| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A reachable assertion vulnerability exists in the Matter SDK (connectedhomeip) before 1.4.2, specifically within the Level Control cluster's periodic server tick logic. When a MoveToLevel command is sent and immediately followed by a write of OperationMode=2 (in the Pump Configuration and Control cluster), the server tick function violates the assertion `currentLevel < maxLevel`, resulting in a crash. This can be exploited remotely without authentication to cause denial of service. Affected versions include 1.3 and 1.4 (commit ab3d5ae). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
cifs_try_adding_channels() iterates ses->iface_list with
list_for_each_entry_safe_from(), which captures the next entry
(niface) under iface_lock. The loop body then drops iface_lock for
the whole duration of cifs_ses_add_channel().
A concurrent interface refresh (SMB3_request_interfaces() ->
parse_server_interfaces()) marks all ifaces inactive and removes and
frees any that are not re-advertised via list_del() + kref_put(),
where release_iface() is a bare kfree(). Since niface typically has
no channel holding a reference, the list reference is its last and it
can be freed inside the unlocked window. On continue, the iterator
advance step then dereferences niface->iface_head.next, and the loop
body reads iface->rdma_capable/is_active, both on freed memory.
Fix this by never keeping an unreferenced list pointer across the
unlocked window. Each channel attempt now re-scans the list from the
head under iface_lock, takes a kref on the selected candidate, and
passes only that referenced candidate to cifs_ses_add_channel().
weight_fulfilled still tracks selection progress, so restarting the
scan preserves the original weighted distribution and the
weight_fulfilled-before-kref_put ordering on the failure path.
Add a per-pass attempts cap so a flapping interface refresh cannot
keep the inner loop spinning within a single tries increment. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix rlist race and missing initialization
TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next
and ->prev to NULL instead of pointing to itself, making list_empty()
always return false and list_add() dereference a NULL ->prev pointer.
Also, cifs_signal_cifsd_for_reconnect() can be called concurrently
from multiple cifsd threads, allowing the same server's rlist node to
be added twice into the local list, corrupting it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Restore HMM_PFN_WRITE check in ODP write paths
Commit 0b261d7c1cd3 ("RDMA/rxe: Break endless pagefault loop for RO
pages") dropped the access permission test from rxe_check_pagefault()
and left only HMM_PFN_VALID. A page faulted in read-only, for example
a page-cache folio behind a PROT_READ file mapping, then satisfies the
check and ODP write operations (RDMA WRITE, RDMA READ response, SEND
payload, atomics) modify it through kmap without ever breaking CoW.
An unprivileged user can register an ODP MR over such a mapping and
have incoming RDMA traffic overwrite the page cache of a file it only
holds O_RDONLY, including /etc/passwd or setuid binaries. This is the
same primitive class as Dirty COW and CVE-2022-2590.
mlx5 has the missing invariant: its ODP path sets the device write bit
only for pfns that carry HMM_PFN_WRITE. Restore it in rxe by requiring
HMM_PFN_WRITE in rxe_check_pagefault() for every operation except
RXE_PAGEFAULT_RDONLY. A write to a non-writable VMA now fails the one
fault attempt with -EPERM from hmm_vma_fault() instead of re-faulting
forever. For a writable VMA the fault breaks CoW and the write lands
in the private page.
Keep pmem flushes on the read-only check. arch_wb_cache_pmem() never
modifies memory, and the FLUSH access bits do not make the umem
writable, so classifying flushes as writes would make every flush
against a flush-only MR fail. |
| Smarty before 4.5.8 and 5.x before 5.8.5 contains a code injection vulnerability where the top-level nocache_hash is never restored during extends:/multi-component template inheritance, leaving it null. Attackers can supply assigned data containing a forged SmartyNocache marker that is copied verbatim into the regenerated PHP cache file, executing arbitrary PHP on include for remote code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too. |
| Information leak in SVG in Google Chrome prior to 154.0.8037.97 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: avoid socket lock inversion in listener cleanup
rfcomm_sock_cleanup_listen() closes unaccepted child sockets through
rfcomm_sock_close(), which takes the child socket lock before
rfcomm_dlc_close() acquires rfcomm_mutex. The RFCOMM worker takes these
locks in reverse order while handling connections and DLC state changes,
so lockdep reports a possible deadlock.
Close dequeued children without taking their socket lock. The accept queue
owns a reference to each child, and bt_accept_dequeue() locks the child
while unlinking it and clearing its parent pointer.
Dropping the child lock makes it important to prevent a concurrent
rfcomm_connect_ind() from enqueueing a new child after cleanup observes an
empty queue. Set a listening socket to BT_CLOSED while its lock is still
held, before dropping the lock and draining the queue. The state check in
rfcomm_connect_ind() then rejects new children once cleanup starts. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: get the wiphy out of a dying network namespace
When a network namespace is destroyed, cfg80211_pernet_exit() moves any
wiphy back to the initial namespace, and just warns if that fails. But
moving an interface can fail (due to allocation failures), and then the
wiphy is left behind with a garbage netns pointer:
Kernel mode fault at addr 0x30
genlmsg_multicast_netns.constprop.0+0x46/0xcf [cfg80211]
nl80211_notify_wiphy+0xcd/0xe8 [cfg80211]
wiphy_unregister+0x169/0x3fc [cfg80211]
Note that commit debac3a20dec ("net: Remove conflicting altnames for
dying netns in __dev_change_net_namespace().") fixed another path
that could reach it without allocation failures.
Remove interfaces that cannot be moved instead of failing the switch,
so that the wiphy always ends up in the initial namespace. In this
case the netdev core will unregister the interfaces anyway. |
| Path traversal vulnerability in the Satel Iberia SenNet Datalogger Serie 200, specifically in the web portal provided by the device, which allows an authenticated user to read any file or list any directory accessible to the system user running the web server. This is possible by modifying the URL to include a path traversal payload. Successful exploitation of this vulnerability could allow an attacker to access critical system files containing confidential information. |
| A remote code execution vulnerability exists in Zimbra Collaboration (ZCS) before 10.1.20 when the optional zimbra-snmp package is installed and SNMP notifications are enabled. Due to improper sanitization of untrusted input during SNMP notification processing, an unauthenticated attacker can send specially crafted SMTP requests that may result in execution of arbitrary operating system commands as the Zimbra user. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs
Fix several related bounds checking and pointer lifecycle issues in
receive_encrypted_standard()'s handling of compound encrypted frames:
- Clear next_buffer after assigning it to server->bigbuf. A stale
next_buffer pointer can lead to a use-after-free on subsequent
error paths.
- Update pdu_length to the decrypted plaintext size (buf_size). Using
the pre-decryption length allows NextCommand to point into stale
ciphertext residue.
- Reject next_cmd values smaller than MID_HEADER_SIZE(server).
- Fix an integer overflow in the upper bound check by verifying
pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the
trailing slice is large enough for a header. |
| The OMGF | GDPR/DSGVO Compliant, Faster Google Fonts. Easy. plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 's' Search Parameter via comments-atom Feed in all versions up to, and including, 6.3.10 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires that the front-end server serves the retained .tmp file without a Content-Type or X-Content-Type-Options header, enabling MIME-sniffing browsers such as Chromium to execute the injected script — a condition present by default on many Apache and nginx/php-fpm deployments. |
| This vulnerability exists in the ERP system due to unsafe deserialization of user controlled data in the affected functionality. An unauthenticated remote attacker could exploit this vulnerability by supplying specially crafted data to the vulnerable functionality of the targeted system.
Successful exploitation of this vulnerability could allow the attacker to execute arbitrary code, manipulate application data or perform other unintended actions on the targeted system. |
| This vulnerability exists in the ERP system due to insufficient validation and parameterization of user supplied input in an API endpoint. An unauthenticated remote attacker could exploit this vulnerability by supplying specially crafted input to the vulnerable endpoint.
Successful exploitation of this vulnerability could allow the attacker to perform SQL injection attacks on the targeted system. |
| A flaw was found in pulp-ansible's bearer-token refresh for collection remotes. The access token is kept in one module-level variable and reused for every token download in that worker. A user who can sync an Ansible remote that uses token refresh, and can point that remote at a server they control, receives an access token obtained for a different remote, and can reuse it at the service that issued it. Content stored in Pulp is not changed, and the service is not stopped. |
| A flaw was found in pulp-container when it authenticates to an upstream registry. Basic and bearer credentials from one remote are reused for later downloads in the same worker. A user who can sync a container remote, and can point that remote at a server they control, receives the username, password, or bearer token stored for a different remote, and can reuse that credential at the upstream registry. Content stored in Pulp is not changed, and the service is not stopped. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in Themekraft BuddyForms buddyforms allows PHP Local File Inclusion.This issue affects BuddyForms: from n/a through 2.10.2. |
| This vulnerability exists in the ERP system due to improper validation of payment callback parameters and inadequate authentication controls in API endpoint. An unauthenticated remote attacker could exploit this vulnerability by manipulating the parameter to cause the application to establish an authenticated session for an arbitrary user without valid payment verification.
Successful exploitation of this vulnerability could allow the attacker to bypass authentication and gain unauthorized access to other user accounts on the targeted system. |
| MCMS 6.1.1 through 6.2.1 has a SQL injection vulnerability in the custom model/form import feature. |
