| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix user_ref race between scrub and refill paths
The io_zcrx_put_niov_uref() function uses a non-atomic
check-then-decrement pattern (atomic_read followed by separate
atomic_dec) to manipulate user_refs. This is serialized against other
callers by rq_lock, but io_zcrx_scrub() modifies the same counter with
atomic_xchg() WITHOUT holding rq_lock.
On SMP systems, the following race exists:
CPU0 (refill, holds rq_lock) CPU1 (scrub, no rq_lock)
put_niov_uref:
atomic_read(uref) - 1
// window opens
atomic_xchg(uref, 0) - 1
return_niov_freelist(niov) [PUSH #1]
// window closes
atomic_dec(uref) - wraps to -1
returns true
return_niov(niov)
return_niov_freelist(niov) [PUSH #2: DOUBLE-FREE]
The same niov is pushed to the freelist twice, causing free_count to
exceed nr_iovs. Subsequent freelist pushes then perform an out-of-bounds
write (a u32 value) past the kvmalloc'd freelist array into the adjacent
slab object.
Fix this by replacing the non-atomic read-then-dec in
io_zcrx_put_niov_uref() with an atomic_try_cmpxchg loop that atomically
tests and decrements user_refs. This makes the operation safe against
concurrent atomic_xchg from scrub without requiring scrub to acquire
rq_lock.
[pavel: removed a warning and a comment] |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Update cpuidle driver check in __acpi_processor_start()
Commit 7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI idle
driver registration") moved the ACPI idle driver registration to
acpi_processor_driver_init() and acpi_processor_power_init() does
not register an idle driver any more.
Accordingly, the cpuidle driver check in __acpi_processor_start() needs
to be updated to avoid calling acpi_processor_power_init() without a
cpuidle driver, in which case the registration of the cpuidle device
in that function would lead to a NULL pointer dereference in
__cpuidle_register_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mixer: oss: Add card disconnect checkpoints
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix circular locking dependency in run_unpack_ex
Syzbot reported a circular locking dependency between wnd->rw_lock
(sbi->used.bitmap) and ni->file.run_lock.
The deadlock scenario:
1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock.
2. run_unpack_ex() takes wnd->rw_lock then tries to acquire
ni->file.run_lock inside ntfs_refresh_zone().
This creates an AB-BA deadlock.
Fix this by using down_read_trylock() instead of down_read() when
acquiring run_lock in run_unpack_ex(). If the lock is contended,
skip ntfs_refresh_zone() - the MFT zone will be refreshed on the
next MFT operation. This breaks the circular dependency since we
never block waiting for run_lock while holding wnd->rw_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: ->d_compare() must not block
... so don't use __getname() there. Switch it (and ntfs_d_hash(), while
we are at it) to kmalloc(PATH_MAX, GFP_NOWAIT). Yes, ntfs_d_hash()
almost certainly can do with smaller allocations, but let ntfs folks
deal with that - keep the allocation size as-is for now.
Stop abusing names_cachep in ntfs, period - various uses of that thing
in there have nothing to do with pathnames; just use k[mz]alloc() and
be done with that. For now let's keep sizes as-in, but AFAICS none of
the users actually want PATH_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c/tw9906: Fix potential memory leak in tw9906_probe()
In one of the error paths in tw9906_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: move vdpa group bound check to vhost_vdpa
Remove duplication by consolidating these here. This reduces the
posibility of a parent driver missing them.
While we're at it, fix a bug in vdpa_sim where a valid ASID can be
assigned to a group equal to ngroups, causing an out of bound write. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.
The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.
Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists
This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: move wait_on_sem() out of spinlock
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
media: qcom: camss: vfe: Fix out-of-bounds access in vfe_isr_reg_update()
vfe_isr() iterates using MSM_VFE_IMAGE_MASTERS_NUM(7) as the loop
bound and passes the index to vfe_isr_reg_update(). However,
vfe->line[] array is defined with VFE_LINE_NUM_MAX(4):
struct vfe_line line[VFE_LINE_NUM_MAX];
When index is 4, 5, 6, the access to vfe->line[line_id] exceeds
the array bounds and resulting in out-of-bounds memory access.
Fix this by using separate loops for output lines and write masters. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx88: Add missing unmap in snd_cx88_hw_params()
In error path, add cx88_alsa_dma_unmap() to release
resource acquired by cx88_alsa_dma_map(). |
| In the Linux kernel, the following vulnerability has been resolved:
misc: ti_fpc202: fix a potential memory leak in probe function
Use for_each_child_of_node_scoped() to simplify the code and ensure the
device node reference is automatically released when the loop scope
ends. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/buffer: add alert in try_to_free_buffers() for folios without buffers
try_to_free_buffers() can be called on folios with no buffers attached
when filemap_release_folio() is invoked on a folio belonging to a mapping
with AS_RELEASE_ALWAYS set but no release_folio operation defined.
In such cases, folio_needs_release() returns true because of the
AS_RELEASE_ALWAYS flag, but the folio has no private buffer data. This
causes try_to_free_buffers() to call drop_buffers() on a folio with no
buffers, leading to a null pointer dereference.
Adding a check in try_to_free_buffers() to return early if the folio has no
buffers attached, with WARN_ON_ONCE() to alert about the misconfiguration.
This provides defensive hardening. |
| A flaw was found in the X.Org X server. This vulnerability, an out-of-bounds read, affects the XKB (X Keyboard Extension) modifier map handling. An attacker with access to the X11 server can exploit this by sending a malformed request, which causes the server to read beyond its intended memory boundaries. This can lead to the exposure of sensitive information or cause the server to crash, resulting in a denial of service. |
| PhpSpreadsheet is a library for reading and writing spreadsheet files. In versions 1.30.3 and earlier, 2.0.0 through 2.1.15, 2.2.0 through 2.4.4, 3.3.0 through 3.10.4, and 4.0.0 through 5.6.0, the HTML Writer skips htmlspecialchars() output escaping when a cell uses a custom number format containing the @ text placeholder with additional literal text (e.g., @ "items"). The escaping is only applied when the formatted output strictly equals the original cell value. When the format code contains @ with quoted literal text, the formatter substitutes the raw cell value into the format string and returns early without invoking the escaping callback. An attacker who can control cell content in a spreadsheet processed by the HTML Writer can inject arbitrary HTML and JavaScript into the generated output. This issue has been fixed in versions 1.30.4, 2.1.16, 2.4.5, 3.10.5, and 5.7.0. |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, the SbieIniServer RunSbieCtrl handler contains a stack buffer overflow. The MSGID_SBIE_INI_RUN_SBIE_CTRL message is handled before normal sandbox and impersonation checks, and for non-sandboxed callers, the handler copies the trailing message payload into a fixed-size WCHAR ctrlCmd[128] stack buffer using memcpy without verifying the length fits within the buffer. The service pipe is created with a NULL DACL, allowing any local interactive process to connect and send an oversized payload to overflow the stack. This can lead to a crash of the SbieSvc service or potential code execution as SYSTEM. This issue has been fixed in version 1.17.3. |
| The Fluent Forms plugin for WordPress is vulnerable to Arbitrary File Read in versions up to and including 6.2.1. This is due to insufficient path validation in the getAttachments() method of EmailNotificationActions, which resolves attacker-supplied file-upload URLs into filesystem paths without verifying that the resolved path stays inside the WordPress uploads directory: a strpos() prefix check on the raw URL can be bypassed with traversal sequences, wp_normalize_path() does not resolve ".\..\" segments, and file_exists() then resolves them at the kernel level. This makes it possible for authenticated attackers with administrator access to read arbitrary files readable by the web-server user — including wp-config.php with its database credentials and authentication salts — by submitting a form whose admin notification is configured to attach a file-upload field and supplying a crafted URL of the shape <upload_baseurl>/../../<target> as the file-field value. The resolved file is attached to the outbound admin-notification email via wp_mail(). While the email can be triggered by unauthenticated users, the email recipient is not user-controlled. |
| Vaultwarden is a Bitwarden-compatible server written in Rust. In version 1.35.4 and earlier, the get_org_collections_details endpoint (GET /api/organizations/{org_id}/collections/details) is missing the has_full_access() authorization check that exists on the sibling get_org_collections endpoint. This allows any Manager-role user with accessAll=False and no collection assignments to retrieve the names, UUIDs, user-to-collection mappings, and group-to-collection mappings for all collections in the organization. This issue has been fixed in version 1.35.5. |
| MobaXterm versions prior to 26.1 contain an uncontrolled search path element vulnerability. The application calls WinExec to execute Notepad++ without a fully qualified executable path when opening remote files. An attacker can exploit the search path behavior by placing a malicious executable earlier in the search order, resulting in arbitrary code execution in the context of the affected user. |
| Sandboxie is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, a local denial of service vulnerability exists in the Sandboxie kernel driver. An unprivileged process running inside a Standard Sandbox can send a malformed IOCTL to the \Device\SandboxieDriverApi driver, triggering an immediate kernel crash (BSOD). The vulnerability affects the Standard Sandbox configuration both with and without dropped administrator privileges, but does not affect the Security Hardened Sandbox configuration. This issue has been fixed in version 1.17.3. Users who cannot update can use the Security Hardened Sandbox configuration as a workaround. |
