| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| If errors returned from MarshalJSON methods contain user controlled data, they may be used to break the contextual auto-escaping behavior of the html/template package, allowing for subsequent actions to inject unexpected content into templates. |
| c-ares is an asynchronous resolver library. From 1.32.3 through 1.34.4, there is a use-after-free in read_answers() when process_answer() may re-enqueue a query either due to a DNS Cookie Failure or when the upstream server does not properly support EDNS, or possibly on TCP queries if the remote closed the connection immediately after a response. If there was an issue trying to put that new transaction on the wire, it would close the connection handle, but read_answers() was still expecting the connection handle to be available to possibly dequeue other responses. In theory a remote attacker might be able to trigger this by flooding the target with ICMP UNREACHABLE packets if they also control the upstream nameserver and can return a result with one of those conditions, this has been untested. Otherwise only a local attacker might be able to change system behavior to make send()/write() return a failure condition. This vulnerability is fixed in 1.34.5. |
| A vulnerability was identified in the email parsing library due to improper handling of specially formatted recipient email addresses. An attacker can exploit this flaw by crafting a recipient address that embeds an external address within quotes. This causes the application to misdirect the email to the attacker's external address instead of the intended internal recipient. This could lead to a significant data leak of sensitive information and allow an attacker to bypass security filters and access controls. |
| If kdcproxy receives a request for a realm which does not have server addresses defined in its configuration, by default, it will query SRV records in the DNS zone matching the requested realm name. This creates a server-side request forgery vulnerability, since an attacker could send a request for a realm matching a DNS zone where they created SRV records pointing to arbitrary ports and hostnames (which may resolve to loopback or internal IP addresses). This vulnerability can be exploited to probe internal network topology and firewall rules, perform port scanning, and exfiltrate data. Deployments where
the "use_dns" setting is explicitly set to false are not affected. |
| The net/http package improperly accepts a bare LF as a line terminator in chunked data chunk-size lines. This can permit request smuggling if a net/http server is used in conjunction with a server that incorrectly accepts a bare LF as part of a chunk-ext. |
| A flaw was found in Tempo Operator, where it creates a ServiceAccount, ClusterRole, and ClusterRoleBinding when a user deploys a TempoStack or TempoMonolithic instance. This flaw allows a user with full access to their namespace to extract the ServiceAccount token and use it to submit TokenReview and SubjectAccessReview requests, potentially revealing information about other users' permissions. While this does not allow privilege escalation or impersonation, it exposes information that could aid in gathering information for further attacks. |
| A flaw was found in the Tempo Operator. When the Jaeger UI Monitor Tab functionality is enabled in a Tempo instance managed by the Tempo Operator, the Operator creates a ClusterRoleBinding for the Service Account of the Tempo instance to grant the cluster-monitoring-view ClusterRole.
This can be exploited if a user has 'create' permissions on TempoStack and 'get' permissions on Secret in a namespace (for example, a user has ClusterAdmin permissions for a specific namespace), as the user can read the token of the Tempo service account and therefore has access to see all cluster metrics. |
| File::Find::Rule through 0.34 for Perl is vulnerable to Arbitrary Code Execution when `grep()` encounters a crafted filename.
A file handle is opened with the 2 argument form of `open()` allowing an attacker controlled filename to provide the MODE parameter to `open()`, turning the filename into a command to be executed.
Example:
$ mkdir /tmp/poc; echo > "/tmp/poc/|id"
$ perl -MFile::Find::Rule \
-E 'File::Find::Rule->grep("foo")->in("/tmp/poc")'
uid=1000(user) gid=1000(user) groups=1000(user),100(users) |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Starting in version 0.3.2 and prior to versions 0.3.8, 0.4.19, and 0.5.6, there is a possibility for denial of service by memory exhaustion in `net-imap`'s response parser. At any time while the client is connected, a malicious server can send can send highly compressed `uid-set` data which is automatically read by the client's receiver thread. The response parser uses `Range#to_a` to convert the `uid-set` data into arrays of integers, with no limitation on the expanded size of the ranges. Versions 0.3.8, 0.4.19, 0.5.6, and higher fix this issue. Additional details for proper configuration of fixed versions and backward compatibility are available in the GitHub Security Advisory. |
| A flaw was found in linux-pam. The pam_namespace module may improperly handle user-controlled paths, allowing local users to exploit symlink attacks and race conditions to elevate their privileges to root. This CVE provides a "complete" fix for CVE-2025-6020. |
| A flaw was found in Keycloak's OIDC component in the "checkLoginIframe," which allows unvalidated cross-origin messages. This flaw allows attackers to coordinate and send millions of requests in seconds using simple code, significantly impacting the application's availability without proper origin validation for incoming messages. |
| Issue summary: Checking excessively long invalid RSA public keys may take
a long time.
Impact summary: Applications that use the function EVP_PKEY_public_check()
to check RSA public keys may experience long delays. Where the key that
is being checked has been obtained from an untrusted source this may lead
to a Denial of Service.
When function EVP_PKEY_public_check() is called on RSA public keys,
a computation is done to confirm that the RSA modulus, n, is composite.
For valid RSA keys, n is a product of two or more large primes and this
computation completes quickly. However, if n is an overly large prime,
then this computation would take a long time.
An application that calls EVP_PKEY_public_check() and supplies an RSA key
obtained from an untrusted source could be vulnerable to a Denial of Service
attack.
The function EVP_PKEY_public_check() is not called from other OpenSSL
functions however it is called from the OpenSSL pkey command line
application. For that reason that application is also vulnerable if used
with the '-pubin' and '-check' options on untrusted data.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| jackson-core contains core low-level incremental ("streaming") parser and generator abstractions used by Jackson Data Processor. In versions prior to 2.15.0, if a user parses an input file and it has deeply nested data, Jackson could end up throwing a StackoverflowError if the depth is particularly large. jackson-core 2.15.0 contains a configurable limit for how deep Jackson will traverse in an input document, defaulting to an allowable depth of 1000. jackson-core will throw a StreamConstraintsException if the limit is reached. jackson-databind also benefits from this change because it uses jackson-core to parse JSON inputs. As a workaround, users should avoid parsing input files from untrusted sources. |
| Moby is an open-source project created by Docker for software containerization. A security vulnerability has been detected in certain versions of Docker Engine, which could allow an attacker to bypass authorization plugins (AuthZ) under specific circumstances. The base likelihood of this being exploited is low.
Using a specially-crafted API request, an Engine API client could make the daemon forward the request or response to an authorization plugin without the body. In certain circumstances, the authorization plugin may allow a request which it would have otherwise denied if the body had been forwarded to it.
A security issue was discovered In 2018, where an attacker could bypass AuthZ plugins using a specially crafted API request. This could lead to unauthorized actions, including privilege escalation. Although this issue was fixed in Docker Engine v18.09.1 in January 2019, the fix was not carried forward to later major versions, resulting in a regression. Anyone who depends on authorization plugins that introspect the request and/or response body to make access control decisions is potentially impacted.
Docker EE v19.03.x and all versions of Mirantis Container Runtime are not vulnerable.
docker-ce v27.1.1 containes patches to fix the vulnerability. Patches have also been merged into the master, 19.03, 20.0, 23.0, 24.0, 25.0, 26.0, and 26.1 release branches. If one is unable to upgrade immediately, avoid using AuthZ plugins and/or restrict access to the Docker API to trusted parties, following the principle of least privilege. |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| Improper input validation in UEFI firmware CseVariableStorageSmm for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. |
| A flaw was found in the cookie parsing logic of the libsoup HTTP library, used in GNOME applications and other software. The vulnerability arises when processing the expiration date of cookies, where a specially crafted value can trigger an integer overflow. This may result in undefined behavior, allowing an attacker to bypass cookie expiration logic, causing persistent or unintended cookie behavior. The issue stems from improper validation of large integer inputs during date arithmetic operations within the cookie parsing routines. |
| A Local Privilege Escalation (LPE) vulnerability was found in libblockdev. Generally, the "allow_active" setting in Polkit permits a physically present user to take certain actions based on the session type. Due to the way libblockdev interacts with the udisks daemon, an "allow_active" user on a system may be able escalate to full root privileges on the target host. Normally, udisks mounts user-provided filesystem images with security flags like nosuid and nodev to prevent privilege escalation. However, a local attacker can create a specially crafted XFS image containing a SUID-root shell, then trick udisks into resizing it. This mounts their malicious filesystem with root privileges, allowing them to execute their SUID-root shell and gain complete control of the system. |
| A flaw was found in 389-ds-base. A specially-crafted LDAP query can potentially cause a failure on the directory server, leading to a denial of service |
| A privilege escalation from host to domain vulnerability was found in the FreeIPA project. The FreeIPA package fails to validate the uniqueness of the `krbCanonicalName` for the admin account by default, allowing users to create services with the same canonical name as the REALM admin. When a successful attack happens, the user can retrieve a Kerberos ticket in the name of this service, containing the admin@REALM credential. This flaw allows an attacker to perform administrative tasks over the REALM, leading to access to sensitive data and sensitive data exfiltration. |
