Total
28 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-45157 | 1 Arm | 1 Mbed Tls | 2025-03-14 | 5.1 Medium |
| An issue was discovered in Mbed TLS before 2.28.9 and 3.x before 3.6.1, in which the user-selected algorithm is not used. Unlike previously documented, enabling MBEDTLS_PSA_HMAC_DRBG_MD_TYPE does not cause the PSA subsystem to use HMAC_DRBG: it uses HMAC_DRBG only when MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG and MBEDTLS_CTR_DRBG_C are disabled. | ||||
| CVE-2024-30389 | 1 Juniper | 18 Ex4300, Ex4300-24p, Ex4300-24p-s and 15 more | 2025-02-06 | 5.8 Medium |
| An Incorrect Behavior Order vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on EX4300 Series allows an unauthenticated, network-based attacker to cause an integrity impact to networks downstream of the vulnerable device. When an output firewall filter is applied to an interface it doesn't recognize matching packets but permits any traffic. This issue affects Junos OS 21.4 releases from 21.4R1 earlier than 21.4R3-S6. This issue does not affect Junos OS releases earlier than 21.4R1. | ||||
| CVE-2024-30410 | 1 Juniper | 18 Ex4300, Ex4300-24p, Ex4300-24p-s and 15 more | 2025-02-06 | 5.8 Medium |
| An Incorrect Behavior Order in the routing engine (RE) of Juniper Networks Junos OS on EX4300 Series allows traffic intended to the device to reach the RE instead of being discarded when the discard term is set in loopback (lo0) interface. The intended function is that the lo0 firewall filter takes precedence over the revenue interface firewall filter. This issue affects only IPv6 firewall filter. This issue only affects the EX4300 switch. No other products or platforms are affected by this vulnerability. This issue affects Juniper Networks Junos OS: * All versions before 20.4R3-S10, * from 21.2 before 21.2R3-S7, * from 21.4 before 21.4R3-S6. | ||||
| CVE-2023-44386 | 1 Vapor | 1 Vapor | 2024-11-21 | 5.3 Medium |
| Vapor is an HTTP web framework for Swift. There is a denial of service vulnerability impacting all users of affected versions of Vapor. The HTTP1 error handler closed connections when HTTP parse errors occur instead of passing them on. The issue is fixed as of Vapor release 4.84.2. | ||||
| CVE-2023-33224 | 1 Solarwinds | 1 Solarwinds Platform | 2024-11-21 | 7.2 High |
| The SolarWinds Platform was susceptible to the Incorrect Behavior Order Vulnerability. This vulnerability allows users with administrative access to SolarWinds Web Console to execute arbitrary commands with NETWORK SERVICE privileges. | ||||
| CVE-2023-23576 | 1 Gallagher | 1 Command Centre | 2024-11-21 | 4.3 Medium |
| Incorrect behavior order in the Command Centre Server could allow privileged users to gain physical access to the site for longer than intended after a network outage when competencies are used in the access decision. This issue affects: Gallagher Command Centre: 8.90 prior to vEL8.90.1620 (MR2), 8.80 prior to vEL8.80.1369 (MR3), 8.70 prior to vEL8.70.2375 (MR5), 8.60 prior to vEL8.60.2550 (MR7), all versions of 8.50 and prior. | ||||
| CVE-2021-31379 | 1 Juniper | 18 Junos, Mx10, Mx10000 and 15 more | 2024-11-21 | 7.5 High |
| An Incorrect Behavior Order vulnerability in the MAP-E automatic tunneling mechanism of Juniper Networks Junos OS allows an attacker to send certain malformed IPv4 or IPv6 packets to cause a Denial of Service (DoS) to the PFE on the device which is disabled as a result of the processing of these packets. Continued receipt and processing of these malformed IPv4 or IPv6 packets will create a sustained Denial of Service (DoS) condition. This issue only affects MPC 7/8/9/10/11 cards, when MAP-E IP reassembly is enabled on these cards. An indicator of compromise is the output: FPC ["FPC ID" # e.g. "0"] PFE #{PFE ID # e.g. "1"] : Fabric Disabled Example: FPC 0 PFE #1 : Fabric Disabled when using the command: show chassis fabric fpcs An example of a healthy result of the command use would be: user@device-re1> show chassis fabric fpcs Fabric management FPC state: FPC 0 PFE #0 Plane 0: Plane enabled Plane 1: Plane enabled Plane 2: Plane enabled Plane 3: Plane enabled Plane 4: Plane enabled Plane 5: Plane enabled Plane 6: Plane enabled Plane 7: Plane enabled This issue affects: Juniper Networks Junos OS on MX Series with MPC 7/8/9/10/11 cards, when MAP-E IP reassembly is enabled on these cards. 17.2 version 17.2R1 and later versions; 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R2-S6, 18.2R3-S3; 18.3 versions prior to 18.3R2-S4, 18.3R3-S1; 18.4 versions prior to 18.4R1-S8, 18.4R2-S5, 18.4R3; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S5, 19.3R3. This issue does not affect Juniper Networks Junos OS versions prior to 17.2R1. | ||||
| CVE-2024-24853 | 1 Intel | 1 Processor | 2024-08-16 | 7.2 High |
| Incorrect behavior order in transition between executive monitor and SMI transfer monitor (STM) in some Intel(R) Processor may allow a privileged user to potentially enable escalation of privilege via local access. | ||||