Export limit exceeded: 372690 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (372690 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64417 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: shrinker: fix NULL pointer dereference in debugfs shrinker_debugfs_add() creates both "count" and "scan" debugfs files unconditionally. That assumes every shrinker implements both count_objects() and scan_objects(), which is not guaranteed. For example, the xen-backend shrinker sets count_objects() but leaves scan_objects() NULL, so writing to its scan file calls through a NULL function pointer and panics the kernel: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. Call Trace: <TASK> shrinker_debugfs_scan_write+0x12e/0x270 full_proxy_write+0x5f/0x90 vfs_write+0xde/0x420 ? filp_flush+0x75/0x90 ? filp_close+0x1d/0x30 ? do_dup2+0xb8/0x120 ksys_write+0x68/0xf0 ? filp_flush+0x75/0x90 do_syscall_64+0xb3/0x5b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The count path has the same issue in principle if a shrinker omits count_objects(). To fix it, only create "count" and "scan" debugfs files when the corresponding callbacks are present. | ||||
| CVE-2026-64420 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: mfd: cros_ec: Delay dev_set_drvdata() until probe success If ec_device_probe() fails, cros_ec_class_release releases memory for the cros_ec_dev structure. However, because the drvdata was already set, sub-drivers like cros_ec_typec can still retrieve the stale pointer via the platform device. This leads to a use-after-free when cros_ec_typec attempts to access &typec->ec->ec->dev on a device that has already been released. Move dev_set_drvdata() to ensure that the pointer is only made available once all initialization steps have succeeded. sysfs: cannot create duplicate filename '/class/chromeos/cros_ec' Call trace: sysfs_do_create_link_sd+0x94/0xdc sysfs_create_link+0x30/0x44 device_add_class_symlinks+0x90/0x13c device_add+0xf0/0x50c ec_device_probe+0x150/0x4f0 platform_probe+0xa0/0xe0 ... BUG: KASAN: invalid-access in __memcpy+0x44/0x230 Write at addr f5ffff809e2d33ac by task kworker/u32:5/125 Pointer tag: [f5], memory tag: [fe] Tainted : [W]=WARN, [O]=OOT_MODULE Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3 Workqueue: events_unbound deferred_probe_work_func Call trace: __memcpy+0x44/0x230 cros_ec_check_features+0x60/0xcc [cros_ec_proto] cros_typec_probe+0xe8/0x6e0 [cros_ec_typec] platform_probe+0xa0/0xe0 | ||||
| CVE-2026-64421 | 1 Linux | 1 Linux Kernel | 2026-08-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix use-after-free on remove KASAN reports a slab-use-after-free in __media_entity_remove_link() during rmmod of imx8_isi: BUG: KASAN: slab-use-after-free in __media_entity_remove_link+0x608/0x650 Read of size 2 at addr ffff0000d47cb02a by task rmmod/724 Call trace: __media_entity_remove_link+0x608/0x650 __media_entity_remove_links+0x78/0x144 __media_device_unregister_entity+0x150/0x280 media_device_unregister_entity+0x48/0x68 v4l2_device_unregister_subdev+0x158/0x300 v4l2_async_unbind_subdev_one+0x22c/0x358 v4l2_async_nf_unbind_all_subdevs+0xfc/0x1c0 v4l2_async_nf_unregister+0x5c/0x14c mxc_isi_remove+0x124/0x2a0 [imx8_isi] Allocated by task 249: __kmalloc_noprof+0x27c/0x690 mxc_isi_crossbar_init+0x22c/0x560 [imx8_isi] Freed by task 724: kfree+0x1e4/0x5b0 mxc_isi_crossbar_cleanup+0x34/0x80 [imx8_isi] mxc_isi_remove+0x11c/0x2a0 [imx8_isi] The problem is that mxc_isi_remove() calls mxc_isi_crossbar_cleanup() before mxc_isi_v4l2_cleanup(). The crossbar cleanup frees the media entity pads, but the subsequent v4l2 cleanup still tries to remove media links that reference those pads. Fix this by calling mxc_isi_v4l2_cleanup() before mxc_isi_crossbar_cleanup() to ensure all media entities are properly unregistered while the pads are still valid. | ||||
| CVE-2026-64423 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: remove multicast group from hash table on device destruction When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through the multicast list and calls ip_ma_put() on each membership, scheduling them for RCU reclamation. However, they are not unlinked from the device's multicast hash table (mc_hash). Since the device remains published in dev->ip_ptr until after ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash can still locate and access the multicast group after its refcount is decremented. If the RCU callback runs and frees the group while a reader is accessing it, a use-after-free occurs. Fix this by unlinking the multicast group from mc_hash using ip_mc_hash_remove() before scheduling it for reclamation. BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0 Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276 Call Trace: <IRQ> dump_stack_lvl+0x67/0x90 print_report+0x175/0x7c0 kasan_report+0x147/0x180 ip_check_mc_rcu+0x149/0x3f0 udp_v4_early_demux+0x36d/0x12d0 ip_rcv_finish_core+0xb8b/0x1390 ip_rcv_finish+0x54/0x120 NF_HOOK+0x213/0x2b0 __netif_receive_skb+0x126/0x340 process_backlog+0x4f2/0xf00 __napi_poll+0x92/0x2c0 net_rx_action+0x583/0xc60 handle_softirqs+0x236/0x7f0 do_softirq+0x57/0x80 </IRQ> Allocated by task 2239: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x72/0x90 ____ip_mc_inc_group+0x31a/0xa40 __ip_mc_join_group+0x334/0x3f0 do_ip_setsockopt+0x16fa/0x2010 ip_setsockopt+0x3f/0x90 do_sock_setsockopt+0x1ad/0x300 Freed by task 0: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x40/0x50 __kasan_slab_free+0x3a/0x60 __rcu_free_sheaf_prepare+0xd4/0x220 rcu_free_sheaf+0x36/0x190 rcu_core+0x8d9/0x12f0 handle_softirqs+0x236/0x7f0 | ||||
| CVE-2026-69153 | 1 Postcss | 1 Postcss | 2026-08-03 | 7.5 High |
| PostCSS takes a CSS file and provides an API to analyze and modify its rules by transforming the rules into an Abstract Syntax Tree. Prior to 8.5.19, if from is unset, an attacker can cause PreviousMap.loadFile() to read an unintended source-map file by supplying an absolute or directory-traversal sourceMappingURL. The resulting map’s sources and sourcesContent may then be exposed to the application. This issue is fixed in version 8.5.19. | ||||
| CVE-2026-20494 | 1 Mediatek | 1 Mediatek Chipset | 2026-08-03 | 5.5 Medium |
| In wifi, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10960006 / BORA00155314, BORA00155001, BORA00154907; Issue ID: MSV-7570. | ||||
| CVE-2026-8457 | 2 Wordpress, Wpweb | 2 Wordpress, Woocommerce Social Login | 2026-08-03 | 9.8 Critical |
| The WooCommerce - Social Login plugin for WordPress is vulnerable to Authentication Bypass in all versions up to and including 2.8.7. This is due to the plugin's Apple login handler accepting the Apple id_token and decoding only its base64 payload without verifying the JWT signature against Apple's public keys or validating the issuer, audience, or expiry claims, combined with the security nonce required to invoke the login flow being publicly exposed to unauthenticated users via a localized JavaScript object on the login page. This makes it possible for unauthenticated attackers to log in as any existing WordPress user — including administrators — by supplying a forged id_token whose payload contains the target user's email address, as that email is used without any role exclusion to resolve a WordPress account and immediately issue an authenticated session for it. | ||||
| CVE-2026-12696 | 2026-08-03 | 5.4 Medium | ||
| The wpForo Forum WordPress plugin before 3.1.2 does not sanitize and escape a user profile field before outputting it inside an HTML attribute on the public participant profile page, allowing users with a subscriber-level account to inject JavaScript that executes in the browser of any visitor who views the profile, including a logged-in administrator. | ||||
| CVE-2026-16091 | 2 Rubengc, Wordpress | 2 Gamipress – Gamification Plugin To Reward Points, Achievements, Badges & Ranks In Wordpress, Wordpress | 2026-08-03 | 6.4 Medium |
| The GamiPress – Gamification plugin to reward points, achievements, badges & ranks in WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'gamipress_rank' Shortcode in all versions up to, and including, 7.9.9.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-13596 | 2026-08-03 | 9.1 Critical | ||
| The Participants Database WordPress plugin before 2.7.8.4 does not properly sanitize and escape a user-supplied parameter before using it in a SQL query, allowing unauthenticated attackers to perform SQL injection attacks. | ||||
| CVE-2026-15234 | 2026-08-03 | 5.4 Medium | ||
| The Codeless Page Builder WordPress plugin through 1.1.4 does not sanitize or validate a shortcode attribute before using it as an HTML tag name when rendering content, allowing users with contributor-level access and above to inject arbitrary HTML and JavaScript that executes in the session of any higher-privileged user (such as an administrator) who views the content. | ||||
| CVE-2026-14292 | 2 Downloadmanager, Wordpress | 2 Download Manager, Wordpress | 2026-08-03 | 5.4 Medium |
| The Download Manager WordPress plugin before 3.3.66 does not properly escape a package's title before outputting it in the front-end package templates, allowing users with the Author role or above to store a title that results in arbitrary JavaScript execution in the browser of any user, including unauthenticated visitors, who views a page displaying the package. | ||||
| CVE-2026-12966 | 2026-08-03 | 5.3 Medium | ||
| The Direct Payments for WooCommerce WordPress plugin before 2.5.3 does not verify that the requester owns the targeted WooCommerce order in several unauthenticated AJAX handlers before changing its status and overwriting its payment metadata, allowing unauthenticated attackers to tamper with other customers' orders, including forging a "payment sent" state, overwriting the payment-method label, and attaching forged payment-proof files. | ||||
| CVE-2026-15262 | 2026-08-03 | 5.4 Medium | ||
| The Admin Columns for ACF Fields WordPress plugin through 0.3.2 does not escape Advanced Custom Fields values before outputting them in the WordPress admin list-table columns, allowing users with contributor-level access or above to store a payload that executes as JavaScript in the session of higher-privileged users who view the affected post-list screen. | ||||
| CVE-2025-15669 | 2 Bit Form, Wordpress | 2 Bit Form, Wordpress | 2026-08-03 | 4.8 Medium |
| The Bit Form WordPress plugin before 3.1.4 does not sanitise one of its conversational-form display settings before rendering it on the public-facing form, allowing high-privilege users (such as administrators, who do not hold the unfiltered_html capability on multisite) to store JavaScript that executes in the browser of any visitor who views the form. | ||||
| CVE-2026-64445 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth() OnAuth() has two bugs in the shared-key authentication path. When the Privacy bit is set, rtw_wep_decrypt() is called without verifying that the frame is long enough to contain a valid WEP IV and ICV. Inside rtw_wep_decrypt(), length is computed as: length = len - WLAN_HDR_A3_LEN - iv_len and then passed as (length - 4) to crc32_le(). If len is less than WLAN_HDR_A3_LEN + iv_len + icv_len (32 bytes), length - 4 is negative and, after the implicit cast to size_t, causes crc32_le() to read far beyond the frame buffer. Add a minimum length check before accessing the IV field and calling the decryption path. When processing a seq=3 response, rtw_get_ie() stores the Challenge Text IE length in ie_len, but the subsequent memcmp() always reads 128 bytes regardless of ie_len. IEEE 802.11 mandates a challenge text of exactly 128 bytes; reject any IE whose length field differs, matching the check already applied to OnAuthClient(). | ||||
| CVE-2026-64450 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix out-of-bounds read in broadcast Gap ACK blocks A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its data area. tipc_get_gap_ack_blks() only verifies that the record's len field is self-consistent with its ugack_cnt/bgack_cnt counts (sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check that the record actually fits in the message data area, msg_data_sz(). The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen) break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the returned size, so tipc_link_advance_transmq() copies the record off the receive skb with an attacker-controlled count: this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt), GFP_ATOMIC); A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its data area is short, carrying a Gap ACK record with len = 0x400, bgack_cnt = 0xff and ugack_cnt = 0. len then equals struct_size(p, gacks, 255), so the consistency check passes and ga is non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out of the much smaller skb: BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60 Read of size 1024 at addr ffff0000c7030d38 by task poc864/69 Call trace: kmemdup_noprof+0x48/0x60 tipc_link_advance_transmq+0x86c/0xb80 tipc_link_bc_ack_rcv+0x19c/0x1e0 tipc_bcast_sync_rcv+0x1c4/0x2c4 tipc_rcv+0x85c/0x1340 tipc_l2_rcv_msg+0xac/0x104 The buggy address belongs to the object at ffff0000c7030d00 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 56 bytes inside of allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0) The copied-out bytes are subsequently consumed as gap/ack values, but the read is already out of bounds at the kmemdup() regardless of how they are used. The unicast STATE path drops such a message: "if (glen > dlen) break;" skips the rest of STATE_MSG handling and the skb is freed. Make the broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record against msg_data_sz() and, when it does not fit, reports it back through tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than processed. ga is not cleared on this path: ga == NULL already means "legacy peer without Selective ACK", a distinct legitimate state. | ||||
| CVE-2026-64453 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: fix disconnect UAF in client teardown usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each auxiliary device. auxiliary_device_uninit() drops the device reference, and for an unbound child that can run usbio_auxdev_release() and free the containing struct usbio_client. list_for_each_entry_reverse() advances after the loop body by reading client->link.prev. If the current client is freed by auxiliary_device_uninit(), the iterator dereferences freed memory. Use list_for_each_entry_safe_reverse() so the previous client is cached before the body can drop the final reference. This preserves reverse teardown order while keeping the next iterator cursor independent of the current client's lifetime. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? usbio_disconnect+0x12e/0x150 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? usbio_disconnect+0x12e/0x150 kasan_report+0xe0/0x110 ? usbio_disconnect+0x12e/0x150 usbio_disconnect+0x12e/0x150 usb_unbind_interface+0xf3/0x400 really_probe+0x316/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0xea/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 ? usb_enable_lpm+0x3c/0x260 usb_set_configuration+0xb64/0xf20 usb_generic_driver_probe+0x5f/0x90 usb_probe_device+0x71/0x1b0 really_probe+0x46b/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? add_device_randomness+0xb7/0xf0 usb_new_device+0x492/0x870 hub_event+0x1b10/0x29c0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x187/0x300 ? process_one_work+0x475/0xb90 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||
| CVE-2026-64457 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio_pci: fix vq info pointer lookup via wrong index Unbinding a virtio balloon device: echo virtio0 > /sys/bus/virtio/drivers/virtio_balloon/unbind triggers a NULL pointer dereference. The dmesg says: BUG: kernel NULL pointer dereference, address: 0000000000000008 [...] RIP: 0010:__list_del_entry_valid_or_report+0x5/0xf0 Call Trace: <TASK> vp_del_vqs+0x121/0x230 remove_common+0x135/0x150 virtballoon_remove+0xee/0x100 virtio_dev_remove+0x3b/0x80 device_release_driver_internal+0x187/0x2c0 unbind_store+0xb9/0xe0 kernfs_fop_write_iter.llvm.11660790530567441834+0xf6/0x180 vfs_write+0x2a9/0x3b0 ksys_write+0x5c/0xd0 do_syscall_64+0x54/0x230 entry_SYSCALL_64_after_hwframe+0x29/0x31 [...] </TASK> The virtio_balloon device registers 5 queues (inflate, deflate, stats, free_page, reporting) but only the first two are unconditional. The stats, free_page and reporting queues are each conditional on their respective feature bits. When any of these features are absent, the corresponding vqs_info entry has name == NULL, creating holes in the array. The root cause is an indexing mismatch introduced when vq info storage was changed to be passed as an argument. vp_find_vqs_msix() and vp_find_vqs_intx() store the info pointer at vp_dev->vqs[i], where 'i' is the caller's sparse array index. However, the virtqueue itself gets vq->index assigned from queue_idx, a dense index that skips NULL entries. When holes exist, 'i' and queue_idx diverge. Later, vp_del_vqs() looks up info via vp_dev->vqs[vq->index] using the dense index into the sparsely-populated array, and hits NULL. Fix this by storing info at vp_dev->vqs[queue_idx] instead of vp_dev->vqs[i], so the store index matches the lookup index (vq->index). Apply the fix to both the MSIX and INTX paths. | ||||
| CVE-2026-64470 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free on marvell probe failure Make sure to stop any TX URBs submitted during Marvell OOB wakeup configuration on later probe failures to avoid use-after-free in the completion callback. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. | ||||