| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Use irq_work to start GP in tiny SRCU
Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(),
which acquires the workqueue pool->lock.
This causes a lockdep splat when call_srcu() is called with a scheduler
lock held, due to:
call_srcu() [holding pi_lock]
srcu_gp_start_if_needed()
schedule_work() -> pool->lock
workqueue_init() / create_worker() [holding pool->lock]
wake_up_process() -> try_to_wake_up() -> pi_lock
Also add irq_work_sync() to cleanup_srcu_struct() to prevent a
use-after-free if a queued irq_work fires after cleanup begins.
Tested with rcutorture SRCU-T and no lockdep warnings.
[ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work
to start process_srcu()" ] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix double free related to rereg_user_mr
If IB_MR_REREG_TRANS is set during rereg_user_mr, the
umem will be released and a new one will be allocated
in irdma_rereg_mr_trans. If any step of irdma_rereg_mr_trans
fails after the new umem is allocated, it releases the umem,
but does not set iwmr->region to NULL. The problem is that
this failure is propagated to the user, who will then call
ibv_dereg_mr (as they should). Then, the dereg_mr path will
see a non-NULL umem and attempt to call ib_umem_release again.
Fix this by setting iwmr->region to NULL after ib_umem_release.
Fixed: 5ac388db27c4 ("RDMA/irdma: Add support to re-register a memory region") |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, a Time-of-Check-to-Time-of-Use (TOCTOU) race condition exists during addon installation. When a user installs an addon through the SandMan interface, UpdUtil.exe is spawned as SYSTEM by SbieSvc but stages files in the user-writable %TEMP%\sandboxie-updater directory. After UpdUtil verifies file hashes against the signed addon manifest, install.bat extracts files.cab and executes config.exe from its contents. Between hash verification and extraction, an unprivileged user can replace files.cab with a crafted cabinet containing a malicious executable, which is then run as SYSTEM. No UAC prompt is required.
This issue has been fixed in version 1.17.3. |
| Traccar is an open source GPS tracking system. In org.traccar:traccar versions starting at 6.11.1 before 6.13.0, the KML and GPX export functionality writes device names to XML output without proper escaping. An attacker with low privileges can create a device with a crafted name that injects XML content into exported files. If another user exports and opens the affected KML or GPX file, this can corrupt the file structure and spoof exported location data. This issue is fixed in version 6.13.0. |
| OpenClaw before 2026.4.9 contains an authentication bypass vulnerability allowing untrusted workspace plugins to be auto-enabled during non-interactive onboarding when provider auth choices are shadowed. Attackers can exploit this by crafting malicious workspace plugins that are automatically selected and enabled during authentication setup without explicit user consent. |
| OpenClaw before 2026.4.10 contains an arbitrary file read vulnerability in QQBot media tags that allows attackers to reference host-local paths outside the intended media storage boundary. Attackers can craft malicious reply text containing media tags to disclose arbitrary local files through outbound media handling. |
| OpenClaw before 2026.4.14 contains a server-side request forgery vulnerability in browser SSRF policy that allows private-network navigation by default. Attackers can exploit this misconfiguration to access internal services or metadata endpoints through browser-driven requests. |
| A weakness has been identified in EFM ipTIME C200 up to 1.092. This vulnerability affects the function sub_408F90 of the file /cgi/iux_set.cgi of the component ApplyRestore Endpoint. This manipulation of the argument RestoreFile causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Form Maker by 10Web – Mobile-Friendly Drag & Drop Contact Form Builder plugin for WordPress is vulnerable to SQL Injection via the 'inputs' parameter in versions up to, and including, 1.15.42 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| A flaw has been found in UsamaK98 python-notebook-mcp up to a05a232815809a7e425b5fa7be26e0d4369894c2. Impacted is the function create_notebook/read_notebook/edit_cell/add_cell of the file server.py. This manipulation causes path traversal. It is possible to initiate the attack remotely. The exploit has been published and may be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. |
| WordPress Plugin Backup Migration 1.2.8 contains an information disclosure vulnerability that allows unauthenticated attackers to download complete database backups by accessing predictable file paths. Attackers can enumerate backup directories through configuration files and complete logs, then construct direct download URLs to retrieve sensitive backup archives containing full database dumps. |
| The Geeky Bot plugin for WordPress is vulnerable to Missing Authorization in versions up to, and including, 1.2.2. This is due to a nopriv AJAX route allowing attacker-controlled model/function dispatch and reaching a plugin installer helper that downloads and unzips attacker-supplied ZIP files into wp-content/plugins/. This makes it possible for unauthenticated attackers to perform arbitrary plugin installation and achieve remote code execution. |
| OpenClaw versions from 2026.2.22 before 2026.4.12 contain an insufficient shell-wrapper detection vulnerability allowing attackers to inject environment variable assignments at the argv level. Attackers can bypass exec preflight handling to manipulate high-risk shell variables like SHELLOPTS and PS4, affecting execution semantics and security controls. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator
When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send()
appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via
nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put()
helper only zeroes alignment padding after the payload, not the payload
itself, so four bytes of stale kernel heap data are leaked to userspace
in the NLMSG_DONE message body.
Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes
the nfgenmsg payload via nfnl_fill_hdr(), consistent with how
__build_packet_message() already constructs NFULNL_MSG_PACKET headers. |
| The WP-Clippy plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's `clippy` shortcode in all versions up to, and including, 1.0.0. This is due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Blog Settings plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'page' parameter in all versions up to, and including, 1.0. This is due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The Loco Translate plugin for WordPress is vulnerable to Path Traversal in all versions up to, and including, 2.8.2 via the `fsReference` AJAX route. This is due to the `findSourceFile()` method normalizing user-supplied `ref` paths containing `../` directory traversal sequences without validating that the resolved path remains within the intended bundle or content directory. This makes it possible for authenticated attackers, with Translator-level access and above (custom `loco_admin` capability required, granted to the `translator` role and administrators by default), to read arbitrary `.php`, `.js`, `.json`, and `.twig` files from the server filesystem outside the intended translation directory. Files named wp-config.php are excluded. |
| A security vulnerability has been detected in Open5GS up to 2.7.7. Affected by this issue is the function udm_nudm_uecm_handle_amf_registration_update of the file /src/udm/nudm-handler.c of the component amf-3gpp-access Endpoint. The manipulation leads to denial of service. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Nginx UI is a web user interface for the Nginx web server. Prior to version 2.3.8, an authenticated user can call GET /api/settings and retrieve sensitive configuration values, including node.secret. The same node.secret is accepted by AuthRequired() through the X-Node-Secret header (or node_secret query parameter), causing the request to be treated as authenticated via the trusted-node path and associated with the init user. This issue has been patched in version 2.3.8. |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.0, SuppressedError allows attackers to escape the sandbox and run arbitrary code. This issue has been patched in version 3.11.0. |
