| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
efi/libstub: Free correct pointer on failure
cmdline_ptr is an out parameter, which is not allocated by the function
itself, and likely points into the caller's stack.
cmdline refers to the pool allocation that should be freed when cleaning
up after a failure, so pass this instead to free_pool(). |
| In the Linux kernel, the following vulnerability has been resolved:
bluetooth/hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX
Syzbot hit warning in hci_conn_del() caused by freeing handle that was
not allocated using ida allocator.
This is caused by handle bigger than HCI_CONN_HANDLE_MAX passed by
hci_le_big_sync_established_evt(), which makes code think it's unset
connection.
Add same check for handle upper bound as in hci_conn_set_handle() to
prevent warning. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: make __free(kfree) accept error pointers
Currently, if an automatically freed allocation is an error pointer that
will lead to a crash. An example of this is in wm831x_gpio_dbg_show().
171 char *label __free(kfree) = gpiochip_dup_line_label(chip, i);
172 if (IS_ERR(label)) {
173 dev_err(wm831x->dev, "Failed to duplicate label\n");
174 continue;
175 }
The auto clean up function should check for error pointers as well,
otherwise we're going to keep hitting issues like this. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
ftrace_startup does not remove ops from ftrace_ops_list when
ftrace_startup_enable fails:
register_ftrace_function
ftrace_startup
__register_ftrace_function
...
add_ftrace_ops(&ftrace_ops_list, ops)
...
...
ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1
...
return 0 // ops is in the ftrace_ops_list.
When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything:
unregister_ftrace_function
ftrace_shutdown
if (unlikely(ftrace_disabled))
return -ENODEV; // return here, __unregister_ftrace_function is not executed,
// as a result, ops is still in the ftrace_ops_list
__unregister_ftrace_function
...
If ops is dynamically allocated, it will be free later, in this case,
is_ftrace_trampoline accesses NULL pointer:
is_ftrace_trampoline
ftrace_ops_trampoline
do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL!
Syzkaller reports as follows:
[ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b
[ 1203.508039] #PF: supervisor read access in kernel mode
[ 1203.508798] #PF: error_code(0x0000) - not-present page
[ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0
[ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI
[ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8
[ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0
[ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00
[ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246
[ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866
[ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b
[ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07
[ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399
[ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008
[ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000
[ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0
[ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Therefore, when ftrace_startup_enable fails, we need to rollback registration
process and remove ops from ftrace_ops_list. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix crash during module load unload test
During purex packet handling the driver was incorrectly freeing a
pre-allocated structure. Fix this by skipping that entry.
System crashed with the following stack during a module unload test.
Call Trace:
sbitmap_init_node+0x7f/0x1e0
sbitmap_queue_init_node+0x24/0x150
blk_mq_init_bitmaps+0x3d/0xa0
blk_mq_init_tags+0x68/0x90
blk_mq_alloc_map_and_rqs+0x44/0x120
blk_mq_alloc_set_map_and_rqs+0x63/0x150
blk_mq_alloc_tag_set+0x11b/0x230
scsi_add_host_with_dma.cold+0x3f/0x245
qla2x00_probe_one+0xd5a/0x1b80 [qla2xxx]
Call Trace with slub_debug and debug kernel:
kasan_report_invalid_free+0x50/0x80
__kasan_slab_free+0x137/0x150
slab_free_freelist_hook+0xc6/0x190
kfree+0xe8/0x2e0
qla2x00_free_device+0x3bb/0x5d0 [qla2xxx]
qla2x00_remove_one+0x668/0xcf0 [qla2xxx] |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: pcc: fix use-after-free and double free in _OSC evaluation
pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the
two-phase _OSC negotiation. Between the two calls it freed
output.pointer but left output.length unchanged. Since
acpi_evaluate_object() treats a non-zero length with a non-NULL
pointer as an existing buffer to write into, the second call wrote
into freed memory (use-after-free). The subsequent kfree(output.pointer)
at out_free then freed the same pointer a second time (double free).
Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER
after freeing the first result, so ACPICA allocates a fresh buffer for
each phase independently. |
| A Double Free vulnerability in open-iscsi allows an unauthenticated MITM attacker to cause DoS.
This issue affects open-iscsi: from ? through 56718d4e9d1a4f51c30697b5c0534144bb41c9bb. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete
KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s
hlist_del_rcu calls under syzkaller load on linux-6.12.y stable
(reproduced on 6.12.47, also reachable via the same code path on
torvalds/master and on the ipsec tree). Nine unique signatures cluster
in the xfrm_state lifecycle, the load-bearing one being:
BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline]
BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline]
BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c
Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435
Workqueue: netns cleanup_net
Call Trace:
__hlist_del / hlist_del_rcu
__xfrm_state_delete
xfrm_state_delete
xfrm_state_flush
xfrm_state_fini
ops_exit_list
cleanup_net
The other observed signatures hit the same slab object from
__xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB
write variant of __xfrm_state_delete, all on the byseq/byspi
hash chains.
__xfrm_state_delete() guards its byseq and byspi unhashes with
value-based predicates:
if (x->km.seq)
hlist_del_rcu(&x->byseq);
if (x->id.spi)
hlist_del_rcu(&x->byspi);
while everywhere else in the file (e.g. state_cache, state_cache_input)
the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets
x->id.spi = newspi inside xfrm_state_lock and then immediately inserts
into byspi, but a path that observes x->id.spi != 0 outside of
xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently
with whether x is actually on the list. The same holds for x->km.seq
versus byseq, and the bydst/bysrc unhashes have no predicate at all,
so a second __xfrm_state_delete() on the same object writes through
LIST_POISON pprev.
The defensive change here:
- Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst,
bysrc, byseq and byspi so a second deletion is a no-op rather
than a write through LIST_POISON pprev. The byseq/byspi nodes
are already initialised in xfrm_state_alloc().
- Test hlist_unhashed() rather than the value predicate for
byseq/byspi, so the unhash decision tracks list state rather than
mutable scalar fields.
Empirical verification: applied this patch on top of v6.12.47, rebuilt,
and re-ran the same syzkaller harness for 1h16m on a previously-crashy
configuration that produced ~100 hits each of slab-use-after-free
Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in
__xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at
~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo
confirms the xfrm_state slab is actively allocated and freed during
the run (~143 KiB resident), so the fuzzer is still exercising those
code paths -- they just no longer crash.
Reproduction:
- Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV
- syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db
- 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal
- 9 unique signatures collected in ~9h, all within xfrm_state
lifecycle |
| When initializing an RSA public key from DER or PEM bytes throws an error, the EVP_PKEY* is double-freed: first in the catch block, then in the deinit. This can lead to a crash on future memory allocations. This double-free manifests when BoringSSL cannot decode the public key from the bytes provided. This vulnerability is addressed in swift-crypto version 4.5.1. |
| We are aware that exploit code for this is public however we are not aware of any attacks in the wild abusing this flaw. This vulnerability was fixed in Firefox 152.0.6, Firefox ESR 140.13, and Thunderbird 140.13. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: use kvfree() for replaced sysctl write buffer
proc_sys_call_handler() allocates its temporary sysctl buffer with
kvzalloc() and passes it to __cgroup_bpf_run_filter_sysctl(). Since
kvzalloc() may fall back to vmalloc() for large allocations, freeing
that buffer with kfree() is wrong and can corrupt memory.
Use kvfree() to safely handle both kmalloc and kvzalloc()/vmalloc
allocations.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc5.
Reproduced the bug based on v7.1-rc4 in a QEMU x86_64 guest booted with
KASAN and CONFIG_FAILSLAB enabled. To exercise the replacement path, the
test tree also included the accompanying fix for the stale ret == 1
check in __cgroup_bpf_run_filter_sysctl(). The reproducer confines
failslab injections to the proc_sys_call_handler() range, uses
stacktrace-depth=32, and injects fail-nth=1 while writing 8191 bytes to
/proc/sys/kernel/domainname from a task in the target cgroup. Under
that setup, fail-nth=1 triggered the fault:
BUG: unable to handle page fault for address: ffffeb0200024d48
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 SMP KASAN NOPTI
CPU: 2 UID: 0 PID: 209 Comm: repro_proc_sys_ Not tainted 7.1.0-rc4-00686-g97625979a5d4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:kfree+0x6e/0x510
...
Call Trace:
<TASK>
? __cgroup_bpf_run_filter_sysctl+0x626/0xc30
__cgroup_bpf_run_filter_sysctl+0x74d/0xc30
? __pfx___cgroup_bpf_run_filter_sysctl+0x10/0x10
? srso_return_thunk+0x5/0x5f
? __kvmalloc_node_noprof+0x345/0x870
? proc_sys_call_handler+0x250/0x480
? srso_return_thunk+0x5/0x5f
proc_sys_call_handler+0x3a2/0x480
? __pfx_proc_sys_call_handler+0x10/0x10
? srso_return_thunk+0x5/0x5f
? selinux_file_permission+0x39f/0x500
? srso_return_thunk+0x5/0x5f
? lock_is_held_type+0x9e/0x120
vfs_write+0x98e/0x1000
...
</TASK>
With this fix applied on top of the same test setup, rerunning the
reproducer with fail-nth=1 yields no corresponding Oops reports. |
| FastTube 1.0.1.0 contains a denial of service vulnerability that allows local attackers to crash the application by submitting an excessively long string to the search functionality. Attackers can paste a buffer of 1900 characters into the search bar and trigger a crash when the search operation is executed. |
| When the application opens a PDF file and JavaScript writes annotation attributes, there is a lack of sufficient object type and argument checks. As a result, due to the damage to the internal structure of the annotations, it causes the application to crash during subsequent release. |
| Mismatched Memory Management Routines vulnerability in Apache Thrift c_glib language bindings.
This issue affects Apache Thrift: before 0.23.0.
Users are recommended to upgrade to version 0.23.0, which fixes the issue.
Description: Specially crafted requests can crash an c_glib-based Thrift server with a clean but fatal "free(): invalid pointer" error message. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: refill RX buffers before XDP or skb use
The RX error path returns the current descriptor buffer to the hardware
BM pool. That is only valid while the driver still owns the buffer.
mvpp2_rx_refill() can fail after the current buffer has been handed to
XDP or attached to an skb. In those cases mvpp2_run_xdp() may have
recycled, redirected, or queued the page for XDP_TX, and an skb free also
retires the data buffer. Returning such a buffer to BM lets hardware DMA
into memory that is no longer owned by the RX ring.
Refill the BM pool before handing the current buffer to XDP or to the
skb. If the allocation fails there, drop the packet and return the
still-owned current buffer to BM, preserving the pool depth. Once the
refill succeeds, later local drops retire/free the current buffer instead
of returning it to BM. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix double-free in tipc_buf_append()
tipc_msg_validate() can potentially reallocate the skb it is validating,
freeing the old one. In tipc_buf_append(), it was being called with a
pointer to a local variable which was a copy of the caller's skb
pointer.
If the skb was reallocated and validation subsequently failed, the error
handling path would free the original skb pointer, which had already
been freed, leading to double-free.
Fix this by checking if head now points to a newly allocated reassembled
skb. If it does, reassign *headbuf for later freeing operations. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: renesas: Fix memory leak in renesas_i3c_i3c_xfers()
The xfer structure allocated by renesas_i3c_alloc_xfer() was never freed
in the renesas_i3c_i3c_xfers() function. Use the __free(kfree) cleanup
attribute to automatically free the memory when the variable goes out of
scope. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix possible kfree_skb of ERR_PTR
After the patch in the "Fixes" tag, the allocation of the "reply" skb
can happen either before or after locking the ovs_mutex.
However, error cleanups still follow the classical reversed order,
assuming "reply" is allocated before locking: it is freed after unlocking.
If "reply" allocation happens after locking the mutex and it fails,
"reply" is left with an ERR_PTR, and execution jumps to the correspondent
cleanup stage which will try to free an invalid pointer.
Fix this by setting the pointer to NULL after having saved its error
value. |
| In the Linux kernel, the following vulnerability has been resolved:
tun: free page on short-frame rejection in tun_xdp_one()
tun_xdp_one() returns -EINVAL on a frame shorter than ETH_HLEN without
freeing the page that vhost_net_build_xdp() allocated for it.
tun_sendmsg() discards that -EINVAL and still returns total_len, so
vhost_tx_batch() takes the success path and never frees the page; each
short frame in a batch leaks one page-frag chunk.
A local process that can open /dev/net/tun and /dev/vhost-net can hit
this path: it attaches a tun/tap device as the vhost-net backend and
feeds TX descriptors whose length minus the virtio-net header is below
ETH_HLEN. Each kick leaks the page-frag chunks for that batch, and a
tight submission loop exhausts host memory and triggers an OOM panic.
Free the page before returning -EINVAL, matching the XDP-program error
path in the same function. |
