| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability.
`libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.)
#### CNetSetObj::m_F_n_Set_DNS_Addr command injection
The following function can take up to two addresses, performs no sanitization and then calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint.
int __fastcall CNetSetObj::m_F_n_Set_DNS_Addr(CNetSetObj *this, char *dns1, char *dns2)
{
int result; // r0
char v5[80]; // [sp+0h] [bp-50h] BYREF
if ( !dns1 )
result = 0;
if ( dns1 )
{
sprintf(v5, "/bin/echo nameserver %s > /etc/resolv.conf", dns1); // attacker controlled dns1 field
system(v5);
if ( dns2 )
{
sprintf(v5, "/bin/echo nameserver %s >> /etc/resolv.conf", dns2);
system(v5);
}
return 1;
}
return result; |
| GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485.
DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it.
Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable:
#### Gateway field stack overflow
The following code is vulnerable to a stack overflow that is attacker-controlled:
v7 = strlen(g_network_config->gateway);
memcpy(&reply_buf[216], g_network_config->gateway, v7); |
| GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485.
DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it.
Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable:
#### Net Mask field stack overflow
The following code is vulnerable to a stack overflow that is attacker-controlled:
v6 = strlen(g_network_config->net_mask);
memcpy(&reply_buf[184], g_network_config->net_mask, v6); |
| A memory corruption vulnerability exists in the GV-Cloud functionality of GeoVision GV-VMS V20 20.0.2.
A specially crafted network request can lead to a denial of service. An attacker can impersonate the legitimate server to trigger this vulnerability. |
| Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability.
`libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.)
#### CNetSetObj::m_F_n_Set_IP_Addr command injection
The following function takes a string as an ip address, performs no sanitization and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint.
int __fastcall CNetSetObj::m_F_n_Set_IP_Addr(const char **this, char *ip_addr)
{
bool v2; // zf
char v4[72]; // [sp+0h] [bp-48h] BYREF
v2 = *this == 0;
if ( *this )
v2 = ip_addr == 0;
if ( v2 )
return 0;
sprintf(v4, "/sbin/ifconfig %s %s", *this, ip_addr); // attacker controlled ip address
system(v4);
return 1;
} |
| Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability.
`libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.)
#### CNetSetObj::m_F_n_Set_Net_Mask command injection
The following function takes a string as a net mask address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint.
int __fastcall CNetSetObj::m_F_n_Set_Net_Mask(const char **this, char *netmask_addr)
{
bool v2; // zf
char v4[72]; // [sp+0h] [bp-48h] BYREF
v2 = *this == 0;
if ( *this )
v2 = netmask_addr == 0;
if ( v2 )
return 0;
sprintf(v4, "/sbin/ifconfig %s netmask %s", *this, netmask_addr); // attacker controlled netmask_addr
system(v4);
return 1;
} |
| Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability.
`libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.)
#### CNetSetObj::m_F_n_Set_Gate_way command injection
The following function takes a string as a gatewy address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint.
int __fastcall CNetSetObj::m_F_n_Set_Gate_way(const char **this, char *gw, char *dev)
{
char s[324]; // [sp+4h] [bp-144h] BYREF
if ( !dev && !*this || !gw )
return 0;
system("/sbin/route del -net 224.0.0.0 netmask 224.0.0.0");
system("/sbin/route del default ");
if ( dev )
sprintf(s, "/sbin/route add default gw %s dev %s", gw, dev); //attacker controlled gw string
else
sprintf(s, "/sbin/route add default gw %s dev %s", gw, *this); //attacker controlled gw string
system(s);
sprintf(s, "/sbin/route add -net 224.0.0.0 netmask 224.0.0.0 gw %s dev %s", gw, *this); //attacker controlled gw string
system(s);
return 1;
} |
| GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485.
DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it.
Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable:
#### DNS field stack overflow
The following code is vulnerable to a stack overflow that is attacker-controlled:
v8 = strlen(g_network_config->dns_addr);
memcpy(&reply_buf[248], g_network_config->dns_addr, v8); |
| An insufficient encryption vulnerability exists in the Device Authentication functionality of GeoVision GV-IP Device Utility 9.0.5. Listening to broadcast packets can lead to credentials leak. An attacker can listen to broadcast messages to trigger this vulnerability.
When interacting with various Geovision devices on the network, the utility may send privileged commands; in order to do so, the username and password of the device need to be provided. In some instances the command is broadcasted over UDP and the username/password are encrypted using a cryptographic protocol that appears to be derivated from Blowfish. However the symmetric key used for the encryption is also included in the packet, and thus the security of the username/password only relies on the "obscurity" of the encryption scheme. An attacker on the same LAN can listen to the broadcast traffic once an admin user interacts with the device, and decrypt the credentials using their own implementation of the algorithm. With this password the attacker would have full control over the device configuration, allowing them to change its ip address or even reset it to factory default. |
| A stack overflow vulnerability exists in the WebCam Server Login functionality of GeoVision GV-VMS V20 20.0.2. A specially crafted HTTP request can lead to an arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger this vulnerability. |
| A privilege escalation vulnerability exists in the Web Interface functionality of GeoVision LPC2011/LPC2211 1.10. A specially crafted HTTP request can lead to execute priviledged operation. An attacker can visit a webpage to trigger this vulnerability. |
| A privilege escalation vulnerability exists in the Web Interface / ssi.cgi functionality of GeoVision LPC2011/LPC2211 1.10. A specially crafted HTTP request can lead to credentials leak. An attacker can visit a webpage to trigger this vulnerability. |
| A guessable session cookie vulnerability exists in the Web Interface functionality of GeoVision LPC2011/LPC2211 1.10. A specially crafted series of HTTP requests can lead to an authentication bypas. An attacker can bruteforce session cookies to trigger this vulnerability. |
| An os command injection vulnerability exists in the DdnsSetting.cgi functionality of GeoVision LPC2011/LPC2211 1.10. A specially crafted DDNS configuration can lead to arbitrary command execution. An attacker can modify a configuration value to trigger this vulnerability. |
| A stack overflow vulnerability exists in the WebCam Server Login functionality of GeoVision GV-VMS V20 20.0.2. A specially crafted HTTP request can lead to an arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.
#### Stack-overflow via unconstrained sscanf
The call to `sscanf` at [1] to split the `Buffer` variable into the `username` and `password` variables doesn't limit the size of the extracted content to match the destination buffers' sizes. In this case, if either the username or password decoded from the authorization string exceeds `40` characters (the size the stack variables `username` and `password`) then a stack overflow will occur.
The data is controlled by an attacker, but sronger constraints (e.g. no null bytes) may make exploitation harder. A successful attack could lead to full code execution as SYSTEM on the machine running the service. |
| GV-VMS V20 is a Video Monitoring Software used to gather the feeds of many surveillance cameras and manage other security devices. It is a native application accessed locally, but it is also possible to enable remote access via the "WebCam Server" feature. Once enabled, it is possible to access to the management and monitoring feature via a regular Web interface. This webersever is another native application, compiled without ASLR, which makes exploitation much easier and more likely.
Most of the features require authentication before being reachable and leverage a standard login page to grant access. However the `gvapi` endpoint uses its own authentication mechanism via an `HTTP Authorization` header. It supports both `Basic` authentication and the `Digest` modes of authentication.
#### Stack-overflow via unbound copy of base64 decoded string
The `b64decoder` string is sized dynamically, but it is then copied to the `Buffer` stack variable one character at the time at [0], and there's no bound-check. As such, if the decoded string is bigger than 256 characters (the size of the `Buffer` variable) then a stack overflow occurs. Because the data can be fully controlled by an attacker and lack of ASLR, this vulnerability can easily be exploited to gain full code execution as SYSTEM on the machine running the service. |
| A remote code execution vulnerability
exists in Notification Settings on GeoVision GV-ASWeb 6.2.0. An authenticated
user with System Setting permissions can execute arbitrary commands on the
server by sending a crafted HTTP POST request to the ASWebCommon.srf backend
endpoint to bypass the frontend restrictions. |
| Multiple reflected cross-site scripting (xss) vulnerabilities exist in the Web Interface / ssi.cgi functionality of GeoVision LPC2011/LPC2211 1.10. A specially crafted malicious url can lead to an arbitrary javascript code execution. An attacker can provide a crafted URL to trigger this vulnerability. |
| Multiple reflected cross-site scripting (xss) vulnerabilities exist in the Web Interface / ssi.cgi functionality of GeoVision LPC2011/LPC2211 1.10. A specially crafted malicious url can lead to an arbitrary javascript code execution. An attacker can provide a crafted URL to trigger this vulnerability. Reflected XXS via the error message for requesting non-existing page. |
| An insufficient encryption vulnerability exists in the Device Authentication functionality of GeoVision GV-IP Device Utility 9.0.5. Listening to broadcast packets can lead to credentials leak. An attacker can listen to broadcast messages to trigger this vulnerability.
When interacting with various Geovision devices on the network, the utility may send privileged commands; in order to do so, the username and password of the device need to be provided. In some instances the command is broadcasted over UDP and the username/password are encrypted using a cryptographic protocol that appears to be derivated from Blowfish. However the symmetric key used for the encryption is also included in the packet, and thus the security of the username/password only relies on the "obscurity" of the encryption scheme. An attacker on the same LAN can listen to the broadcast traffic once an admin user interacts with the device, and decrypt the credentials using their own implementation of the algorithm. With this password the attacker would have full control over the device configuration, allowing them to change its ip address or even reset it to factory default. |
