| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0, When a binding is created on an x-jms-topic exchange, add_binding/3 reads the rjms_erlang_selector argument and passes it through erl_scan:string/1 then erl_parse:parse_term/1. erl_scan:string/1 interns every atom literal it tokenizes. validate_binding/2 is a no-op (-> ok.), there is no length cap, and the surrounding try/catch cannot reclaim atoms. The Java JMS client compiles selectors client-side, but the server does not enforce this , a raw AMQP client can send arbitrary selector strings. An authenticated low-privilege AMQP user confined to one vhost can crash the entire broker node (cross-tenant DoS) in <100 bind calls. Preconditions include rabbitmq_jms_topic_exchange plugin enabled (bundled; required for any JMS deployment) Authenticated AMQP user with read on an x-jms-topic exchange + write on a queue (or configure to declare both). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, When no CA bundle is available, ssl_options/1 falls back to [{verify, verify_none}] with no warning. An attacker in a man-in-the-middle position can forge the JWKS response, which leads the broker to accept arbitrary JWTs. Preconditions include The OAuth2 plugin must be in use with no cacertfile configured and the OS CA bundle empty or unreadable (for example, in a minimal container), and the attacker must hold a network man-in-the-middle position.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, get_chunk_selector/1 calls binary_to_atom on the raw client-supplied <<"chunk_selector">> property from post-auth subscribe and resolve_offset_spec frames, with no whitelist and no existing guard. An authenticated stream client with read access to any stream can crash the broker node. Preconditions include rabbitmq_stream plugin enabled Authenticated stream-protocol user with read access to at least one stream. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.17, 4.0.22, 4.1.13, and 4.2.6, match_origin/1 returned the bare reflected Origin and allowed credentials even when the wildcard "" was configured, so the response echoed the attacker's origin together with Access-Control-Allow-Credentials. The affected code is rabbit_mgmt_cors.erl. When the management plugin is configured with a wildcard CORS origin (cors_allow_origins = ""), the handler reflects the request Origin back in Access-Control-Allow-Origin and also sends Access-Control-Allow-Credentials: true. A malicious web page that a signed-in administrator visits can then use that administrator's cached HTTP Basic credentials to issue authenticated, state-changing requests to the management API. Preconditions include The management plugin is configured with the wildcard cors_allow_origins = "*", which is an explicit operator misconfiguration A target administrator has a cached HTTP Basic-auth session in the browser. This issue is fixed in versions 3.13.17, 4.0.22, 4.1.13, and 4.2.6. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.1.13, 4.2.7, and 4.3.0, is_authorized/2 uses is_authorized_monitor for all methods. DELETE resets rabbit_core_metrics:reset_auth_attempt_metrics(). Impact is cosmetic (counters only, no log erasure), but inconsistent with rabbit_mgmt_wm_reset.erl which requires admin for the analogous operation. A monitoring-tagged user can reset the per-node authentication-attempt counters via DELETE /api/auth/attempts/:node, erasing evidence of brute-force activity. The sibling endpoint wm_reset requires administrator. Preconditions include Management plugin enabled monitoring tag. This issue is fixed in versions 4.1.13, 4.2.7, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, add_binding/3 parses the routing key as an integer weight N and computes ring positions with lists:seq(NextN0, NextN0 + N - 1). validate_binding/2 only checks N >= 1 , no upper bound. The resulting list is stored in the exchange's Khepri record, replicated cluster-wide, and reloaded on restart. A user with write permission on a consistent-hash exchange and read on a queue can create a binding whose routing key (the hash-ring weight) is an arbitrarily large integer. The broker allocates a list of that many integers via lists:seq/2 and persists it to Khepri across all cluster nodes , a single binding with weight 100000000 allocates ~800 MB on every node and survives restarts. Preconditions include rabbitmq_consistent_hash_exchange plugin enabled write permission on a consistent-hash exchange + read on a queue (standard binding perms). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.34.0, AMQConnection.start() applies Math.min(maxInboundMessageBodySize, frameMax) after Connection.Tune negotiation even though AMQP defines frameMax value zero as unlimited and ConnectionFactory.DEFAULT_FRAME_MAX is zero. When the client default and server-negotiated value are both zero, the result is passed to Utils.framePayloadLimit(int), which interprets zero as Integer.MAX_VALUE and disables the configured maxInboundMessageBodySize cap. A malicious AMQP server, or a man-in-the-middle attacker able to modify Connection.Tune and inject frames into the connection, can then send an oversized frame of any frame type, causing Frame.readFrom() to allocate a large byte array before content-level validation and potentially terminate the client process through memory exhaustion. This issue is fixed in version 5.34.0. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, Channel.dispatch in channel.go, confirms.confirm in confirms.go, and Connection.dispatch0 in connection.go synchronously send publisher confirmations, flow-control events, consumer cancellations, returned messages, including NotifyConfirm events and connection block notifications, to application-provided channels. If a listener channel is unbuffered, full, or not drained promptly, the sole reader goroutine blocks and stops processing frames, acknowledgments, deliveries, and heartbeats. Broker-driven event bursts can therefore cause connection stalls, missed heartbeats, deadlocks, and disconnection. This issue is fixed in version 1.13.0. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, tlsConfigFromURI in uri.go creates tls.Config values without setting MinVersion to tls.VersionTLS12. Builds using a Go runtime whose default permits TLS 1.0 or TLS 1.1 can therefore negotiate an obsolete protocol version when connecting through an amqps URI. A network attacker able to influence TLS negotiation with such a legacy build may weaken transport protection for AMQP messages and credentials. This issue is fixed in version 1.13.0. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, readField in read.go reads the length of an AMQP byte-array field with type tag x into a signed int32 and passes the value directly to make when allocating the field buffer. A malicious or compromised broker can encode a value such as 0xFFFFFFFF, which becomes -1 and causes a len out of range runtime panic. The panic escapes the network reader goroutine and terminates the client process, including during connection.start server properties or message header table parsing. This issue is fixed in version 1.13.0. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, readLongstr in read.go returns an empty string and a nil error when a declared AMQP longstr length exceeds 0x7FFFFFFF instead of returning ErrSyntax. The function leaves the declared field bytes unread, while readTable treats the operation as successful and continues parsing from the wrong offset. A malicious or compromised broker can provide an oversized longstr in a table field and desynchronize subsequent AMQP parsing, causing attacker-controlled trailing bytes to be interpreted as later fields or frames and disrupting connection integrity and availability. This issue is fixed in version 1.13.0. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, Channel.Qos in channel.go accepts negative prefetchCount and prefetchSize integers and casts them directly to uint16 and uint32 fields in the basic.qos method because validateQos is absent. Values such as -1 therefore wrap to 65535 or 4294967295 instead of being rejected. An application that permits untrusted configuration of these Qos values can unintentionally request extremely large prefetch limits, allowing a broker to deliver enough queued messages to exhaust client memory and disrupt processing. This issue is fixed in version 1.13.0. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, the writeShortstr function in write.go casts the byte length of AMQP shortstr property values to uint8 without first rejecting values longer than 255 bytes. An application that accepts an oversized CorrelationId, ReplyTo, MessageId, Expiration, UserId, AppId, ContentType, ContentEncoding, or Type value can therefore serialize a wrapped length and only a truncated prefix, while reporting no error. The resulting silent metadata corruption can break request and reply correlation, routing, tracing, and downstream message processing. This issue is fixed in version 1.13.0. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, PlainAuth values defined in auth.go retain passwords as exported plaintext fields in Connection.Config.SASL after a successful PLAIN authentication handshake. The Connection.openComplete method in connection.go does not clear those values. Code with access to the Connection object, including reflective loggers, application performance monitoring agents, debugging utilities, and panic handlers, can traverse the configuration and expose the credentials to logs or state captures. The credential remains available for the lifetime of the connection instead of being cleared after authentication. This issue is fixed in version 1.13.0. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, Connection.openTune in connection.go accepts a server-advertised FrameMax below the AMQP frameMinSize value of 4096 bytes because the connection negotiation loop does not enforce the protocol minimum. A malicious or compromised AMQP broker can therefore advertise an extremely small FrameMax, causing later client publications to be fragmented into excessive numbers of frames and write operations. This can consume CPU and stall the client or its host. This issue is fixed in version 1.13.0. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, Channel.recvContent in channel.go preallocates the message body slice with the uint64 ch.header.Size value supplied by an AMQP content header without capping the allocation to the negotiated Connection.Config.FrameSize value. A malicious or compromised broker can send an extreme declared body size and cause the Go runtime to attempt a correspondingly large allocation before body data is received. The allocation can exhaust memory and terminate the client process. This issue is fixed in version 1.13.0. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, URI.String in uri.go concatenates CertFile, KeyFile, CACertFile, and ServerName values directly into an AMQPS query string instead of encoding them as URL query parameters with url.Values. If an application accepts a TLS asset path containing ampersand or equals delimiters and later reparses the serialized URI with ParseURI, the embedded delimiters can create or overwrite connection options, including paths to TLS certificate, key, or CA files. This can corrupt connection configuration or select unintended local cryptographic assets. This issue is fixed in version 1.13.0. |
| amqp091-go is a Go AMQP 0.9.1 client. Before version 1.13.0, a compromised or malicious AMQP broker can force the client to allocate resources for and process content body frames that exceed the negotiated frame_max limit. This can lead to unexpected memory consumption or application-layer denial of service (DoS), bypassing the protocol's built-in framing constraints. Version 1.13.0 contains a fix. No known workarounds are available. |
| The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.31.0, inbound AMQP command assembly in src/main/java/com/rabbitmq/client/impl/CommandAssembler.java processes a content-bearing method and header whose remainingBodyBytes value is smaller than a following AMQP.FRAME_BODY payload. CommandAssembler.consumeBodyFrame subtracts the peer-controlled payload length before validating that it fits, drives remainingBodyBytes negative, and throws a raw UnsupportedOperationException instead of MalformedFrameException. A malicious or compromised broker peer can send this malformed sequence on an open nonzero channel to terminate frame processing and close the client connection, causing denial of service for work using that connection. This issue is fixed in version 5.31.0. |
| The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.1, src/main/java/com/rabbitmq/client/impl/ValueReader.java uses ValueReader.readBytes to accept a wire-declared contentLength below Integer.MAX_VALUE and allocate a byte array before checking the bytes available in the frame. A malicious AMQP peer can send a LongString or byte-array field with type tag S and a declared length such as 0x7FFFFFFE during the pre-authentication connection.start server-properties table, causing an approximately 2 GB allocation and OutOfMemoryError before readFully consumes data. The resulting memory exhaustion can terminate the JVM and cause denial of service. This issue is fixed in version 5.33.1. |
