| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: entry: Avoid unnecessary local_irq_disable() on kernel exit
Currently, when exiting to kernel mode, we attempt involuntary
preemption. The preemption logic expects IRQs to be disabled, which is
why we call local_irq_disable() before attempting preemption.
However, depending on the context, local_irq_disable() may be
unnecessary:
- __el1_irq(), the non-NMI EL1 IRQ path, already has IRQs disabled, so
local_irq_disable() is redundant.
- irqentry_exit_to_kernel_mode_preempt() immediately returns when
exiting from an NMI-like context, so calling local_irq_disable()
beforehand is unnecessary work.
Furthermore, it confuses the pNMI state tracking when we are in a
context with interrupts disabled and the GIC_PRIO_PSR_I_SET bit is set
in the PMR, leading to a warning when
CONFIG_ARM64_DEBUG_PRIORITY_MASKING=y:
WARNING: ./arch/arm64/include/asm/irqflags.h:63 at arm64_exit_to_kernel_mode+0xb8/0xc0, CPU#40: retsnoop/31805
CPU: 40 UID: 0 PID: 31805 Comm: retsnoop Not tainted 7.2.0-rc6-next-20260805 #7 PREEMPTLAZY
pstate: 234013c9 (nzCv DAIF +PAN -UAO +TCO +DIT +SSBS BTYPE=--)
pc : arm64_exit_to_kernel_mode (arch/arm64/kernel/entry-common.c:63)
lr : el1_abort (arch/arm64/kernel/entry-common.c:323)
pmr: 000000f0
Call trace:
arm64_exit_to_kernel_mode (arch/arm64/kernel/entry-common.c:63) (P)
el1_abort (arch/arm64/kernel/entry-common.c:323)
el1h_64_sync_handler (arch/arm64/kernel/entry-common.c:449)
el1h_64_sync (arch/arm64/kernel/entry.S:589)
[...]
Split arm64_exit_to_kernel_mode() into preempt, non-preempt, and
dispatch parts so that we can avoid this extra work where it is not
needed and avoid breaking the pNMI tracking logic. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5-ppl: fix use-after-free in ppl_do_flush()
The loop in ppl_do_flush() continues iterating after calling
ppl_io_unit_finished(), touching io->pending_flushes and leading to a
use-after-free.
Add a break statement to stop the loop once io is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: RSI: fix field-spanning write warning in attestation token init
The challenge is passed in registers a1 through a8. However, copying to
®s.a1 makes FORTIFY treat the destination as the single a1 field,
resulting in a field-spanning write warning. [1]
Overlay the SMCCC register structure with an RSI-specific argument
layout and copy the challenge into an explicit 64-byte array. This keeps
the existing a1-a8 argument encoding while giving the copy a correctly
sized destination object.
[1]
memcpy: detected field-spanning write (size 64) of single field "®s.a1" at ./arch/arm64/include/asm/rsi_cmds.h:119 (size 8)
WARNING: ./arch/arm64/include/asm/rsi_cmds.h:119 at rsi_attestation_token_init+0xdc/0xf8 [arm_cca_guest], CPU#0: cat/3314 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: purge async notifications upon nic error
This fixes a kernel panic in reconfig failure:
1. we have a BSS connection
2. we have a NAN connection
3. FW error occurs
4. reconfig restores the BSS connection
5. however, restoring the NAN connection fails due to a FW error.
6. erroneously, ieee80211_handle_reconfig_failure is called and marks all
interfaces as not-in-driver (will be fixed in a different patch).
7. mac80211 frees the links of the BSS connection but doesn't tell the
driver about that, as it thinks that this vif is not in the driver.
8. in ieee80211_stop_device, *ALL* wiphy works are getting flushed
(erroneously?)
9. Therefore, async_handlers_wk is being executed, processing the
statistics notification that was received after we restored the BSS
connection.
10. the notification handler dereferences fw_id_to_bss_conf[id], which is
now a dangling pointer, as mac80211 already freed this link in (7).
11. On the first access to one of the links fields, we panic.
While this can and should be fixed by removing the call to
ieee80211_handle_reconfig_failure in (6), it is also not a good idea to
carry and maybe handle notifications from a dead FW.
We do purge the notifications when we stop the FW, but in reconfig
failure we stop the FW too late, after the notifications are processed.
In addition, async_handlers_wk can always be scheduled before the
reconfig work.
Purge the notifications immediately when transport notifies about a nic
error. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: use copy-on-write RCU updates in ip6_mc_source()
pmc->sflist is read locklessly under rcu_read_lock() by
inet6_mc_check() during packet reception in the UDP and RAW
multicast receive paths.
ip6_mc_source() mutated psl->sl_addr and psl->sl_count in-place
when adding or removing a source filter. Additionally, when expanding
the filter buffer, newpsl was published via rcu_assign_pointer()
before writing the new source into the array.
Because 16-byte struct in6_addr writes are not atomic and array
shifting is not synchronized with RCU readers, concurrent readers in
inet6_mc_check() could read torn IPv6 addresses or observe
duplicated/missed source entries.
Fix this by switching ip6_mc_source() to copy-on-write RCU updates:
allocate and fully populate newpsl before publishing it via
rcu_assign_pointer(), and reclaim the old filter via kfree_rcu(),
matching ip6_mc_msfilter().
Also remove the now unused IP6_SFBLOCK macro. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: oa_tc6: Improve the error recovery
When oversubscribed traffic causes lot of buffer overflow errors,
probably due to loss of data chunks, driver fails to find a
data chunk with end_valid bit set, before it runs out of sk buffer
space. As a result, assert is seen during skb_put.
Now, check is made if skb buffer has enough tailroom for the
incoming data before accepting. If there is no room, current
frame is abandoned and it will start looking for a data chunk
with start_valid bit, that is a new frame.
SK buffer allocation error is considered as recoverable error.
rx_buf_overflow flag is too specific and no longer the only
condition this flag is used for. Therefore it is renamed as
wait_until_start_valid. This is more appropriate as this flag
is used to look for the next data chunk with SV bit set, after
failures like buffer overflow, buffer allocation failure, skb pointer
validity besides buffer overflow error.
Not writing to status0 if it reads 0. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-62062. Reason: This candidate is a reservation duplicate of CVE-2026-62062. Notes: All CVE users should reference CVE-2026-62062 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: rate limit unmapped SID errors
A client can include many structurally valid but unmapped SIDs in a DACL.
Logging every mapping failure lets one request generate hundreds of kernel
error messages.
Rate limit the message to prevent an authenticated client from flooding
the kernel log. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF
snd_pcm_hw_params() and snd_pcm_hw_free() guard buffer reallocation
with an mmap_count check performed under the PCM stream lock, but the
lock is released long before the buffer is actually freed:
snd_pcm_sync_stop(), constraint refinement and do_free_pages() all
happen in between. snd_pcm_mmap_data(), on the other hand, takes no
lock at all: it validates against the old buffer's state and
dma_bytes, remaps its pages into the VMA, and only then increments
mmap_count.
A concurrent mmap() can therefore slip in between the check and the
free. remap_pfn_range() installs writable PTEs for the old buffer's
pages without taking page references, and the subsequent
do_free_pages() returns those pages to the page allocator while the
VMA still maps them. This leaves a stale, writable mapping of freed
pages: a page-level use-after-free that can be leveraged for local
privilege escalation.
Make snd_pcm_mmap_data() participate in the buffer-access scheme
introduced for hw_params/hw_free: acquire runtime->buffer_accessing
before validating and remapping, and release it afterwards. Buffer
reallocation already fails with -EBUSY while accessors are active,
and the mmap side now fails with -EBUSY while a reallocation is in
progress, so the validate/remap sequence and the check/free sequence
can no longer interleave.
A reproducer that turns this race into a stale writable mapping of
the freed DMA buffer pages is available on request. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: break unbuffered write when netfs_alloc_subrequest() fails
syzbot reported a null-ptr-deref below [1] following a fault injection in
netfs_alloc_subrequest(). [0]
When netfs_alloc_subrequest() fails, subreq is NULL.
Later, netfs_prepare_write() tries to initialize members of
subreq(e.g., source), the issue in [1] is triggered.
Let's handle the error of netfs_prepare_write() properly.
[0]
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
Call Trace:
netfs_alloc_subrequest+0x116/0x3f0
netfs_prepare_write+0x76/0x7b0
netfs_unbuffered_write+0x75c/0x2020
netfs_unbuffered_write_iter_locked+0x7d6/0xa80
netfs_unbuffered_write_iter+0x442/0x720
v9fs_file_write_iter+0xbf/0x100
vfs_write+0x6ac/0x1050
[1]
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:netfs_prepare_write+0xbc/0x7b0 fs/netfs/write_issue.c:173
Call Trace:
netfs_unbuffered_write+0x75c/0x2020 fs/netfs/direct_write.c:111
netfs_unbuffered_write_iter_locked+0x7d6/0xa80 fs/netfs/direct_write.c:290
netfs_unbuffered_write_iter+0x442/0x720 fs/netfs/direct_write.c:382
v9fs_file_write_iter+0xbf/0x100 fs/9p/vfs_file.c:409
new_sync_write fs/read_write.c:595 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del()
vxlan_mdb_is_valid_source(), which validates MDBE_ATTR_SOURCE and every
MDBE_ATTR_SRC_LIST member, accepts the all-zeros address.
A source list is only accepted on a (*, G) entry, whose source is the
all-zeros address, and for each member of the list an (S, G) entry is
derived from it by substituting the source. Entries are keyed by a plain
memcmp() of struct vxlan_mdb_entry_key, so if MDBE_ATTR_SOURCE is present
and holds the all-zeros address and the source list holds it as well, the
derived (S, G) key is byte-identical to the (*, G) key and resolves to the
same entry. Omitting MDBE_ATTR_SOURCE is not equivalent, as the key is
then left with a zero address family.
vxlan_mdb_remote_src_del() removes the forwarding entry of a source before
freeing the source entry:
vxlan_mdb_remote_src_fwd_del(vxlan, group, remote, &ent->addr);
vxlan_mdb_remote_src_entry_del(ent);
With the keys aliased, the first call deletes the remote of the entry that
owns 'ent' instead of a separate (S, G) entry, and frees 'ent'. The second
call then runs on the freed entry, and its hlist_del() reads ->pprev and
->next out of it and writes through them.
Adding the (*, G) entry with NLM_F_REPLACE and no source list marks the
all-zeros source for deletion and reaches this from the sweep at the end
of vxlan_mdb_remote_srcs_replace().
BUG: KASAN: slab-use-after-free in __vxlan_mdb_add+0x1cd/0xd70
Read of size 8 at addr ffff888102852500 by task poc/84
__vxlan_mdb_add+0x1cd/0xd70
vxlan_mdb_add+0xc0/0x140
rtnl_mdb_add+0x157/0x2a0
rtnetlink_rcv_msg+0x207/0x5a0
Allocated by task 84:
__kmalloc_cache_noprof+0x153/0x360
vxlan_mdb_remote_srcs_add+0x2eb/0x440
__vxlan_mdb_add+0x803/0xd70
Freed by task 84:
kfree+0x14c/0x3b0
vxlan_mdb_remote_del+0x129/0x1a0
__vxlan_mdb_del+0x4f/0xe0
vxlan_mdb_remote_src_fwd_del.isra.0+0x162/0x1b0
__vxlan_mdb_add+0x1c5/0xd70
The MDB operations are netns-scoped, so an unprivileged user can perform
them in a new user and network namespace.
Reject the all-zeros address in vxlan_mdb_is_valid_source(), which covers
both call sites. A (*, G) entry is expressed by omitting the source, so
nothing legitimate is refused.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration
sctp_verify_asconf() walks ASCONF-ACK parameters with
sctp_walk_params(), which advances by SCTP_PAD4(length), while the
consumer sctp_get_asconf_response() iterates the same parameters
advancing by the raw length, without padding. A single odd-length
parameter desynchronises the two walks and makes the consumer
interpret attacker-controlled bytes at a misaligned offset.
When those bytes yield a length of zero, the while loop over
asconf_ack_len makes no progress, spinning forever in softirq
context, and the watchdog reports a soft lockup. All reads stay
within the received skb, so the lockup is a pure remote denial of
service. A remote peer can trigger it with a crafted ASCONF-ACK on
an ADD-IP enabled association with an outstanding ASCONF (RFC 5061
section 4.1.2 requires the chunk to be authenticated, but the
predefined empty key id 0 allows the peer to compute the same
association HMAC from publicly exchanged parameters, so the gate
does not help).
The SCTP_PARAM_ERR_CAUSE case of sctp_verify_asconf() also performs
no length check, letting a parameter without a complete error
header reach the consumer, which reads errhdr.cause past the end of
the parameter, an out-of-bounds read.
Reject SCTP_PARAM_ERR_CAUSE parameters shorter than
sizeof(struct sctp_addip_param) + sizeof(struct sctp_errhdr) at the
verifier, and advance the consumer iterator with the same padding
rule as the verifier to keep the two walks in lockstep. The verifier
change guarantees a complete error header in every ERR_CAUSE
parameter the consumer can see, so the consumer's asconf_ack_len
check is dropped and it returns err_param->cause directly. The
consumer padding fix is still required because odd lengths remain
valid for SCTP_PARAM_ERR_CAUSE per RFC 5061.
The issue was found by ZeroHive, a vulnerability hunting agent at
Tencent Yunding Lab. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for zero range
When FALLOC_FL_ZERO_RANGE is used without FALLOC_FL_KEEP_SIZE,
smb3_zero_range() may extend EOF without checking RLIMIT_FSIZE, allowing
the file to grow beyond the caller's file-size limit.
Fix this by calling inode_newsize_ok() before sending the zero-range
request when the operation would extend EOF.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072
truncate -s 2M "$FILE"
fallocate --zero-range -o 0 -l 4M "$FILE"
echo "fallocate rc=$?"
stat -c "file size=%s" "$FILE"
'
Before this change, the operation succeeds despite the 3 MiB limit:
fallocate rc=0
file size=4194304
After this change, fallocate fails and leaves the file at 2 MiB. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START
The SCTP_CMD_TIMER_START handler checks timer_pending() before calling
timer_reduce(). The timer can expire and detach between these operations,
causing timer_reduce() to rearm the timer without taking the association
reference required for the newly armed timer.
The timer callback later unconditionally drops its association reference,
which can leave the association reference count unbalanced and result in
use-after-free during association teardown.
Use the return value of timer_reduce() to determine whether the timer was
actually armed. Take the association reference only when timer_reduce()
successfully starts a new timer, closing the race between checking the
timer state and rearming it.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: leave HasEA flag untouched on setxattr failure
In ntfs_set_ea(), the exit path unconditionally updates the HasEA
flag based on ea_info_qsize. When an error occurs before
ea_info_qsize is updated, NInoClearHasEA() hides existing on-disk
EAs until the inode is evicted.
Only update the flag on success. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3: Manage teardown with devm
arm_smmu_device_remove() manually frees the IOPF queue, destroys the
vmid_map and disables the device, while the IRQs and queues are devm
managed. devm unwinds only after remove() returns, so the cleanup runs
in the wrong order. The IOPF queue is freed before the event-queue IRQ
whose handler uses it.
Manage all of it with devm so the unwind order is correct. Free the IOPF
queue and vmid_map via devm actions, and disable the device from one
registered after arm_smmu_device_reset().
This is also a prerequisite for fixing a Tegra241 CMDQV CMD_SYNC
use-after-free in the subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Zero rpc_gss_wire_cred at svcauth_gss_decode_credbody() entry
svcauth_gss_decode_credbody() writes the caller's
rpc_gss_wire_cred field by field and assigns gc_ctx.len only on
the success tail. The caller storage is svcdata->clcred, which
lives in the per-svc_rqst gss_svc_data and is reused across
requests. Early decode failures leave partially decoded state
mixed with residue from the prior request.
The trailing body_len tightness check is the sharpest case:
xdr_stream_decode_opaque_inline() has already written gc_ctx.data
with a borrowed inline pointer into the current request's XDR
pages, but gc_ctx.len retains its prior value. Once the request
pages are released the pooled clcred carries a dangling pointer
paired with a stale length.
Zero the caller's rpc_gss_wire_cred at function entry so that
every early-return path leaves a deterministic all-zero cred.
On the trailing tightness-check path, gc_ctx.len is now zero
instead of stale, which neuters length-driven consumers such as
gss_svc_searchbyctx() that would otherwise walk the dangling
data pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: initialize DRC hash table before registering shrinker
shrinker_register() precedes the INIT_LIST_HEAD loop and the
drc_hashsize store. On weakly-ordered architectures (arm64, ppc),
a shrinker scan can observe drc_hashsize before the bucket list
heads are initialized, causing a NULL deref in the DRC shrinker
callback.
Move bucket initialization and the drc_hashsize store before
shrinker_register() so the hash table is fully initialized before
it becomes visible to the shrinker. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: guard nfsd_serv deref in nfsd_file_net_dispose
nfsd_file_net_dispose() is the consumer side of l->freeme: the nfsd
service thread loop calls it to drain entries that the filecache
garbage collector and shrinker append via
nfsd_file_dispose_list_delayed(). During per-net teardown,
nn->nfsd_serv is cleared before the filecache laundrette is shut
down, so the service thread can still run a dispose pass that finds
more than eight entries on l->freeme and dereferences a NULL
svc_serv:
nfsd service thread loop
nfsd_file_net_dispose(nn)
if (!list_empty(&l->freeme)) {
...
svc_wake_up(nn->nfsd_serv); /* nn->nfsd_serv == NULL */
}
The sibling helper nfsd_file_dispose_list_delayed() already documents
this ordering and caches nn->nfsd_serv into a local before testing it
for NULL. nfsd_file_net_dispose() was introduced with the same raw
svc_wake_up(nn->nfsd_serv) call and never picked up the guard.
Fix by loading nn->nfsd_serv into a local svc_serv pointer and only
calling svc_wake_up() when it is non-NULL, matching the pattern in
nfsd_file_dispose_list_delayed(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()
usbg_make_tpg() held dep_lock while calling
configfs_depend_item_unlocked(), which acquires the configfs root
inode lock when operating across subsystems. This creates a circular
lock dependency with configfs_rmdir():
dep_lock -> configfs root inode lock -> su_mutex -> dep_lock
In usbg_make_tpg(), dep_lock only serialized the read of opts->ready,
which is a monotonic flag that transitions from false to true exactly
once (in tcm_set_name()) and never reverts. Remove dep_lock from
usbg_make_tpg() entirely and use READ_ONCE/WRITE_ONCE to access
opts->ready locklessly instead. |
