| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| PluXml CMS allows a user's session identifier to be set before authentication. The value of this session ID stays the same after authentication. This behaviour enables an attacker to fix a session ID
for a victim and later hijack the authenticated session.
The vendor was notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Only versions 5.8.21 and 5.9.0-rc7 were tested and confirmed as vulnerable, other versions were not tested and might also be vulnerable. |
| PluXml CMS is vulnerable to Stored XSS in Static Pages editing functionality. Attacker with editing privileges can inject arbitrary HTML and JS into website, which will be rendered/executed when visiting edited page.
The vendor was notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Only versions 5.8.21 and 5.9.0-rc7 were tested and confirmed as vulnerable, other versions were not tested and might also be vulnerable. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix read abandonment during retry
Under certain circumstances, all the remaining subrequests from a read
request will get abandoned during retry. The abandonment process expects
the 'subreq' variable to be set to the place to start abandonment from, but
it doesn't always have a useful value (it will be uninitialised on the
first pass through the loop and it may point to a deleted subrequest on
later passes).
Fix the first jump to "abandon:" to set subreq to the start of the first
subrequest expected to need retry (which, in this abandonment case, turned
out unexpectedly to no longer have NEED_RETRY set).
Also clear the subreq pointer after discarding superfluous retryable
subrequests to cause an oops if we do try to access it. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix possible wrong descriptor completion in llist_abort_desc()
At the end of this function, d is the traversal cursor of flist, but the
code completes found instead. This can lead to issues such as NULL pointer
dereferences, double completion, or descriptor leaks.
Fix this by completing d instead of found in the final
list_for_each_entry_safe() loop. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix kernel BUG in netfs_limit_iter() for ITER_KVEC iterators
When a process crashes and the kernel writes a core dump to a 9P
filesystem, __kernel_write() creates an ITER_KVEC iterator. This
iterator reaches netfs_limit_iter() via netfs_unbuffered_write(), which
only handles ITER_FOLIOQ, ITER_BVEC and ITER_XARRAY iterator types,
hitting the BUG() for any other type.
Fix this by adding netfs_limit_kvec() following the same pattern as
netfs_limit_bvec(), since both kvec and bvec are simple segment arrays
with pointer and length fields. Dispatch it from netfs_limit_iter() when
the iterator type is ITER_KVEC. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx: xdma: Fix regmap init error handling
devm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL.
Fix the error check and also fix the error message. Use the error code
from ERR_PTR() instead of the wrong value in ret. |
| A critical remote code execution vulnerability exists in the unauthenticated REST API endpoint /99/ImportSQLTable in H2O-3 version 3.46.0.9 and prior. The vulnerability arises due to insufficient security controls in the parameter blacklist mechanism, which only targets MySQL JDBC driver-specific dangerous parameters. An attacker can bypass these controls by switching the JDBC URL protocol to jdbc:postgresql: and exploiting PostgreSQL JDBC driver-specific parameters such as socketFactory and socketFactoryArg. This allows unauthenticated attackers to execute arbitrary code on the H2O-3 server with the privileges of the H2O-3 process. The issue is resolved in version 3.46.0.10. |
| A flaw was found in libsoup. When establishing HTTPS tunnels through a configured HTTP proxy, sensitive session cookies are transmitted in cleartext within the initial HTTP CONNECT request. A network-positioned attacker or a malicious HTTP proxy can intercept these cookies, leading to potential session hijacking or user impersonation. |
| A flaw was found in libsoup, a library for handling HTTP requests. This vulnerability, known as a Use-After-Free, occurs in the HTTP/2 server implementation. A remote attacker can exploit this by sending specially crafted HTTP/2 requests that cause authentication failures. This can lead to the application attempting to access memory that has already been freed, potentially causing application instability or crashes, resulting in a Denial of Service (DoS). |
| Discourse is an open-source discussion platform. In versions prior to 2026.1.4, 2026.3.1, 2026.4.1 and 2026.5.0-latest.1, a vulnerability in the discourse-subscriptions plugin allows users to gain access to subscription-gated groups without completing payment. This issue has been fixed in versions 2026.1.4, 2026.3.1, 2026.4.1 and 2026.5.0-latest.1. |
| A flaw was found in Corosync. An integer overflow vulnerability in Corosync's join message sanity validation allows a remote, unauthenticated attacker to send crafted User Datagram Protocol (UDP) packets. This can cause the service to crash, leading to a denial of service. This vulnerability specifically affects Corosync deployments configured to use totemudp/totemudpu mode. |
| A flaw was found in Corosync. A remote unauthenticated attacker can exploit a wrong return value vulnerability in the Corosync membership commit token sanity check by sending a specially crafted User Datagram Protocol (UDP) packet. This can lead to an out-of-bounds read, causing a denial of service (DoS) and potentially disclosing limited memory contents |
| A vulnerability was detected in Kilo-Org kilocode up to 7.0.47. This vulnerability affects the function Bun.file of the file packages/opencode/src/kilocode/review/worktree-diff.ts of the component File Diff API Endpoint. Performing a manipulation of the argument File results in path traversal. It is possible to initiate the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in Kilo-Org kilocode up to 7.0.47. This issue affects the function Load of the file packages/opencode/src/config/config.ts of the component Environment Variable Handler. Executing a manipulation of the argument KILO_CONFIG_CONTENT can lead to information disclosure. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Kitty is a cross-platform GPU based terminal. In versions 0.46.2 and below, the handle_compose_command() function in kitty/graphics.c performs bounds validation on composition offsets using unsigned 32-bit arithmetic that is subject to integer wrapping, potentially leading to Heap Buffer Over-Read/Write. An attacker who can write escape sequences to a kitty terminal (e.g., via a malicious file, SSH login banner, or piped content) can supply crafted x_offset/y_offset values that pass the bounds check after wrapping but cause massive out-of-bounds heap memory access in compose_rectangles(). No user interaction is required. No non-default configuration is required. The attacker only needs the ability to produce output in a kitty terminal window. This issue has been fixed in version 0.47.0. |
| WebdriverIO is a test automation framework for unit, e2e and component testing using WebDriver, WebDriver BiDi and Appium. Versions below 9.24.0 contain a command injection vulnerability leading to remote code execution (RCE) in test orchestration. Git permits branch names containing shell metacharacters, and getGitMetadataForAISelection() interpolates these names directly into execSync() calls without sanitization. An attacker can exploit this by supplying a malicious repository (via testOrchestrationOptions.runSmartSelection.source, or the current directory if unset) whose branch name carries a payload, causing the shell to execute arbitrary code. This enables remote code execution on CI/CD servers and developer machines, leading to credential and secret disclosure, source code and SSH key exfiltration, system compromise, and supply chain attacks via tampered build artifacts. The issue has been fixed in version 9.24.0. |
| A System Management Mode (SMM) handler could perform a callout to code located in non-SMM/untrusted memory. A highly privileged attacker could, with active user interaction and under high complexity and present preconditions, trigger execution of attacker-controlled code in SMM, potentially compromising the system’s confidentiality, integrity, and availability. |
| Grav is a file-based Web platform. In Grav 2.0.0-beta.2, a low-privileged authenticated API user with api.media.write can abuse /api/v1/blueprint-upload to write an arbitrary YAML file into user/accounts/, then log in as the newly created account with api.super privileges. This results in full administrative compromise of the Grav API. This vulnerability is fixed in API 1.0.0-beta.17. |
| An issue was discovered in the Portrait Dell Color Management application before 3.7.0 for Dell monitors. On Windows, a symbolic link vulnerability allows a local low-privileged user to escalate privileges to Administrator. During installation, the software writes the file CCFLFamily_07Feb11.edr to C:\ProgramData\Portrait Displays\CW\data\i1D3\ while running with elevated privileges. Because the installer does not properly validate symbolic links or reparse points at the destination path, an attacker can create a malicious link that redirects the write operation to an arbitrary system location, enabling arbitrary file creation or overwrite with elevated privileges. |
| Mitigation bypass in the DOM: Security component. This vulnerability was fixed in Firefox 151, Firefox ESR 140.11, Thunderbird 151, and Thunderbird 140.11. |
