| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| LibreOffice Calc compiles cell formulas when opening a spreadsheet. A heap buffer overflow existed when compiling a very long formula made up of many opening tokens. The array that tracks nesting depth was allocated one element too small for that worst case, so such a formula wrote one element past its end. In fixed versions the array is sized to hold the largest possible nesting. |
| Incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 152, Firefox ESR 140.12, Thunderbird 152, and Thunderbird 140.12. |
| Incorrect boundary conditions in the Internationalization component. This vulnerability was fixed in Firefox ESR 140.12, Firefox ESR 115.37, and Thunderbird 140.12. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umad: Reject negative data_len in ib_umad_write
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data()
Fix two bugs in pt5161l_read_block_data():
1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24],
but i2c_smbus_read_block_data() can return up to
I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into
the caller's buffer before the return value can be checked, so
the post-read length validation does not prevent a stack overrun
if a device returns more than 24 bytes. Resize the buffer to
I2C_SMBUS_BLOCK_MAX.
2. Unexpected positive return on length mismatch: When all three
retries are exhausted because the device returns data with an
unexpected length, i2c_smbus_read_block_data() returns a positive
byte count. The function returns this directly, and callers treat
any non-negative return as success, processing stale or incomplete
buffer contents. Return -EIO when retries are exhausted with a
positive return value, preserving the negative error code on I2C
failure. |
| LibreOffice can import presentations in the legacy binary PPT format. A stack buffer overflow existed when importing a colour-replacement record. Two fixed-size colour tables were filled from the file, but the write position was not reset between the two passes over the record, so a file whose combined colour counts exceeded the table size wrote past the end of the tables on the stack. In fixed versions the unused second pass is no longer read into those tables. |
| Issue summary: When CMS password-based decryption (RFC 3211 / PWRI key unwrap)
processes attacker-supplied CMS data, an attacker-chosen stream-mode KEK
cipher can trigger a heap out-of-bounds read in kek_unwrap_key().
Impact summary: A heap buffer over-read may trigger a crash which leads to
Denial of Service for an application if the input buffer ends at a memory
page boundary and the following page is unmapped. There is no information
disclosure as the over-read bytes are not revealed to the attacker.
The key unwrapping function performs a check-byte test as specified in the
RFC that reads 7 bytes from a heap allocation that is based on the wrapped
key length from the message. There is a minimum length check based on the
block length of the wrapping cipher. However the cipher is selected from
an OID carried in the attacker's PWRI keyEncryptionAlgorithm with no
requirement that the cipher be a block cipher. When an attacker selects
a stream-mode cipher the guard will be ineffective and the allocated buffer
containing the unwrapped key can be too small to fit the check-bytes
specified in the RFC and a buffer over-read can happen.
Applications calling CMS_decrypt() or CMS_decrypt_set1_password()
(equivalently openssl cms -decrypt -pwri_password ...) on untrusted CMS
data are vulnerable to this issue. No password knowledge is required: the
over-read happens during the unwrap attempt before any authentication
succeeds.
The over-read is limited to a few bytes and is not written to output, so
there is no information disclosure. Triggering a crash requires the
allocation to border unmapped memory, which is unlikely with the normal
allocator.
The FIPS modules are not affected by this issue. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-23, when using LZMA compression in the MIFF encoder an out of bounds write can occur due to a missing check. This issue has been patched in versions 6.9.13-48 and 7.1.2-23. |
| lldpd is an implementation of IEEE 802.1ab (LLDP). Prior to version 1.0.22, lldpd_decode() in src/daemon/lldpd.c strips 802.1Q VLAN tags from received Ethernet frames by calling memmove() to shift the frame payload 4 bytes left. The third argument (byte count) is s - 2 * ETHER_ADDR_LEN but should be s - 2 * ETHER_ADDR_LEN - 4, causing a 4-byte heap buffer over-read past the malloc(h_mtu) allocation when the received frame size equals the interface MTU. This issue has been patched in version 1.0.22. |
| GIMP HDR File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of HDR files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28618. |
| An incorrect buffer size calculation in the epoch key generator in OpenVPN ovpn-dco-win version 2.0.0 through 2.8.3 allows a remote authenticated peer to trigger a heap-based buffer overflow and kernel memory corruption via a crafted data packet, resulting in a system crash (denial of service). |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: xbox_remote: heed DMA restrictions
The buffer for IO must not be part of the device structure
because that violates the DMA coherency rules. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Add bounds checking to ib_{get,set}_value
The uvd/vce/vcn code accesses the IB at predefined offsets without
checking that the IB is large enough. Check the bounds here. The caller
is responsible for making sure it can handle arbitrary return values.
Also make the idx a uint32_t to prevent overflows causing the condition
to fail. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.11.1, the mod_verto HTTP request handler allocates a fixed 2 MiB buffer for a POST application/x-www-form-urlencoded body but accepts Content-Length up to just under 10 MiB. The body-read loop is bounded by Content-Length rather than the buffer size, producing an attacker-controlled heap overflow of up to ~8 MiB -- before the HTTP basic-auth check runs. This issue has been patched in version 1.11.1. |
| Heap buffer overflow in Video in Google Chrome prior to 149.0.7827.53 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
clk: microchip: mpfs-ccc: fix out of bounds access during output registration
UBSAN reported an out of bounds access during registration of the last
two outputs. This out of bounds access occurs because space is only
allocated in the hws array for two PLLs and the four output dividers
that each has, but the defined IDs contain two DLLS and their two
outputs each, which are not supported by the driver. The ID order is
PLLs -> DLLs -> PLL outputs -> DLL outputs. Decrement the PLL output IDs
by two while adding them to the array to avoid the problem. |
| Incorrect boundary conditions in the Graphics: Text component. This vulnerability was fixed in Firefox 151.0.3. |
| Heap buffer overflow in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix slab-out-of-bounds access in auth message processing
If a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLY
contains a positive value in its result field, it is treated as an
error code by ceph_handle_auth_reply() and returned to
handle_auth_reply(). Thereafter, an attempt is made to send the
preallocated message of type CEPH_MSG_AUTH, where the returned value is
interpreted as the size of the front segment to send. If the result
value in the message is greater than the size of the memory buffer
allocated for the front segment, an out-of-bounds access occurs, and
the content of the memory region beyond this buffer is sent out.
This patch fixes the issue by treating only negative values in the
result field as errors. Positive values are therefore treated as success
in the same way as a zero value. Additionally, a BUG_ON is added to
__send_prepared_auth_request() comparing the len parameter to
front_alloc_len to prevent sending the message if it exceeds the bounds
of the allocation and to make it easier to catch any logic flaws leading
to this. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: cap upcall PID array size and pre-size vport replies
The vport netlink reply helpers allocate a fixed-size skb with
nlmsg_new(NLMSG_DEFAULT_SIZE, ...) but serialize the full upcall PID
array via ovs_vport_get_upcall_portids(). Since
ovs_vport_set_upcall_portids() accepts any non-zero multiple of
sizeof(u32) with no upper bound, a CAP_NET_ADMIN user can install a PID
array large enough to overflow the reply buffer, causing nla_put() to
fail with -EMSGSIZE and hitting BUG_ON(err < 0). On systems with
unprivileged user namespaces enabled (e.g., Ubuntu default), this is
reachable via unshare -Urn since OVS vport mutation operations use
GENL_UNS_ADMIN_PERM.
kernel BUG at net/openvswitch/datapath.c:2414!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 1 UID: 0 PID: 65 Comm: poc Not tainted 7.0.0-rc7-00195-geb216e422044 #1
RIP: 0010:ovs_vport_cmd_set+0x34c/0x400
Call Trace:
<TASK>
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1116)
genl_rcv_msg (net/netlink/genetlink.c:1194)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Kernel panic - not syncing: Fatal exception
Reject attempts to set more PIDs than nr_cpu_ids in
ovs_vport_set_upcall_portids(), and pre-compute the worst-case reply
size in ovs_vport_cmd_msg_size() based on that bound, similar to the
existing ovs_dp_cmd_msg_size(). nr_cpu_ids matches the cap already
used by the per-CPU dispatch configuration on the datapath side
(ovs_dp_cmd_fill_info() serialises at most nr_cpu_ids PIDs), so the
two sides stay consistent. |
