects. This results in a remote unauthenticated denial of service via uncontrolled resource consumption and a non-terminating request path. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate
A migrate_disable()'d RT task cannot be moved to another CPU, but the
scheduler still keeps such a task on that CPU's pushable list
(rq->rt.pushable_tasks) and still marks the runqueue RT-overloaded
(rq->rt.overloaded = 1). So the RT balancer keeps treating this CPU as
having a task to move away, and keeps trying to move the task, but the
push can never succeed. When the head is pinned, push_rt_task() does not
give up either. It falls back to pushing rq->curr instead, using the
per-CPU stopper, as added by commit a7c81556ec4d ("sched: Fix
migrate_disable() vs rt/dl balancing").
The CPU spends tens of milliseconds in this retry loop. The core is
isolated for real-time work, but during the loop nearly half of its time
is consumed by pushes that cannot succeed.
An ftrace capture of the affected CPU, with sched_switch enabled and
commit 94894c9c477e ("sched/rt: Skip currently executing CPU in
rto_next_cpu()") applied, shows where the CPU time went. Two SCHED_FIFO
tasks at equal priority shared the CPU, taskA migrate_disable()'d and
queued, taskB as rq->curr. In one 89 ms window, taskB got only 52 ms of
CPU. The other 37 ms went to the stopper thread.
The scheduler kept trying to push taskA, the pinned head of the pushable
list, fell back to pushing taskB instead, and woke the stopper 5204
times. Every one of those pushes failed and no task was moved. taskA
stayed runnable and queued the whole time, and never ran.
Pushing taskB fails on a re-check. find_lock_lowest_rq() drops the rq
lock to take the target rq lock, then checks again with
"task != pick_next_pushable_task(rq)".
The task being pushed is taskB, but the pick returns taskA, the head of
the pushable list. taskB is rq->curr, and set_next_task_rt() removes the
running task from that list, so taskB can never be the head. The check
expects a candidate taken from the pushable list, but the fallback
pushes rq->curr, which is never on that list. So the check fails every
time.
.--> push-IPI arrives
| |
| v
| pushable head = taskA -> pinned, cannot be pushed
| |
| v
| so push taskB instead -> wake migration/N, a stop-class
| | thread, so it preempts taskB
| v
| re-check compares taskB against the pushable head,
| which is still taskA -> give up
| |
| v
| nothing moved, taskA still queued, rq still overloaded
| |
'----------'
repeats every ~17 us, 5204 times, for 89 ms
The loop cannot stop itself. Every round leaves the runqueue
exactly as it was, so the next push-IPI does the same thing. In
the capture it ended only when taskB went to sleep on its own.
taskA was then picked locally and left the pushable list.
CPU time per task in the window, from sched_switch:
taskB 51.95 ms real work
migration/N 37.18 ms nothing moved
taskA 0.00 ms queued the whole time, never picked
idle 0.01 ms
Counts over the same window:
7667 push-IPIs handled on this CPU
17481 pick_next_pushable_task() returned taskA, still pinned
5204 find_lock_lowest_rq() gave up on the re-check
1 push that actually completed
0 migrations of taskA
The CPU times and the window length come from the standard
sched_switch tracepoint. The counts needed tracepoints added inside
the RT balancer for this investigation.
The self-IPI path is closed by the rto_next_cpu() fix above, and that
part works. But the runqueue is still marked overloaded, because the
pinned task is still advertised as pushable. Other CPUs now send the
push-IPIs during their own RT balancing, and the same loop runs again.
Closing the self-IPI path did not stop a pinn
---truncated--- |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a Denial of Service (DoS) vulnerability exists in the BACnet stack's ReadPropertyMultiple (RPM) handler. When processing a malformed RPM request packet that lacks the expected closing tags, the function handler_read_property_multiple enters an infinite loop. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix infinite loop in layout state revocation
find_one_sb_stid() skips stids whose sc_status is non-zero, but the
SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status
before calling nfsd4_close_layout(). The retry loop therefore finds
the same layout stid on every iteration, hanging the revoker
indefinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: reject invalid CCM interval at configuration time
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink policy so userspace cannot set an invalid value.
- Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has
not yet been configured (defaults to 0 from kzalloc). |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in device certificate verification in nerves-hub nerves_hub_web allows an unauthenticated remote attacker to cause a denial of service via a TLS client certificate whose CA is not registered. When a client certificate chains to a root in the device endpoint's trust store but no CA in the chain is registered in NervesHub, NervesHub.SSL.decide/2 refuses it with the reason :unknown_ca. Erlang/OTP ssl reads that reason as a missing trust anchor, looks for an alternative root, finds the same root and validates again without end. The handshake process queries the database on each pass and keeps running after the client disconnects, until the node restarts.
The device endpoint trusts the public roots from CAStore unless DEVICE_SSL_CACERTFILE is set, so a client certificate from a public CA whose chain allows client authentication is sufficient. A chain that ends at a root outside the trust store is refused once.
This issue affects nerves_hub: from 1.0.0 before 2.5.4. |
| Uncontrolled Resource Consumption vulnerability in the sketch deserialization of Apache DataSketches Java.
Several deserializers trusted sizes and counts declared in the serialized input. A small crafted input could make an application allocate an excessive amount of memory, leading to an OutOfMemoryError. A crafted string passed to FrequentLongsSketch.getInstance(String) could also make deserialization, or a later update, loop indefinitely. Only applications that deserialize sketches from untrusted sources are affected.
This issue affects Apache DataSketches Java: through 9.0.0.
Users are recommended to upgrade to version 9.1.0, which fixes the issue. |
| An integer overflow vulnerability in the Qt QTextCodec fromUnicode() and toUnicode() functionality of the Qt 5 Core Compatibility APIs module (Qt 6) and the Qt Core module (Qt 5). Only builds where Qt is compiled with ICU support are affected. |
| Issue summary: Encrypting a CMS message to an EC certificate whose group order
is 1 may cause CMS_encrypt() or CMS_encrypt_ex() to loop indefinitely.
Impact summary: An attacker able to supply the recipient certificate to an
application performing CMS encryption can cause that application to loop
indefinitely, consuming CPU and resulting in Denial of Service.
CWE: CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop')
Description: CMS_encrypt() and CMS_encrypt_ex() encrypt a message to one or
more recipient certificates and, for an EC recipient, generate an ephemeral
key in the recipient's group. If the certificate declares a group order of 1,
random scalar generation can only produce zero. The key generation routine
then retries without limit while waiting for a nonzero private scalar, so the
call never returns.
The OpenSSL TLS and QUIC implementations do not use this path. An application
is exposed only if it calls CMS_encrypt() or CMS_encrypt_ex() with a recipient
certificate whose EC parameters are attacker-controlled. Certificates with
normal EC group orders do not trigger the loop.
OpenSSL 4.0 and later reject unknown explicit EC groups in default builds.
These versions are affected only when configured with the
enable-ec_explicit_curves option.
The result is a hang that consumes a CPU core until the process is
interrupted, a Denial of Service. The severity is Low because the attacker
must supply the recipient certificate and the application must choose to
encrypt to it; ordinary CMS encryption to trusted recipients is unaffected.
The fix makes EC key generation fail when the group has no valid nonzero
private scalar, instead of retrying indefinitely.
FIPS impact: no
The FIPS modules in 4.1, 4.0, 3.5 and 3.0 are not affected. The FIPS provider
does not support arbitrary explicit EC domain parameters, so an order-1 group
is rejected during key import before the vulnerable key generation path is
reached. |
| Loop with unreachable exit condition ('infinite loop') in the MigTD's GetQuote for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow a denial of service. System software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A flaw was found in dbus. A local attacker can exploit this vulnerability by connecting to an affected service, requesting a response, and stopping socket reads while keeping the connection open. Because the socket transport handles broken pipe write errors as retryable, the application enters a continuous retry loop. This can lead to excessive CPU consumption, resulting in a denial of service (DoS) for the target process. |
| In the NAS Authentication Request message decoding procedure, a missing lower bound check causes an infinite loop, leading to Denial of Service. |
| A loop with unreachable exit condition ('infinite loop') vulnerability in Fortinet FortiAuthenticator 8.0.0 through 8.0.3, FortiAuthenticator 6.6.0 through 6.6.10 may allow an attacker to cause a denial of service via crafted TCP requests. |
| Hickory DNS hickory-proto 0.25.0-alpha.3 through 0.25.2 and hickory-net before 0.26.1 contain an unbounded loop vulnerability in DnssecDnsHandle NSEC3 closest-encloser proof validation when the SOA owner is not an ancestor of the QNAME. Upstream attackers can return NoData or NXDomain responses with a cross-zone SOA record to panic debug builds or exhaust memory in release builds. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker
drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the
descriptor cursor by an attacker-supplied fip_dlen without ever
requiring dlen >= sizeof(struct fip_desc) in the default branch. The
named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked
their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor
(fip_dtype >= 128, which the standard requires receivers to silently
ignore) skipped that check entirely.
An unauthenticated L2 peer on the FCoE control VLAN could hang
fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely
by emitting one FIP CVL frame whose single descriptor had fip_dtype ==
FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes
per iteration and the loop condition rlen >= sizeof(*desc) stayed true
forever, blocking every subsequent FIP frame on that controller.
Tighten the outer dlen guard to also reject dlen < sizeof(struct
fip_desc), so a malformed descriptor whose length cannot even cover the
descriptor header is rejected before the switch. This is the same
lower-bound the named cases already apply and is the minimum scope that
closes the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: Prevent double migration of device pages
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0
---truncated--- |
| The Renesas RA SCI UART driver's receive-error ISR, uart_ra_sci_eri_isr() in drivers/serial/uart_renesas_ra_sci.c, acknowledged the error condition only when a Zephyr interrupt-driven callback had already been registered. With CONFIG_UART_INTERRUPT_DRIVEN=y and CONFIG_UART_ASYNC_API=n, if data->user_cb is NULL the ISR body is empty: the SCI error flags (SSR.ORER, SSR.FER, SSR.PER) are left set and the ICU event flag R_ICU->IELSR_b[eri_irq].IR is never cleared, so the interrupt re-pends immediately and the ISR is re-entered without end.
The error interrupt is masked at boot by uart_ra_sci_init(), but FSP's R_SCI_UART_Open() unconditionally re-enables it, and uart_ra_sci_configure() - the back end of the public uart_configure() API, enabled by default via CONFIG_UART_USE_RUNTIME_CONFIGURE - performs a Close()/Open() pair without re-masking it. Any runtime uart_configure() therefore leaves the error interrupt live regardless of whether a callback has been set, as does calling uart_irq_err_enable() on its own. An instance used with the polling API, or the window between uart_configure() and uart_irq_callback_user_data_set(), thus runs with the error interrupt unmasked and no callback registered.
The trigger is an ordinary receive line error - overrun, framing, parity, or a break condition - which is fully determined by the device attached to the serial link. A peer able to assert a break or transmit at a mismatched baud rate produces such an error at will, so a single frame is enough to enter the state.
The impact is availability only: the CPU is captured in the re-entering ISR and never returns to thread context, hanging the entire system until an external reset or hardware watchdog fires. There is no memory corruption or information disclosure. Builds using the asynchronous UART API are unaffected, because the fall-through to FSP's sci_uart_eri_isr() clears both the error flags and the pending IRQ. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix packet loop on netem when duplicate is on
When netem duplicates a packet it re-enqueues the copy at the root qdisc.
If another netem sits in the tree the copy can be duplicated
again, recursing until the stack or memory is exhausted.
The original duplication guard temporarily zeroed q->duplicate around
the re-enqueue, but that does not cover all cases because it is
per-qdisc state shared across all concurrent enqueue paths
and is not safe without additional locking.
Use the skb tc_depth field introduced in an earlier patch:
- increment it on the duplicate before re-enqueue
- skip duplication for any skb whose tc_depth is already non-zero.
This marks the packet itself rather than mutating qdisc state,
therefore it is safe regardless of tree topology or concurrency. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
When mirred redirects to ingress (from either ingress or egress) the loop
state from sched_mirred_dev array dev is lost because of 1) the packet
deferral into the backlog and 2) the fact the sched_mirred_dev array is
cleared. In such cases, if there was a loop we won't discover it.
Here's a simple test to reproduce:
ip a add dev port0 10.10.10.11/24
tc qdisc add dev port0 clsact
tc filter add dev port0 egress protocol ip \
prio 10 matchall action mirred ingress redirect dev port1
tc qdisc add dev port1 clsact
tc filter add dev port1 ingress protocol ip \
prio 10 matchall action mirred egress redirect dev port0
ping -c 1 -W0.01 10.10.10.10 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in rt6_fill_node()
Sashiko reported this issue [1]. Apply the same fix as
commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings)
without waiting for RCU readers; rt->fib6_siblings.next then still
points into the old ring and this softirq-side walker never reaches
&rt->fib6_siblings, causing a CPU stall. fib6_del_route() always
WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an
inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev |