| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Versions of the package jsrsasign from 7.0.0 and before 11.1.1 are vulnerable to Incomplete Comparison with Missing Factors via the getRandomBigIntegerZeroToMax and getRandomBigIntegerMinToMax functions in src/crypto-1.1.js; an attacker can recover the private key by exploiting the incorrect compareTo checks that accept out-of-range candidates and thus bias DSA nonces during signature generation. |
| Versions of the package jsrsasign before 11.1.1 are vulnerable to Infinite loop via the bnModInverse function in ext/jsbn2.js when the BigInteger.modInverse implementation receives zero or negative inputs, allowing an attacker to hang the process permanently by supplying such crafted values (e.g., modInverse(0, m) or modInverse(-1, m)). |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound root directory content to block size
__tb_property_parse_dir() does not check that content_offset +
content_len fits within block_len for the root directory case.
When rootdir->length equals or exceeds block_len - 2, the entry
loop reads past the allocated property block.
Add a bounds check after computing content_offset and content_len
to reject directories whose content extends past the block. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size
[Why & How]
During HDCP 2.x repeater authentication over HDMI, the driver reads the
sink's RxStatus register and extracts a 10-bit message size field (max
value 1023). This value is used as the read length for the ReceiverID
list without being clamped to the size of the destination buffer
rx_id_list[177]. A malicious HDMI repeater could advertise a message
size larger than the buffer, causing an out-of-bounds write during the
I2C read.
Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the
rx_id_list buffer, matching the approach already used in the DP branch.
(cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: use correct flags for device private PMD entry
Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support
device-private entries") updated set_pmd_migration_entry() to use
pmdp_huge_get_and_clear() in the softleaf case, but made no further
adjustments to the function itself.
Therefore this function continues to incorrectly use pmd_write(),
pmd_soft_dirty() and pmd_uffd_wp() to determine whether the installed
migration entry should be marked writable, softdirty or uffd-wp
respectively.
Whilst all are incorrect, the most problematic of these is pmd_write(), as
this can lead to corrupted rmap state.
On x86-64 _PAGE_SWP_SOFT_DIRTY is aliased to _PAGE_RW. So calling
pmd_write() on a softleaf will return the softdirty state encoded in the
entry, assuming CONFIG_MEM_SOFT_DIRTY was enabled.
This was observed when running the hmm.hmm_device_private.anon_write_child
selftest:
1. The test faults in a range then migrates it such that a device-private
THP range is established.
2. The parent then migrates it to a device-private writable PMD entry whose
folio is entirely AnonExclusive with entire_mapcount=1, softdirty set
(accidentally correct write state).
3. The parent forks and the PMD entries are set to device-private read only
entries, entire_mapcount=2, softdirty still set.
4. [BUG] The child writes to the range then migrates to RAM - intending to
install non-writable migration entries - but replacing parent and child
PMD mappings with WRITABLE entries due to misinterpreting the softdirty
bit.
5. In remove_migration_pmd(), if !softleaf_is_migration_read(entry) we
set the RMAP_EXCLUSIVE flag when calling folio_add_anon_rmap_pmd() for
both parent and child, which are therefore AnonExclusive.
6. [SPLAT] Child sets migrated folio entire_mapcount=1, parent sets
entire_mapcount=2 and we end up with an AnonExclusive folio with
entire_mapcount=2! Assert fires in __folio_add_anon_rmap():
VM_WARN_ON_FOLIO(folio_test_large(folio) &&
folio_entire_mapcount(folio) > 1 &&
PageAnonExclusive(cur_page), folio)
This patch fixes the issue by correctly referencing the softleaf entry
fields for writable, softdirty and uffd-wp in set_pmd_migration_entry().
It also only updates A/D flags if the entry is present as these are
otherwise not meaningful for a softleaf entry.
This patch also flips the if (!present) { ... } else { ... } logic in
set_pmd_migration_entry() so it is easier to understand, and adds some
comments to make things clearer.
I was able to bisect this to commit 775465fd26a3 ("lib/test_hmm: add zone
device private THP test infrastructure") which first exposes this bug as
it was the commit that permitted test_hmm to generate the test.
However commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support
device-private entries") is the commit that actually enabled this
behaviour. |
| SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, SiYuan Note's kernel HTTP server unconditionally trusts all chrome-extension:// origins, granting RoleAdministrator access to every installed browser extension without any authentication. Combined with the default empty AccessAuthCode on desktop installs, any Chrome/Chromium extension -- including a compromised legitimate extension via supply chain attack -- can make fully authenticated admin API calls to the SiYuan kernel at 127.0.0.1:6806, enabling data exfiltration, stored XSS injection, and configuration tampering. This vulnerability is fixed in 3.7.0. |
| Rclone is a command-line program to sync files and directories to and from different cloud storage providers. From 1.46.0 until 1.74.3, rclone rcd --rc-serve accepts unauthenticated GET and HEAD requests to paths of the form: /[remote:path]/object. The remote value is parsed from the URL and passed to normal backend initialization. Inline remote configuration can set backend options that execute local commands during initialization. As a result, a single unauthenticated GET or HEAD request can execute a command as the rclone process user. This vulnerability is fixed in 1.74.3. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix global performance monitor reference counting
In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on
the perfmon it returns, but v3d_perfmon_set_global_ioctl() and
v3d_perfmon_delete() fail to release that reference on several paths:
1. v3d_perfmon_set_global_ioctl() leaks the reference on its error
paths.
2. CLEAR_GLOBAL leaks both the find reference and the reference
previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl
that configured it.
3. Destroying a perfmon that is the current global perfmon leaks the
reference stashed by the SET_GLOBAL ioctl.
Release each of these references explicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11
The v11 MQD manager incorrectly assigned the CP-compute variants of
checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions
use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct
v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow.
During CRIU checkpoint of an SDMA queue on Navi3x:
- checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer,
leaking 1536 bytes of adjacent GTT memory to userspace
During CRIU restore:
- restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer,
corrupting 1536 bytes of adjacent GTT memory (often the ring buffer
or neighboring MQDs)
This is a copy-paste regression unique to v11. All other ASIC backends
(cik, vi, v9, v10, v12) correctly use the SDMA-specific variants.
Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly
handle the smaller v11_sdma_mqd structure, matching the pattern used in
other MQD managers.
(cherry picked from commit 6fa41db7ffdec97d62433adf03b7b9b759af8c2c) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix NULL dereference in get_queue_ids()
When usr_queue_id_array is NULL and num_queues is non-zero,
get_queue_ids() returns NULL. The callers check only IS_ERR() on the
return value; since IS_ERR(NULL) == false the check passes, and
suspend_queues() calls q_array_invalidate() which immediately
dereferences NULL while iterating num_queues times.
Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying
num_queues > 0 with a zero queue_array_ptr, causing a kernel panic.
A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op
(q_array_invalidate never executes, and resume_queues already guards
all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL)
only when num_queues is non-zero and the pointer is absent; both callers
already propagate IS_ERR() returns correctly to userspace.
(cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4) |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/xe: Skip exec queue schedule toggle if queue is idle during suspend"
This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6.
The idle-skip optimization bypasses GuC suspend, so the GPU may not
perform the context switch that flushes TLB entries for invalidated
userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB
invalidation and page faults during userptr invalidation tests.
Restore unconditional schedule toggling on suspend so the context-switch
TLB flush is always performed.
This optimization will be reintroduced with a fix that does not skip
suspend in LR/preempt-fence VM mode.
(cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170) |
| An attacker can send a web request that causes unlimited memory
allocation in the internal web server, leading to a denial of service.
The internal web server is disabled by default. |
| A vulnerability in Apache Kvrocks.
This issue affects Apache Kvrocks: from 2.2.0 through 2.15.0.
Users are recommended to upgrade to version 2.16.0, which fixes the issue. |
| Relative Path Traversal vulnerability in Apache Kvrocks.
This issue affects Apache Kvrocks: from 1.0.0 through 2.15.0.
Users are recommended to upgrade to version 2.16.0, which fixes the issue. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 8.3 before 18.11.6, 19.0 before 19.0.3, and 19.1 before 19.1.1 that under certain conditions could have allowed an authenticated user with maintainer-role permissions to make requests to internal network resources through mirror synchronization due to improper URL validation. |
| SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, the /api/icon/getDynamicIcon endpoint is explicitly excluded from authentication in SiYuan's kernel router (router.go, "不需要鉴权" -- no auth needed). When called with type=8 and a valid block id parameter, this endpoint invokes RenderDynamicIconContentTemplate, which executes a Go template that includes the querySQL and queryBlocks functions. These functions run arbitrary SELECT statements against the SiYuan SQLite database. An unauthenticated network-adjacent attacker who knows a valid block ID can exfiltrate all user note content, tags, asset references, and block attributes from the database. This vulnerability is fixed in 3.7.0. |
| SiYuan is an open-source personal knowledge management system. Prior to 3.7.0, SiYuan contains a stored cross-site scripting (XSS) vulnerability in the Attribute View (database) asset cell renderer that escalates to remote code execution (RCE) in the Electron desktop client. This vulnerability is fixed in 3.7.0. |
| Unauthenticated Cross Site Scripting (XSS) in Royal Elementor Addons Pro < 1.7.1041 versions. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in StylemixThemes Motors allows PHP Local File Inclusion.
This issue affects Motors: from n/a through 1.4.109. |
| Missing Authorization in the server management routes (routes/admin.php) in Azuriom Azuriom CMS before 1.2.11 on all platforms allows an authenticated attacker with the admin.access permission to create AzLink server tokens and take over non-admin user accounts by changing their passwords and email addresses via crafted HTTP requests to /admin/servers/create and the AzLink API endpoints (/api/azlink/password, /api/azlink/email, /api/azlink/user/{id}). |
