| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in Shibby Tomato 1.28. This vulnerability affects the function sub_42537C of the component Scheduler Name Handler. The manipulation of the argument a1 results in stack-based buffer overflow. It is possible to launch the attack remotely. This project is superseded by FreshTomato. |
| dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, any authenticated API user who has their own access token can ask the collection API to evaluate permissions as a different user by supplying `user_email`. If the target user has collections, this can expose those collections through the API. In V4, once a collection id is known, the same controller also offers `add_item` and `remove_item` routes without any object-level `authorize!` checks,
creating a likely cross-user modification path. This is patched in version 26.06.08. |
| SurrealDB before 1.0.1 sets default table permissions to FULL instead of NONE, allowing SELECT, CREATE, UPDATE, and DELETE operations on tables without explicit permissions. Attackers with database access or unauthenticated users on publicly exposed instances can perform unrestricted operations on unprotected tables within their authorization scope. |
| Rust OneNote File Parser is a parser for Microsoft OneNote files implemented in Rust. Prior to version 1.1.1, a maliciously crafted `.onetoc2` table-of-contents file can cause `Parser::parse_notebook` to open arbitrary files on the host filesystem outside the notebook's directory. The parser reads entry names listed inside the `.onetoc2` and joins them against the notebook's base directory without validating that they are relative paths confined to that directory. The parser will bail out when the target file fails to parse as a OneNote section, so direct content exfiltration through the parser's return value is not practical, though file-existence probing and denial-of-service via large or special files remain possible. Anyone using `onenote_parser` to parse .onetoc2 files received from untrusted sources is affected. Users who only ever parse their own notebooks are not at meaningful risk. The issue is fixed in onenote_parser 1.1.1. The fix rejects absolute paths, parent-directory components, and other invalid path characters in entry names, and additionally canonicalises the resolved path to confirm it stays inside the notebook's base directory. For users who cannot upgrade to 1.1.1, only call `Parser::parse_notebook` on `.onetoc2` files from trusted sources. Alternatively, use `Parser::parse_section` / `Parser::parse_section_buffer` on individual .one files, which do not perform the directory walk. |
| Pi.Alert is a WIFI / LAN intruder detector with web service monitoring. From 2024-06-29 to before 2026-05-07, the web application endpoint is vulnerable to SQL injection. The /pialert/php/server/devices.php route accepts requests from unauthenticated users when the action URL parameter is set to getDevicesTotals. The scansource URL parameter is then injected in a SQL query. This vulnerability is fixed in 2026-05-07. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Prior to version 4.14.5, issues in the Cluster Distributed API (DAPI) handling allow a cluster peer, or any actor able to authenticate to the cluster channel using the shared cluster key, to make the master node deserialize an attacker-controlled callable and execute it under an attacker-controlled RBAC context. The cluster code in `framework/wazuh/core/cluster/common.py` deserializes JSON with `as_wazuh_object()`, which resolves any callable whose top-level package is wazuh or api (an overly broad allowlist controlled only by `ALLOWED_CALLABLES_PACKAGES`), and DAPI requests handled in framework/wazuh/core/cluster/dapi/dapi.py accept a client-supplied rbac_permissions value that `run_local()` applies as the global RBAC context, so supplying an rbac_mode of black causes authorization checks for expose_resources-protected functions to pass without any legitimate permission assignment. Combined, these allow privileged administrative actions on the master node such as arbitrary file writes under WAZUH_PATH, creation of new API users, and tampering with security.yaml, and can be chained into full manager compromise. This issue has been fixed in version 4.14.5. |
| SurrealDB before 1.5.5 (and 2.0.0-beta before 2.0.0-beta.3) accepts an arbitrary object in the signin and signup operations of the RPC API without recursively validating it for non-computed values. When a record access method defines a SIGNIN or SIGNUP query and the RPC API is exposed to untrusted users, an unauthenticated attacker can encode a binary object containing a subquery using the bincode serialization format and supply it in place of credentials. The subquery is then executed within the database owner's SIGNIN/SIGNUP query under a system user session with the editor role, allowing the attacker to select, create, update, and delete non-IAM resources (though not view the query results directly, and not affect IAM resources, which require the owner role). |
| SurrealDB versions before 1.1.0 fail to properly parse the ID, DB, and NS headers in HTTP REST API requests containing special characters. Unauthenticated attackers can send crafted HTTP requests with malformed header values to trigger an uncaught exception that crashes the server. |
| SurrealDB before 2.2.2 with scripting enabled fails to properly enforce recursion limits when native functions contain embedded JavaScript that issues new queries. Authenticated attackers can bypass the recursion limit by chaining native and JavaScript function calls to trigger infinite recursion and exhaust server memory. |
| Due to a missing sanitization call in [`afsql_dd_run_query`](https://github.com/syslog-ng/syslog-ng/blob/649e6e18e3459fb4467000a88dfb12fa97f9719c/modules/afsql/afsql.c#L219), syslog-ng before 4.12 are vulnerable to SQL injection from an untrusted source. This is not part of the default configuration, the SQL driver has to be manually configured.
Fixes are in syslog-ng 4.12, syslog-ng Premium Edition 8.2 and syslog-ng Store Box 7.8 |
| CI4MS is a CodeIgniter 4-based content management system skeleton. Prior to version 0.31.9.0, the Fileeditor module enforces an extension allowlist (`['css','js','html','txt','json','sql','md']`) on content-write operations (`saveFile`, `createFile`), but two destructive endpoints — `deleteFileOrFolder` and `renameFile` — never validate the extension of the *source* path. A backend user with file-editor permissions can therefore unlink or rename any file inside the project root that is not explicitly listed in the small `$hiddenItems` blocklist. Critical framework files such as `app/Config/Routes.php`, `app/Config/App.php`, `app/Config/Database.php`, `app/Config/Filters.php`, `public/index.php`, and `public/.htaccess` all live outside that blocklist and can be destroyed, producing a persistent denial of service that requires filesystem-level redeployment to recover. Version 0.31.9.0 patches the issue. |
| Parsec is a cloud-based application for simple and cryptographically secure file sharing. The application does not sanitize the workspace name, creating a vulnerability if that workspace name is a UNC path. When creating mountpoint in the windows filesystem to mount the workspace of an organization, the application does not sanitize the workspace name. The cause issue if the workspace name evaluate to a UNC path since it's allowed for the name to containt `\` char. If the UNC path is invalid (or the targeted resource is not available) the application become unresponsive otherwise the system will interact with the mounted UNC path allowing the attacker to retrieve to [`NTLM`] hash. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: dualpi2: fix GSO backlog accounting
When DualPI2 splits a GSO skb into N segments, it propagates N
additional packets to its parent before returning NET_XMIT_SUCCESS.
The parent then accounts for the original skb once more, leaving its
qlen one larger than the number of packets actually queued.
With QFQ as the parent, after all real packets are dequeued, QFQ still
has a non-zero qlen while its in-service aggregate has no active
classes. qfq_choose_next_agg() returns NULL and qfq_dequeue() passes
the result to qfq_peek_skb(), causing a NULL pointer dereference.
Follow the same pattern used by tbf_segment() and taprio: count only
successfully queued segments, propagate the difference between the
original skb and those segments, and return NET_XMIT_SUCCESS whenever
at least one segment was queued. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock
l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for
pending_rx_work. process_pending_rx() takes the same mutex, so teardown
can deadlock against the worker it is flushing.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the l2cap_conn_ready() -> queue_work(...,
&conn->pending_rx_work) submit path, the l2cap_conn_del() ->
cancel_work_sync(&conn->pending_rx_work) teardown path, and the
process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep
WARNING: possible circular locking dependency detected
process_pending_rx+0x21/0x2a [vuln_msv]
l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv]
*** DEADLOCK ***
Cancel pending_rx_work before taking conn->lock, matching the existing
lock-before-drain ordering used for the two delayed works in the same
teardown path. The pending_rx queue is still purged after the work has
been cancelled and conn->lock has been acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: fix hardware state machine corruption in error path
A severe livelock and subsequent Hung Task panic were observed in the
i2c-i801 driver during concurrent Fuzzing. The crash is caused by an
unconditional hardware register cleanup in the error handling path of
i801_access().
When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus
controller is actively used by BIOS/ACPI), the kernel does not actually
acquire the hardware ownership. However, the code jumps to the 'out'
label and executes:
iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
This forcefully clears the INUSE_STS lock and resets the hardware status
flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI
transactions and totally corrupts the SMBus hardware state machine.
Consequently, all subsequent i801_access() calls fail at the pre-check
stage, triggering an endless stream of "SMBus is busy, can't use it!"
error logs. Over a slow serial console, this printk flood monopolizes
the CPU (Console Livelock), starving other processes trying to acquire
the mmap_lock down_read semaphore, ultimately triggering the hung task
watchdog.
Fix this by moving the 'out' label below the hardware register cleanup.
If i801_check_pre() fails, we safely bypass the iowrite8() and only
release the software locks (pm_runtime and mutex), strictly adhering to
the rule of not releasing resources that were never acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: stub: Reject I2C block transfers with invalid length
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: team: fix NULL pointer dereference in team_xmit during mode change
__team_change_mode() clears team->ops with memset() before restoring
safe dummy handlers via team_adjust_ops(). A concurrent team_xmit()
running under RCU on another CPU can read team->ops.transmit during
this window and call a NULL function pointer, crashing the kernel.
The race requires a mode change (CAP_NET_ADMIN) concurrent with
transmit on the team device.
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: 0010 [#1] SMP KASAN NOPTI
RIP: 0010:0x0
Call Trace:
team_xmit (drivers/net/team/team_core.c:1853)
dev_hard_start_xmit (net/core/dev.c:3904)
__dev_queue_xmit (net/core/dev.c:4871)
packet_sendmsg (net/packet/af_packet.c:3109)
__sys_sendto (net/socket.c:2265)
The original code assumed that no ports means no traffic, so mode
changes could freely memset()/memcpy() the ops. AF_PACKET with
forced carrier breaks that assumption.
Prevent the race instead of making it safe: replace memset()/memcpy()
with per-field updates that never touch transmit or receive. Those
two handlers are managed solely by team_adjust_ops(), which already
installs dummies when tx_en_port_count == 0 (always true during mode
change since no ports are present). WRITE_ONCE/READ_ONCE prevent
store/load tearing on the handler pointers.
synchronize_net() before exit_op() drains in-flight readers that may
still reference old mode state from before port removal switched the
handlers to dummies. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix race between dump and ip_set_list resize
The release path of ip_set_dump_do() and ip_set_dump_done() read
inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw()
of the array pointer. These run from netlink_recvmsg() without the nfnl
mutex and without an RCU read-side critical section.
A concurrent ip_set_create() can grow the array: it publishes the new
array, calls synchronize_net() and then kvfree()s the old one. Since the
dump paths read the array outside any RCU reader, synchronize_net() does
not wait for them and the old array can be freed while they still index
into it, causing a use-after-free.
The dumped set itself stays pinned via set->ref_netlink, so only the
array load needs protecting. Take rcu_read_lock() around it, matching
ip_set_get_byname() and __ip_set_put_byindex().
BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
Read of size 8 at addr ffff88800b5c4018 by task exploit/150
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
netlink_dump (net/netlink/af_netlink.c:2325)
netlink_recvmsg (net/netlink/af_netlink.c:1976)
sock_recvmsg (net/socket.c:1159)
__sys_recvfrom (net/socket.c:2315)
...
Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7]
RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698)
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink()
rmnet_dellink() removes the endpoint from the hash table with
hlist_del_init_rcu() and then immediately frees it with kfree(). However,
RCU readers on the receive path (rmnet_rx_handler ->
__rmnet_map_ingress_handler) may still hold a reference to the endpoint and
dereference ep->egress_dev after the memory has been freed. The endpoint is
a kmalloc-32 object, and the stale read at offset 8 corresponds to the
egress_dev pointer.
BUG: unable to handle page fault for address: ffffffffde942eef
Oops: 0002 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY
RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27)
Call Trace:
<TASK>
__rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101)
rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6096)
__netif_receive_skb_one_core (net/core/dev.c:6208)
netif_receive_skb (net/core/dev.c:6467)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2003)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
</TASK>
Add an rcu_head field to struct rmnet_endpoint and replace kfree() with
kfree_rcu() so the endpoint memory remains valid through the RCU grace
period. Also remove the rmnet_vnd_dellink() call and inline only the
nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set
ep->egress_dev to NULL during the grace period, creating a data race
with lockless readers. |
