| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security flaw was identified in the Orchestrator Plugin of Red Hat Developer Hub (Backstage). The issue occurs due to insufficient input validation in GraphQL query handling. An authenticated user can inject specially crafted input into API requests, which disrupts backend query processing. This results in the entire Backstage application crashing and restarting, leading to a platform-wide Denial of Service (DoS). As a result, legitimate users temporarily lose access to the platform. |
| A flaw was found in BusyBox. This vulnerability allows an attacker to modify files outside of the intended extraction directory by crafting a malicious tar archive containing unvalidated hardlink or symlink entries. If the tar archive is extracted with elevated privileges, this flaw can lead to privilege escalation, enabling an attacker to gain unauthorized access to critical system files. |
| A flaw was found in BusyBox. Incomplete path sanitization in its archive extraction utilities allows an attacker to craft malicious archives that when extracted, and under specific conditions, may write to files outside the intended directory. This can lead to arbitrary file overwrite, potentially enabling code execution through the modification of sensitive system files. |
| CoreDNS is a DNS server written in Go. In versions prior to 1.14.3, the gRPC, QUIC, DoH, and DoH3 transport implementations incorrectly handle TSIG authentication. For gRPC and QUIC, the server checks whether the TSIG key name exists in the configuration but never calls dns.TsigVerify() to validate the HMAC. If the key name matches a configured key, the tsigStatus field remains nil and the tsig plugin treats the request as successfully authenticated regardless of the MAC value. For DoH and DoH3, the issue is more severe: the DoHWriter.TsigStatus() method unconditionally returns nil, and the server never inspects the TSIG record at all. Any request containing a TSIG record is treated as authenticated over DoH and DoH3, even if the key name is invalid and the MAC is arbitrary.
An unauthenticated network attacker can exploit this to bypass TSIG-protected functionality such as AXFR/IXFR zone transfers, dynamic DNS updates, or other TSIG-gated plugin behavior. The DoH and DoH3 variants have a lower exploitation bar because the attacker does not need to know a valid TSIG key name.
This issue has been fixed in version 1.14.3. As a workaround, disable gRPC, QUIC, DoH, and DoH3 listeners where TSIG authentication is required, or restrict network-level access to affected transport ports to trusted sources only. |
| In adbd_tls_verify_cert of auth.cpp, there is a possible bypass of wireless ADB mutual authentication due to a logic error in the code. This could lead to remote (proximal/adjacent) code execution as the shell user with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Masa CMS is an open source content management system. In versions 7.2.0 through 7.2.9, 7.3.0 through 7.3.14, 7.4.0 through 7.4.9, and 7.5.0 through 7.5.2, a SQL injection vulnerability exists in the beanFeed.cfc component within the getQuery function's handling of the sortDirection parameter. The parameter value is concatenated directly into SQL queries without sanitization or parameterization. An unauthenticated remote attacker can exploit this to extract sensitive information, modify or delete database records, or potentially achieve remote code execution on the underlying database server.
This issue has been fixed in versions 7.2.10, 7.3.15, 7.4.10, and 7.5.3. As a workaround, use a WAF to block or restrict access to the beanFeed.cfc component, or deploy rules to detect SQL injection patterns targeting the sortDirection parameter. |
| FluentCMS 1.2.3 is vulnerable to Cross Site Scripting (XSS) in TextHTML plugin. |
| Masa CMS is an open source content management system. In versions 7.5.2 and earlier, a SQL injection vulnerability exists in the beanFeed.cfc component within the getQuery function's processing of the sortBy parameter. The application fails to properly sanitize or parameterize this input before incorporating it into dynamic SQL statements. An unauthenticated remote attacker can execute arbitrary SQL commands against the database, potentially gaining access to sensitive data, modifying or deleting records, or escalating privileges to administrative control.
This issue has been fixed in versions 7.2.10, 7.3.15, 7.4.10, and 7.5.3. As a workaround, configure WAF rules to block malicious SQL patterns in the sortBy parameter sent to beanFeed.cfc. |
| PhpSpreadsheet is a library for reading and writing spreadsheet files. In versions 1.30.3 and earlier, 2.0.0 through 2.1.15, 2.2.0 through 2.4.4, 3.3.0 through 3.10.4, and 4.0.0 through 5.6.0, the HTML Writer skips htmlspecialchars() output escaping when a cell uses a custom number format containing the @ text placeholder with additional literal text (e.g., @ "items"). The escaping is only applied when the formatted output strictly equals the original cell value. When the format code contains @ with quoted literal text, the formatter substitutes the raw cell value into the format string and returns early without invoking the escaping callback. An attacker who can control cell content in a spreadsheet processed by the HTML Writer can inject arbitrary HTML and JavaScript into the generated output. This issue has been fixed in versions 1.30.4, 2.1.16, 2.4.5, 3.10.5, and 5.7.0. |
| Jupyter Server is the backend for Jupyter web applications. In versions 2.17.0 and earlier, a path traversal vulnerability in the REST API allows an authenticated user to escape the configured root_dir and access sibling directories whose names begin with the same prefix as the root_dir. For example, with a root_dir named "test", the API permits access to a sibling directory named "testtest" through a crafted request to the /api/contents endpoint using encoded path components. An attacker can read, write, and delete files in affected sibling directories. Multi-tenant deployments using predictable naming schemes are particularly at risk, as a user with a directory named "user1" could access directories for user10 through user19 and beyond. A user who can choose a single-character folder name could gain access to a significant number of sibling directories.
Version 2.18.0 contains a fix. As a workaround, ensure folder names do not share a common prefix with any sibling directory. |
| Bitcoin Core through 28.x has a security issue, the details of which are not disclosed. The earliest affected version is 0.14. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, a Time-of-Check-to-Time-of-Use (TOCTOU) race condition exists during addon installation. When a user installs an addon through the SandMan interface, UpdUtil.exe is spawned as SYSTEM by SbieSvc but stages files in the user-writable %TEMP%\sandboxie-updater directory. After UpdUtil verifies file hashes against the signed addon manifest, install.bat extracts files.cab and executes config.exe from its contents. Between hash verification and extraction, an unprivileged user can replace files.cab with a crafted cabinet containing a malicious executable, which is then run as SYSTEM. No UAC prompt is required.
This issue has been fixed in version 1.17.3. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, SbieIniServer::HashPassword converts a SHA-1 digest to hexadecimal incorrectly. The high nibble of each byte is shifted right by 8 instead of 4, which always produces zero for an 8-bit value. As a result, the stored EditPassword hash only preserves the low nibble of each digest byte, reducing the effective entropy from 160 bits to 80 bits. This is layered on top of an unsalted SHA-1 scheme. The reduced entropy makes leaked or backed-up password hashes materially easier to brute-force.
This issue has been fixed in version 1.17.3. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, NamedPipeServer::OpenHandler copies the server field from NAMED_PIPE_OPEN_REQ into a fixed WCHAR pipename[160] stack buffer using wcscat without verifying null termination. The handler only enforces a minimum packet size, and since the service pipe accepts variable-length messages, a sandboxed caller can fill the server[48] field with non-zero data and append additional controlled wide characters after the structure. wcscat then reads past the fixed field and overflows the stack buffer in the SYSTEM service. This message is restricted to sandboxed callers, making it a sandbox escape vector. This can lead to a crash of the SbieSvc service or potential code execution as SYSTEM. This issue has been fixed in version 1.17.3. |
| A flaw was found in the X.Org X server. This vulnerability, an out-of-bounds read, affects the XKB (X Keyboard Extension) modifier map handling. An attacker with access to the X11 server can exploit this by sending a malformed request, which causes the server to read beyond its intended memory boundaries. This can lead to the exposure of sensitive information or cause the server to crash, resulting in a denial of service. |
| A flaw was found in the X.Org X server. This out-of-bounds read vulnerability in the XKB geometry processing, specifically within the `CheckSetGeom()` and `XkbAddGeomKeyAlias` functions, allows an attacker to read uninitialized or out-of-bounds memory. An attacker with a connection to the X11 server, either locally or remotely, can exploit this without user interaction. This could lead to the disclosure of memory contents or cause a denial of service by crashing the server. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, several ProcessServer handlers (KillAllHandler, SuspendAllHandler, and RunSandboxedHandler) copy a WCHAR boxname[34] field from request structures into WCHAR[40] stack buffers using wcscpy without verifying null termination. Because the service pipe accepts variable-length packets larger than the request structure, an attacker can fill the boxname field with non-zero data and append additional controlled wide characters after the structure. wcscpy then reads past the fixed field and overflows the destination stack buffer. The service pipe is created with a NULL DACL, allowing any local process to connect, and the unsafe copy occurs before authorization checks. This can lead to a crash of the SbieSvc service or potential code execution as SYSTEM. This issue has been fixed in version 1.17.3. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, the SbieIniServer RunSbieCtrl handler contains a stack buffer overflow. The MSGID_SBIE_INI_RUN_SBIE_CTRL message is handled before normal sandbox and impersonation checks, and for non-sandboxed callers, the handler copies the trailing message payload into a fixed-size WCHAR ctrlCmd[128] stack buffer using memcpy without verifying the length fits within the buffer. The service pipe is created with a NULL DACL, allowing any local interactive process to connect and send an oversized payload to overflow the stack. This can lead to a crash of the SbieSvc service or potential code execution as SYSTEM. This issue has been fixed in version 1.17.3. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, the SbieSvc proxy service's GetRawInputDeviceInfoSlave handler contains two vulnerabilities that can be chained for sandbox escape. First, when a sandboxed process sends an IPC request with cbSize set to 0, up to 32KB of uninitialized stack memory from the service process is returned, leaking return addresses and stack cookies which bypass ASLR and /GS protections. Second, the handler performs a memcpy with an attacker-controlled length without verifying it fits within the 32KB stack buffer, enabling a stack buffer overflow. By chaining the information leak with the overflow, a sandboxed process can execute a ROP chain to achieve SYSTEM privilege escalation, even from a Security Hardened Sandbox. Hardware-enforced shadow stacks (Intel CET) prevent the ROP chain execution but do not mitigate the information leak. This issue has been fixed in version 1.17.3. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, an INI injection vulnerability allows any standard local user to bypass configuration restrictions (EditAdminOnly and ConfigPassword) and inject arbitrary directives into the global Sandboxie.ini configuration file. The background service skips authorization checks for IPC messages targeting sections beginning with UserSettings_, but does not sanitize CRLF characters in either the value parameter (via MSGID_SBIE_INI_ADD_SETTING) or the setting name parameter (via MSGID_SBIE_INI_SET_SETTING). An attacker can inject a new sandbox section header with unrestricted permissions, enabling sandbox escape and SYSTEM privilege escalation. This issue has been fixed in version 1.17.3. |
