| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeRDP 3.0.0 before 3.32.0 contains a heap use-after-free vulnerability in smartcard emulation when SCARD_IOCTL_DISCONNECT and SCARD_IOCTL_TRANSMIT operate concurrently on one card handle. A malicious RDP server can overlap these IRPs through separate context workers to free and reuse the SCardHandle, causing client-process heap corruption and termination. |
| FreeRDP 3.0.0 before 3.32.0 does not remove card handles when Emulate_SCardReleaseContext releases a smartcard-emulation context, so Emulate_SCardTransmit later looks up the deleted parent context and reaches a terminating WINPR_ASSERT. A malicious RDP server can crash a connecting client with smartcard emulation and redirection enabled by releasing a context, establishing another, and issuing SCardTransmit with the stale card handle. |
| FreeRDP 3.29.0 before 3.32.0 contains a double free in the client's async-update message proxy, which shallow-copies the parser-owned PolygonSC or PolygonCB points array when numPoints is zero, so both the queue consumer and parser cleanup free it. A malicious RDP server can send a point-bearing polygon order followed by a zero-point order to crash a client with +async-update enabled. |
| FreeRDP 2.3.0 before 3.32.0 dereferences a NULL stream in rdg_process_close_packet in libfreerdp/core/gateway/rdg.c because rdg_process_control_packet accepts a header-only PKT_TYPE_CLOSE_CHANNEL packet and passes the null payload without a check. A malicious or compromised RD Gateway can send an eight-byte CLOSE_CHANNEL header to crash a connecting FreeRDP client. |
| FreeRDP from 2.3.0 before 3.32.0 contains an infinite loop vulnerability in http_chuncked_read that allows malicious RD Gateways to hang clients by sending incomplete chunked responses. Attackers can send a partial chunk-size line or footer followed by a clean TLS shutdown, causing zero-byte reads to loop forever and freeze the client decoder thread. |
| FreeRDP 3.0.0-beta1 before 3.32.0 on Unix builds with PKCS#11 support has a stack-based buffer overflow in wprintKeyName() in WinPR's NCrypt PKCS#11 provider. It hex-encodes a key's CKA_ID, which can be up to 64 bytes, into a fixed 128-byte stack buffer. An attacker supplying a malicious PKCS#11 token or module whose key and matching certificate use a 55- to 64-byte CKA_ID can overflow the client's stack during key enumeration, causing a crash. |
| FreeRDP 3.27.1 before 3.32.0 contains a NULL pointer dereference in update_read_cache_bitmap_v3_order() in libfreerdp/core/orders.c, which accesses the client bitmap cache when the CBR3_DO_NOT_CACHE flag is set, even though the cache is not yet initialized before Demand Active. A malicious or compromised RDP server can send a Cache Bitmap V3 order during connection setup to crash a connecting client that has enabled the non-default Bitmap Cache V3 feature (/cache:codec:<rfx|nsc|jpeg>). |
| Positive mapped-video coordinates overflow and abort FreeRDP clients A malicious or compromised RDP server can terminate a FreeRDP client after the user connects with video redirection enabled. |
| FreeRDP 3.18.0 before 3.32.0 has a heap-based out-of-bounds write in freerdp_interruptible_get_line, which shrinks the buffer to 32 bytes while keeping a pre-filled suggested username's length as its write offset. A malicious or compromised ARM routing service can return a long redirectedUsername that reaches the CLI credential prompt, crashing the client when the user types input. |
| FreeRDP 3.0.0-beta4 before 3.32.0 contains a NULL pointer dereference in arm_handle_request_ok when an ARM endpoint returns an empty HTTP 200 body. Attackers controlling the configured ARM gateway can return a zero-length body to pass NULL to strnlen and crash the connecting client. |
| FreeRDP 3.0.0-beta1 before 3.32.0, when built with verbose WinPR assertions and using smartcard emulation, has a reachable assertion: the emulated SCardStatusA passes a NULL reader-name destination to scard_copy_strings. A malicious RDP server can send an SCardStatusA request with fmszReaderNamesIsNULL=1 to abort a connecting client. |
| FreeRDP from 2.0.0-beta1 before 3.28.0 contains an out-of-bounds read vulnerability in smartcard_LocateCardsByATRA_Call because the ATR pattern cbAtr byte count is not capped. Malicious RDP servers can send crafted ATR mask arrays to use query timing as an oracle, leaking heap memory bit-by-bit to defeat ASLR and aid RCE exploits. |
| FreeRDP from 3.0.0-beta1 before 3.32.0 contains a use-after-free vulnerability in smartcard handling that allows attackers to access a freed smartcard handle object after an invalid connect operation. Attackers can trigger an invalid smartcard connect operation to cause reuse of the freed handle, leading to memory corruption or crashes. |
| fastify is a fast and low overhead web framework for Node.js. In versions 5.12.2 through 5.12.5, the routine that lowercases header names declared in a route schema does not lowercase the enum or const header names nested inside a propertyNames subschema. As a result, a header allow-list or deny-list written with canonical (non-lowercase) casing never matches the incoming lowercased header, so a restricted header passes validation and reaches the route handler. An attacker can therefore bypass a case-sensitive header validation rule and smuggle a forbidden header past the schema, affecting the integrity of request handling. The issue is fixed in fastify 5.12.6, and users should upgrade to 5.12.6 or later. There is no workaround other than upgrading, though applications can declare header names in lowercase to avoid the mismatch. |
| A low privileged remote attacker is able to view a list of roles that should only be accessible to administrators. This results in a low level of confidentiality breach, as no particularly sensitive information is affected. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/pt: Fix stop/start with no update
If pt_event_stop() is called without PERF_EF_UPDATE flag, then
perf_aux_output_end() is not called. A subsequent call to pt_event_start()
will call perf_aux_output_begin() again which violates the rule against
nesting and triggers a WARNING in perf_aux_output_begin().
Originally, pt_event_stop() was never called without PERF_EF_UPDATE,
because the only code paths to do so are from event overflow, and Intel PT
does not do that.
However the introduction of group throttling by commit 9734e25fbf5ae
("perf: Fix the throttle logic for a group") meant that an Intel PT event
could be throttled if it was part of a group. Throttling calls PMU
->stop() / ->start() callbacks without flags.
An example is when AUX area sampling is used. The following commands
hit the issue:
echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate
perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \
-- bash -c 'for i in `seq 1 100000` ; do true ; done'
Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and
perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit
indicates that an AUX output context is still open.
Amend pt_event_start() / pt_event_stop() accordingly so that begin/end
stay balanced:
- In non-snapshot mode, stop() always closes the buffer (the buffer may
have run out of space, and that accounting is done by the update), so
a following start() opens a fresh one as before.
- In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the
buffer open so that pt_event_snapshot_aux() can still copy from it,
and start() then only re-enables tracing instead of calling
perf_aux_output_begin() again.
Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set
(as is required by the documentation), so a final call to
perf_aux_output_end() is assured. |
| A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V6.0). Affected devices do not properly restrict access to various database queries, allowing users to retrieve system-wide information that is not intended for their privilege level. This could allow an authenticated attacker to gather sensitive information about the system's infrastructure, including details on all devices, substations, users, and scheduled activities. |
| A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V6.0). Affected devices do not properly validate or sanitize the filename of firmware files uploaded to the system. This could allow an authenticated attacker with specific privileges to execute arbitrary SQL commands on the underlying database. |
| A vulnerability has been identified in Industrial Edge App Publisher (All versions < V1.27.9). The application fails to properly sanitize or escape data received from the backend before rendering it in the user interface. Because the front end is integrated with Node.js, this vulnerability allows for the execution of arbitrary JavaScript, which can be leveraged to achieve remote code execution (RCE) on the victim's machine |
| Dayforce ESS Excelity is vulnerable to Path Traversal in file download functionality. An unauthenticated attacker can sent GET request with file path parameter set to any path including an absolute
local file path.
This issue was fixed in version V4. |
