| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/apic: Disable x2apic on resume if the kernel expects so
When resuming from s2ram, firmware may re-enable x2apic mode, which may have
been disabled by the kernel during boot either because it doesn't support IRQ
remapping or for other reasons. This causes the kernel to continue using the
xapic interface, while the hardware is in x2apic mode, which causes hangs.
This happens on defconfig + bare metal + s2ram.
Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be
disabled, i.e. when x2apic_mode = 0.
The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the
pre-sleep configuration or initial boot configuration for each CPU, including
MSR state:
When executing from the power-on reset vector as a result of waking from an
S2 or S3 sleep state, the platform firmware performs only the hardware
initialization required to restore the system to either the state the
platform was in prior to the initial operating system boot, or to the
pre-sleep configuration state. In multiprocessor systems, non-boot
processors should be placed in the same state as prior to the initial
operating system boot.
(further ahead)
If this is an S2 or S3 wake, then the platform runtime firmware restores
minimum context of the system before jumping to the waking vector. This
includes:
CPU configuration. Platform runtime firmware restores the pre-sleep
configuration or initial boot configuration of each CPU (MSR, MTRR,
firmware update, SMBase, and so on). Interrupts must be disabled (for
IA-32 processors, disabled by CLI instruction).
(and other things)
So at least as per the spec, re-enablement of x2apic by the firmware is
allowed if "x2apic on" is a part of the initial boot configuration.
[1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization
[ bp: Massage. ] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix in-place encryption corruption in SMB2_write()
SMB2_write() places write payload in iov[1..n] as part of rq_iov.
smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message()
encrypts iov[1] in-place, replacing the original plaintext with
ciphertext. On a replayable error, the retry sends the same iov[1]
which now contains ciphertext instead of the original data,
resulting in corruption.
The corruption is most likely to be observed when connections are
unstable, as reconnects trigger write retries that re-send the
already-encrypted data.
This affects SFU mknod, MF symlinks, etc. On kernels before
6.10 (prior to the netfs conversion), sync writes also used
this path and were similarly affected. The async write path
wasn't unaffected as it uses rq_iter which gets deep-copied.
Fix by moving the write payload into rq_iter via iov_iter_kvec(),
so smb3_init_transform_rq() deep-copies it before encryption. |
| Insufficient parameter sanitization in TEE SOC Driver could allow an attacker to issue a malformed DRV_SOC_CMD_ID_SRIOV_CHECK_TA_COMPAT to cause incorrect shared memory mapping, potentially resulting in unexpected behavior. |
| PyTorch Lightning is a deep learning framework to pretrain and finetune AI models. Versions 2.6.2 and 2.6.2 have introduced functionality consistent with a credential harvesting mechanism. |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to 26.1.7, a logic flaw in the OPNsense lockout_handler allows an unauthenticated attacker to continuously reset the authentication failure counter for their IP address. By interjecting a crafted username containing a success keyword ("Accepted" or "Successful login") between normal brute-force attempts, an attacker can prevent the failure counter from ever reaching the lockout threshold. This vulnerability is fixed in 26.1.7. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: add missing RCU unlock in error path in try_release_subpage_extent_buffer()
Call rcu_read_lock() before exiting the loop in
try_release_subpage_extent_buffer() because there is a rcu_read_unlock()
call past the loop.
This has been detected by the Clang thread-safety analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050-core: fix pm_runtime error handling
The return value of pm_runtime_get_sync() is not checked, allowing
the driver to access hardware that may fail to resume. The device
usage count is also unconditionally incremented. Use
pm_runtime_resume_and_get() which propagates errors and avoids
incrementing the usage count on failure.
In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()
failure since postdisable does not run when preenable fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis: Fix NULL pointer dereference in adis_init
The adis_init() function dereferences adis->ops to check if the
individual function pointers (write, read, reset) are NULL, but does
not first check if adis->ops itself is NULL.
Drivers like adis16480, adis16490, adis16545 and others do not set
custom ops and rely on adis_init() assigning the defaults. Since struct
adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL
when adis_init() is called, causing a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : adis_init+0xc0/0x118
Call trace:
adis_init+0xc0/0x118
adis16480_probe+0xe0/0x670
Fix this by checking if adis->ops is NULL before dereferencing it,
falling through to assign the default ops in that case. |
| Gotenberg is a Docker-powered stateless API for PDF files. Prior to 8.31.0, the default deny-lists used by Gotenberg's downloadFrom feature and webhook feature are bypassable. Because the filter is regex-based and case-sensitive, an unauthenticated attacker can supply URLs such as http://[::ffff:127.0.0.1]:... and reach loopback or private HTTP services that the default deny-list is intended to block. This crosses a real security boundary because an external caller can force the server to make outbound requests to internal-only targets. This vulnerability is fixed in 8.31.0. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1780: fix PM runtime leak on error path
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails. |
| The _load_model() function in the neural_magic_training.py script of the optimate project in commit a6d302f912b481c94370811af6b11402f51d377f (2024-07-21) is vulnerable to insecure deserialization (CWE-502). When loading a model state dictionary from a state_dict.pt file via torch.load(), the function does not enable the weights_only=True security parameter. This allows the deserialization of arbitrary Python objects through the Pickle module. A remote attacker can exploit this by providing a maliciously crafted state_dict.pt file within a directory specified via the --model argument, leading to arbitrary code execution during the deserialization process on the victim's system. |
| The _load_model() function in the neural_magic_training.py script of the optimate project in commit a6d302f912b481c94370811af6b11402f51d377f (2024-07-21) is vulnerable to insecure deserialization (CWE-502). When a user provides a single model file path (e.g., .pt or .pth) via the --model command-line argument, the function loads the file using torch.load() without enabling the weights_only=True security parameter. This allows the deserialization of arbitrary Python objects through the Pickle module. A remote attacker can exploit this by providing a maliciously crafted model file, leading to arbitrary code execution during deserialization on the victim's system. |
| Northern.tech CFEngine Enterprise before 3.21.8, 3.24.3, and 3.27.0 has Incorrect Access Control. |
| Remote Code Execution in coleam00 Archon 0.1.0. A crafted HTML page, when accessed by a victim, can execute commands, run prompts on behalf of the user, control the Archon UI features, and steal all Archon information available on the UI including API keys. |
| Foscam VD1 Video Doorbell before V5.3.13_1072 is vulnerable to Cleartext Transmission of Sensitive Information. The device transmits sensitive Session Description Protocol (SDP), including ICE credentials and candidates, in cleartext over network interfaces. An attacker with network visibility can intercept these credentials to hijack media streams or authenticate to Foscam's TURN/relay infrastructure to forward arbitrary traffic at the vendor's expense. |
| Insufficient policy enforcement in IFrame Sandbox in Google Chrome on Windows prior to 148.0.7778.168 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient policy enforcement in Payments in Google Chrome on Android prior to 148.0.7778.168 allowed a remote attacker to bypass discretionary access control via a crafted HTML page. (Chromium security severity: Medium) |
| A DLL hijacking vulnerability in the AMD Cleanup Utility could allow an attacker to achieve privilege escalation potentially resulting in arbitrary code execution. |
| Imager versions through 1.030 for Perl allow a heap out of bounds (OOB) write on crafted multi-frame GIF files.
Imager::File::GIF's i_readgif_multi_low allocates a single per-row buffer GifRow sized for the GIF's global screen width 'SWidth' and reuses it across every image in the file.
The page-match branch validates Image.Width + Image.Left > SWidth before each DGifGetLine write, but the parallel skip-image branch at imgif.c:790-805 calls DGifGetLine(GifFile, GifRow, Width) with no such check. |
| Vim is an open source, command line text editor. Prior to 9.2.0479, a command injection vulnerability exists in tar#Vimuntar() in
runtime/autoload/tar.vim when decompressing .tgz archives on Unix-like systems. The function builds :!gunzip and :!gzip -d commands using shellescape(tartail) without the {special} flag, allowing a crafted archive filename to trigger Vim cmdline-special expansion and execute shell commands in the user's context. This vulnerability is fixed in 9.2.0479. |
