| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) feature of Cisco IOS Software, IOS XE Software, Secure Firewall Adaptive Security Appliance (ASA) Software, and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to a lack of proper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. In the case of Cisco IOS and IOS XE Software, a successful exploit could allow the attacker to cause the device to reload unexpectedly. In the case of Cisco ASA and FTD Software, a successful exploit could allow the attacker to partially exhaust system memory, causing system instability such as being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| A vulnerability in the implementation of the CLI on a device that is running ConfD could allow an authenticated, local attacker to perform a command injection attack.
The vulnerability is due to insufficient validation of a process argument on an affected device. An attacker could exploit this vulnerability by injecting commands during the execution of this process. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privilege level of ConfD, which is commonly root. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) feature of Cisco IOS Software, IOS XE Software, Secure Firewall Adaptive Security Appliance (ASA) Software, and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to a lack of proper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. In the case of Cisco IOS and IOS XE Software, a successful exploit could allow the attacker to cause the device to reload unexpectedly. In the case of Cisco ASA and FTD Software, a successful exploit could allow the attacker to partially exhaust system memory, causing system instability such as being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| A vulnerability in the IKEv2 feature of Cisco IOS Software, IOS XE Software, Secure Firewall ASA Software, and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a DoS condition.
This vulnerability is due to the improper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause an infinite loop that exhausts resources and could cause the device to reload. |
| Multiple vulnerabilities in Cisco IOS XE Software of could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust.
These vulnerabilities are due path traversal and improper image integrity validation. A successful exploit could allow the attacker to execute persistent code on the underlying operating system.
Because this allows the attacker to bypass a major security feature of the device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.
For more information about these vulnerabilities, see the Details ["#details"] section of this advisory.
ERP |
| A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, causing a denial of service (DoS) condition.
This vulnerability is due to improper handling of malformed Control and Provisioning of Wireless Access Points (CAPWAP) packets. An attacker could exploit this vulnerability by sending malformed CAPWAP packets through an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. |
| A vulnerability in the CLI of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, local attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to a buffer overflow. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the CLI prompt. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when parsing a specific SNMP request. An attacker could exploit this vulnerability by sending a specific SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| A vulnerability in the Day One setup process of Cisco IOS XE Software for Catalyst 9800 Series Wireless Controllers for Cloud (9800-CL) could allow an unauthenticated, remote attacker to access the public-key infrastructure (PKI) server that is running on an affected device.
This vulnerability is due to incomplete cleanup upon completion of the Day One setup process. An attacker could exploit this vulnerability by sending Simple Certificate Enrollment Protocol (SCEP) requests to an affected device. A successful exploit could allow the attacker to request a certificate from the virtual wireless controller and then use the acquired certificate to join an attacker-controlled device to the virtual wireless controller. |
| A vulnerability in the handling of certain Ethernet frames in Cisco IOS XE Software for Catalyst 9000 Series Switches could allow an unauthenticated, adjacent attacker to cause an egress port to become blocked and drop all outbound traffic.
This vulnerability is due to improper handling of crafted Ethernet frames. An attacker could exploit this vulnerability by sending crafted Ethernet frames through an affected switch. A successful exploit could allow the attacker to cause the egress port to which the crafted frame is forwarded to start dropping all frames, resulting in a denial of service (DoS) condition. |
| A vulnerability in the Internet Key Exchange version 2 (IKEv2) feature of Cisco IOS Software, Cisco IOS XE Software, Cisco Secure Firewall Adaptive Security Appliance (ASA) Software, and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit of Cisco IOS Software and IOS XE Software could allow the attacker to cause the affected device to reload, resulting in a DoS condition. A successful exploit of Cisco Secure Firewall ASA Software and Secure FTD Software could allow the attacker to partially exhaust system memory, resulting in system instability, such as the inability to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| A vulnerability in the web-based Cisco IOx application hosting environment management interface of Cisco IOS XE Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| A vulnerability in the web-based Cisco IOx application hosting environment management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform a carriage return line feed (CRLF) injection attack against a user.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to arbitrarily inject log entries, manipulate the structure of log files, or obscure legitimate log events. |
| A vulnerability in the Secure Copy Protocol (SCP) server feature of Cisco IOS XE Software could allow an authenticated, local attacker with low privileges to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of a malformed SCP request. An attacker could exploit this vulnerability by issuing a crafted command through SSH. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability exists because incorrect privileges are associated with the start maintenance command. An attacker could exploit this vulnerability by accessing the management CLI of the affected device as a low-privileged user and using the start maintenance command. A successful exploit could allow the attacker to put the device in maintenance mode, which shuts down interfaces, resulting in a denial of service (DoS) condition. In case of exploitation, a device administrator can connect to the CLI and use the stop maintenance command to restore operations. |
| A vulnerability in the bootloader of Cisco IOS XE Software for Cisco Catalyst 9200 Series Switches, Cisco Catalyst ESS9300 Embedded Series Switches, Cisco Catalyst IE9310 and IE9320 Rugged Series Switches, and Cisco IE3500 and IE3505 Rugged Series Switches could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to an affected device to execute arbitrary code at boot time and break the chain of trust.
This vulnerability is due to insufficient validation of software at boot time. An attacker could exploit this vulnerability by manipulating the loaded binaries on an affected device to bypass some of the integrity checks that are performed during the boot process. A successful exploit could allow the attacker to execute code that bypasses the requirement to run Cisco-signed images.
Cisco has assigned this security advisory a Security Impact Rating (SIR) of High rather than Medium as the score indicates because this vulnerability allows an attacker to bypass a major security feature of a device. |
| A vulnerability in the processing of Control and Provisioning of Wireless Access Points (CAPWAP) packets of Cisco IOS XE Wireless Controller Software for the Catalyst CW9800 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of a malformed CAPWAP packet. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition. |
| A vulnerability in the TLS library of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust the available memory of an affected device.
This vulnerability is due to improper management of memory resources during TLS connection setup. An attacker could exploit this vulnerability by repeatedly triggering the conditions that cause the memory increase. This could be done in a variety of ways, such as by repeatedly attempting Extensible Authentication Protocol (EAP) authentication when local EAP is enabled on an affected device or by using a machine-in-the-middle attack and resetting TLS connections between the affected device and other devices. A successful exploit could allow the attacker to exhaust the available memory on an affected device, resulting in an unexpected reload and a denial of service (DoS) condition. |
| A vulnerability in the DHCP snooping feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause BOOTP packets to be forwarded between VLANs, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper handling of BOOTP packets on Cisco Catalyst 9000 Series Switches. An attacker could exploit this vulnerability by sending BOOTP request packets to an affected device. A successful exploit could allow an attacker to forward BOOTP packets from one VLAN to another, resulting in BOOTP VLAN leakage and potentially leading to high CPU utilization. This makes the device unreachable (either through console or remote management) and unable to forward traffic, resulting in a DoS condition.
Note: This vulnerability can be exploited with either unicast or broadcast BOOTP packets.
There are workarounds that address this vulnerability. |
