Export limit exceeded: 20874 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397900 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98021 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: reject oversized tx_queue_len at netlink parse time rtnl_create_link() assigns IFLA_TXQLEN directly to dev->tx_queue_len without going through netif_change_tx_queue_len(), so a device created with "ip link add ... txqueuelen 500000" bypasses the S16_MAX cap and still triggers the oversized ring allocations in pfifo_fast, tun and tap. The veth peer nest (rtnl_nla_parse_ifinfomsg()) and the RTM_NEWLINK-on-existing-device path reach the same sinks. Enforce the cap in ifla_policy instead: IFLA_TXQLEN becomes NLA_POLICY_FULL_RANGE(NLA_U32, &txqlen_range) with txqlen_range = { .min = 0, .max = S16_MAX }. All netlink consumers parse against this policy - rtnl_setlink(), rtnl_newlink() (create and change), and the veth peer nest - so every netlink path is capped at parse time and rejects the attribute with -ERANGE plus a proper "integer out of range" extack message before any device state is modified (the RTM_SETLINK half-application wart is gone with it). Document the bound in the rt-link.yaml netlink spec. Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y. - Unprivileged user in a fresh user+net namespace (unshare -Urn): ip link add v0 txqueuelen 500000 type veth peer name v1 -> on the fixed kernel this is rejected with -ERANGE ("integer out of range" extack) instead of installing an oversized tx_queue_len that later inflates pfifo_fast/tun/tap ring allocations. - ip link set v0 txqueuelen 500000 is likewise rejected at parse time. | ||||
| CVE-2026-98020 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: fix cmd_regs access racing BAR unmap on reset pdsc_reset_prepare() and pdsc_reset_done()'s pdsc_map_bars() error path clear/iounmap cmd_regs without devcmd_lock, and pdsc_legacy_firmware_update()'s download loop derefs cmd_regs after dropping and retaking the lock without re-checking. An FLR concurrent with a devlink flash can unmap cmd_regs under an in-flight devcmd, causing a NULL deref or a write to unmapped MMIO. Take devcmd_lock across the BAR unmap/remap, and re-check cmd_regs in the download loop. Only the PF maps cmd_regs and runs devcmd, so skip the unmap on a VF, as pdsc_remove() and pdsc_reset_done() already do. A reset that completes entirely within the unlocked window is not a correctness problem for the image: the device clears its update session, so a resumed download is rejected, and it verifies the staged image before writing a flash slot, reporting PDS_RC_BAD_FW rather than activating it. pdsc_unmap_bars() also clears info_regs, intr_status and intr_ctrl. The interrupt and start/stop readers of those are quiesced before the unmap by pdsc_fw_down(), which frees the interrupts and tears down the queues. The debugfs readers are not, since those files outlive a reset; that is pre-existing and out of scope here. | ||||
| CVE-2026-98019 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: mark a NULL call argument precise check_func_arg() allows bpf_register_is_null() for nullable arguments w/o marking the underlying scalar register precise. Hence a checkpoint created on such a path would prune against arbitrary scalar value. check_helper_call() enforces second parameter of the bpf_get_local_storage() to be zero, w/o marking the underlying scalar register precise. Hence a checkpoint created on such a path would prune against arbitrary scalar value. Grouping these two into one patch, as they share the same fixes tag. | ||||
| CVE-2026-98018 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mctp: i3c: serialize probe with bus removal mctp_i3c_probe() drops busdevs_lock after finding the matching bus. A concurrent I3C_NOTIFY_BUS_REMOVE can then unregister and free the bus netdev before probe passes its private data to mctp_i3c_add_device(). The latter consequently adds a list node through a freed mbus pointer. Keep busdevs_lock held until the device has been added. This also satisfies the __must_hold annotation on mctp_i3c_add_device(). | ||||
| CVE-2026-98017 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: defer qdisc freeing after failed creation An RTM_NEWQDISC request can make clsact bind a populated shared ingress block during ->init(), publishing an embedded mini_Qdisc to lockless readers. If the same request has an invalid TCA_RATE, estimator setup fails after ->init(); the unwind removes the pointer but synchronously frees its containing qdisc while tc_run() may still hold it. Retire failed qdiscs through the same RCU helper as normal destruction. Inline the synchronous free into the callback now that no direct callers remain. | ||||
| CVE-2026-98016 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free race in sample_restore_put() Concurrent teardown of TC sample rules sharing the same restore context may re-read restore->count after dropping restore_lock. At that point another thread may already have completed cleanup and freed the restore object. Use the result of the refcount decrement while holding restore_lock to determine whether cleanup is needed. | ||||
| CVE-2026-98015 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put In mlx5_eswitch_termtbl_put(), the zero-ref cleanup check reads tt->ref_count after termtbl_mutex has been released. Two concurrent callers on the same mlx5_termtbl_handle race: one decrements ref_count to zero, removes the hash entry, and calls kfree(tt) while the other has already dropped the mutex and is about to evaluate if (!tt->ref_count), producing a use-after-free. Fix this by capturing the result of the decrement into a stack-local last variable before dropping the mutex. The cleanup decision is now made entirely under termtbl_mutex, and tt is not touched after kfree. | ||||
| CVE-2026-98014 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, prevent mc_list repopulation during vport disable In mlx5_esw_vport_disable(), move esw_apply_vport_rx_mode() ahead of esw_vport_change_handle_locked() so vport->allmulti_rule is NULL before the change handler observes it. During FW-fatal recovery the disable runs while dev->state == INTERNAL_ERROR. The promisc query inside esw_update_vport_rx_mode() fails and returns early, leaving vport->allmulti_rule intact, so esw_update_vport_mc_promisc() runs and adds MLX5_ACTION_ADD entries to vport->mc_list whose flow rules are then installed in the FDB by esw_add_mc_addr(). esw_destroy_legacy_table() tears down the FDB with those refs still held, corrupting the sub-tree and leaving dangling flow_rule pointers in vport->mc_list. Two-stage failure on `echo 1 > /sys/bus/pci/devices/<bdf>/reset`: refcount_t: underflow; use-after-free. tree_put_node+0xef/0x110 [mlx5_core] clean_tree+0x44/0xd0 [mlx5_core] (x5) mlx5_fs_core_cleanup+0x57/0x1c0 [mlx5_core] mlx5_unload+0x65/0xd0 [mlx5_core] ... mlx5_health_try_recover BUG: unable to handle page fault for address: 0000000003000055 down_write+0x1c/0x60 mlx5_del_flow_rules+0x33/0x1f0 [mlx5_core] esw_del_mc_addr+0x7b/0x170 [mlx5_core] esw_apply_vport_addr_list+0x56/0xf0 [mlx5_core] esw_vport_change_handle_locked+0x28b/0x310 [mlx5_core] mlx5_esw_vport_enable+0x270/0x4a0 [mlx5_core] ... mlx5_load ... mlx5_health_try_recover esw_apply_vport_rx_mode(false, false) clears vport->allmulti_rule via its local state machine even when the FW del fails. With the rule NULL the !IS_ERR_OR_NULL(allmulti_rule) gate in the change handler closes, no rules are installed during disable, and the reload starts with a clean mc_list. | ||||
| CVE-2026-98013 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_pie: clamp quantum in change path fq_pie_change() accepts any quantum value from userspace, including 1. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 makes the deficit-refill loop spin ~2^31 times under the qdisc lock (a soft lockup / denial of service). Add max(256U, ...) matching fq_codel_change(). Conditions to recreate the bug: CONFIG_NET_SCH_FQ_PIE=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root fq_pie tc qdisc change dev dummy0 root fq_pie quantum 1 stab data 32768 size_log 15 cell_log 0 | ||||
| CVE-2026-98012 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sfq: clamp quantum in change path sfq_change() accepts any non-negative quantum (only rejects (int)ctl->quantum < 0). With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 makes the deficit-refill loop spin ~2^31 times under the qdisc lock (a soft lockup / denial of service). Add max(256U, ...) matching fq_codel_change(). Reject quantum > 1<<20 with -EINVAL, matching fq_codel_change() and the init clamp. Conditions to recreate the bug: CONFIG_NET_SCH_SFQ=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root sfq tc qdisc change dev dummy0 root sfq quantum 1 stab data 32768 size_log 15 cell_log 0 | ||||
| CVE-2026-98011 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: clamp quantum in change and init paths hhf_change() accepts any quantum from userspace, including 1. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 makes the deficit-refill loop spin ~2^31 times under the qdisc lock (a soft lockup / denial of service). Add max(256U, ...) in hhf_change() matching fq_codel_change(). Clamp hhf_init() to [256, 1<<20] matching the siblings, and remove the old fallback that only set quantum=256 on overflow. Conditions to recreate the bug: CONFIG_NET_SCH_HHF=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root hhf tc qdisc change dev dummy0 root hhf quantum 1 stab data 32768 size_log 15 cell_log 0 | ||||
| CVE-2026-98010 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: drr: clamp quantum in change class drr_change_class() rejects explicit quantum==0 but falls back to psched_mtu() with no floor. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 (or a zero psched_mtu on a headerless device) makes the deficit-refill loop spin under the qdisc lock. Add clamp_t(u32, quantum, 256, 1<<20) after the zero reject and on the fallback path. The explicit-zero reject is preserved. Conditions to recreate the bug: CONFIG_NET_SCH_DRR=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root drr tc class add dev dummy0 parent 1: classid 1:1 drr quantum 1 | ||||
| CVE-2026-98009 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: clamp quantum in parse and fallback paths ets_qdisc_change() falls back to psched_mtu() with no floor for bands without an explicit quantum. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so a zero psched_mtu on a headerless device makes the deficit-refill loop spin under the qdisc lock. Move the floor into ets_quantum_parse() so explicitly configured quanta are also clamped to [256, 1<<20], not just the fallback path. Conditions to recreate the bug: CONFIG_NET_SCH_ETS=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root ets bands 3 strict 2 quanta 1 1 | ||||
| CVE-2026-98008 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: fix NULL pointer dereference on unbind with fixed-link When the device tree describes a fixed-link and has no "mdio" child node, macb_mii_init() returns early without allocating the MDIO bus, leaving bp->mii_bus as NULL. Two cleanup paths then dereference this NULL bus: 1. On driver unbind, macb_remove() unconditionally calls mdiobus_unregister(bp->mii_bus), which oopses: Unable to handle kernel NULL pointer dereference at virtual address 00000000000004a8 pc : mdiobus_unregister+0x14/0xa4 lr : macb_remove+0x38/0xa4 Call trace: mdiobus_unregister+0x14/0xa4 (P) macb_remove+0x38/0xa4 platform_remove+0x20/0x30 device_release_driver_internal+0x1c8/0x224 unbind_store+0xb4/0xbc 2. On the probe error path in macb_probe(), reached when macb_mii_init() has succeeded but a subsequent step fails, the err_out_unregister_mdio label runs the same unconditional cleanup. mdiobus_unregister() and mdiobus_free() do not guard against a NULL bus, so guard the calls in both macb_remove() and the probe error path. | ||||
| CVE-2026-98007 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject non-scalar bpf_loop iteration counts bpf_loop() declares its nr_loops argument as ARG_ANYTHING. Privileged programs may pass pointer values to such arguments, so check_func_arg() lets a pointer-valued R1 reach the helper-specific checks. Since commit bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations"), the verifier marks R1 precise and reads its upper bound to limit callback simulation. Precision backtracking only accepts scalar registers, so passing a pointer instead triggers the "backtracking misuse" verifier warning. Kernels with panic_on_warn enabled subsequently panic. Introduce ARG_SCALAR for helper arguments that only accept scalar values and use it for bpf_loop() nr_loops. Generic helper argument validation then rejects pointers before loop inlining and precision processing. | ||||
| CVE-2026-98006 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: Decoupling ep1_in_urb in caiaq dev The epq_in_urb object belonging to the caiaq device is coupled within the struct snd_usb_caiaqdev. After usb_submit_urb(epq_in_urb, GFP_KERNEL) executes successfully, epq_in_urb is successfully added to the urbp_list queue of the dummy HCD driver (userspace specifies dummy_hcd as the HCD layer driver for the caiaq USB device). When init_card() calls snd_usb_caiaq_send_command() which subsequently fails due to a timeout, and proceeds to call snd_card_free() to release the card, the embedded ep1_in_urb object is also freed. When the dummy HCD driver detects that the URB has been unlinked, it returns the URB (by usb_hcd_giveback_urb()), which triggers [1]. Decouple the ep1_in_urb object from the struct snd_usb_caiaqdev and switch to using a pointer instead. Separately allocate and manage the memory for ep1_in_urb to prevent the release of the snd_card memory object from interfering with it. midi_out_urb has the same issue as ep1_in_urb and is handled in the same way. [1] BUG: KASAN: slab-use-after-free in usb_free_urb+0x24/0x120 drivers/usb/core/urb.c:96 Write of size 4 at addr ffff88803cee1050 by task ktimers/1/29 Call Trace: usb_free_urb+0x24/0x120 drivers/usb/core/urb.c:96 dummy_timer+0xaac/0x4d50 drivers/usb/gadget/udc/dummy_hcd.c:2019 __run_hrtimer kernel/time/hrtimer.c:2067 [inline] __hrtimer_run_queues+0x3eb/0xaf0 kernel/time/hrtimer.c:2124 hrtimer_run_softirq+0x1e1/0x2e0 kernel/time/hrtimer.c:2141 Allocated by task 36: snd_card_new+0x7b/0x110 sound/core/init.c:184 create_card sound/usb/caiaq/device.c:429 [inline] snd_probe+0x236/0x1af0 sound/usb/caiaq/device.c:544 Freed by task 36: snd_card_free_when_closed sound/core/init.c:630 [inline] snd_card_free+0x138/0x1d0 sound/core/init.c:662 snd_probe+0x162b/0x1af0 sound/usb/caiaq/device.c:553 | ||||
| CVE-2026-98005 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: delimit inode_share cache key components Previously, inode_share keys were encoded as follows: fingerprint || domain_id It would be better to have a separator between the fingerprint and domain ID so that the fingerprint won't be parsed as part of a domain ID. Change the key encoding as follows: domain_id || '\0' || fingerprint Since domain_id is a NUL-terminated string, this makes the in-memory key indices unambiguous. | ||||
| CVE-2026-98004 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: Serialize command queue publishing Serialize command queue publishing so software producer state advances only after a command is written and the hardware tail is updated. Wait for hardware consumption outside the queue lock when the command queue is full so other CPUs are not blocked behind a long poll. | ||||
| CVE-2026-98003 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Do not reallocate GA log buffers on resume Commit c5e1a1eb9279 ("iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement") moved the GA log allocation from iommu_init_pci() to enable_iommus_vapic(), which is called on every resume. iommu_init_ga_log() assigns iommu->ga_log and iommu->ga_log_tail unconditionally. Each resume therefore replaces the boot-time pointers and leaks both old allocations. The function also uses GFP_KERNEL from a syscore resume callback, where interrupts are disabled and the non-boot CPUs are offline. Return early if both buffers are already allocated. Clear the pointers in free_ga_log() so a partial allocation failure cannot leave ga_log dangling. | ||||
| CVE-2026-98002 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix ineffective error check in nested domain allocation amd_iommu_pdom_id_alloc() returns an int: a domain ID on success, or the negative errno from ida_alloc_range() when the ID space is exhausted or memory is short. amd_iommu_alloc_domain_nested() stores that return value in gdom_info->hdom_id, which is a u32, and only then tests it: gdom_info->hdom_id = amd_iommu_pdom_id_alloc(); if (gdom_info->hdom_id <= 0) { The assignment discards the sign, so -ENOSPC becomes 0xffffffe4 and the test never fires. The nested domain is then set up with a host domain ID that was never allocated, instead of the allocation failing with -ENOSPC. Keep the value in an int, test it there, and store it only once it is known to be valid, which is what the other amd_iommu_pdom_id_alloc() callers already do. | ||||