| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
serial: caif: hold tty->link reference in ldisc_open and ser_release
A reproducer triggers a KASAN slab-use-after-free in pty_write_room()
when caif_serial's TX path calls tty_write_room(). The faulting access
is on tty->link->port.
Hold an extra kref on tty->link for the lifetime of the caif_serial line
discipline: get it in ldisc_open() and drop it in ser_release(), and
also drop it on the ldisc_open() error path.
With this change applied, the reproducer no longer triggers the UAF in
my testing. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: soc-core: flush delayed work before removing DAIs and widgets
When a sound card is unbound while a PCM stream is open, a
use-after-free can occur in snd_soc_dapm_stream_event(), called from
the close_delayed_work workqueue handler.
During unbind, snd_soc_unbind_card() flushes delayed work and then
calls soc_cleanup_card_resources(). Inside cleanup,
snd_card_disconnect_sync() releases all PCM file descriptors, and
the resulting PCM close path can call snd_soc_dapm_stream_stop()
which schedules new delayed work with a pmdown_time timer delay.
Since this happens after the flush in snd_soc_unbind_card(), the
new work is not caught. soc_remove_link_components() then frees
DAPM widgets before this work fires, leading to the use-after-free.
The existing flush in soc_free_pcm_runtime() also cannot help as it
runs after soc_remove_link_components() has already freed the widgets.
Add a flush in soc_cleanup_card_resources() after
snd_card_disconnect_sync() (after which no new PCM closes can
schedule further delayed work) and before soc_remove_link_dais()
and soc_remove_link_components() (which tear down the structures the
delayed work accesses). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc, afs: Fix missing error pointer check after rxrpc_kernel_lookup_peer()
rxrpc_kernel_lookup_peer() can also return error pointers in addition to
NULL, so just checking for NULL is not sufficient.
Fix this by:
(1) Changing rxrpc_kernel_lookup_peer() to return -ENOMEM rather than NULL
on allocation failure.
(2) Making the callers in afs use IS_ERR() and PTR_ERR() to pass on the
error code returned. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ
XDP multi-buf programs can modify the layout of the XDP buffer when the
program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The
referenced commit in the fixes tag corrected the assumption in the mlx5
driver that the XDP buffer layout doesn't change during a program
execution. However, this fix introduced another issue: the dropped
fragments still need to be counted on the driver side to avoid page
fragment reference counting issues.
The issue was discovered by the drivers/net/xdp.py selftest,
more specifically the test_xdp_native_tx_mb:
- The mlx5 driver allocates a page_pool page and initializes it with
a frag counter of 64 (pp_ref_count=64) and the internal frag counter
to 0.
- The test sends one packet with no payload.
- On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP
buffer with the packet data starting in the first fragment which is the
page mentioned above.
- The XDP program runs and calls bpf_xdp_pull_data() which moves the
header into the linear part of the XDP buffer. As the packet doesn't
contain more data, the program drops the tail fragment since it no
longer contains any payload (pp_ref_count=63).
- mlx5 device skips counting this fragment. Internal frag counter
remains 0.
- mlx5 releases all 64 fragments of the page but page pp_ref_count is
63 => negative reference counting error.
Resulting splat during the test:
WARNING: CPU: 0 PID: 188225 at ./include/net/page_pool/helpers.h:297 mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core]
Modules linked in: [...]
CPU: 0 UID: 0 PID: 188225 Comm: ip Not tainted 6.18.0-rc7_for_upstream_min_debug_2025_12_08_11_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core]
[...]
Call Trace:
<TASK>
mlx5e_free_rx_mpwqe+0x20a/0x250 [mlx5_core]
mlx5e_dealloc_rx_mpwqe+0x37/0xb0 [mlx5_core]
mlx5e_free_rx_descs+0x11a/0x170 [mlx5_core]
mlx5e_close_rq+0x78/0xa0 [mlx5_core]
mlx5e_close_queues+0x46/0x2a0 [mlx5_core]
mlx5e_close_channel+0x24/0x90 [mlx5_core]
mlx5e_close_channels+0x5d/0xf0 [mlx5_core]
mlx5e_safe_switch_params+0x2ec/0x380 [mlx5_core]
mlx5e_change_mtu+0x11d/0x490 [mlx5_core]
mlx5e_change_nic_mtu+0x19/0x30 [mlx5_core]
netif_set_mtu_ext+0xfc/0x240
do_setlink.isra.0+0x226/0x1100
rtnl_newlink+0x7a9/0xba0
rtnetlink_rcv_msg+0x220/0x3c0
netlink_rcv_skb+0x4b/0xf0
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
____sys_sendmsg+0x1e8/0x240
___sys_sendmsg+0x7c/0xb0
[...]
__sys_sendmsg+0x5f/0xb0
do_syscall_64+0x55/0xc70
The problem applies for XDP_PASS as well which is handled in a different
code path in the driver.
This patch fixes the issue by doing page frag counting on all the
original XDP buffer fragments for all relevant XDP actions (XDP_TX ,
XDP_REDIRECT and XDP_PASS). This is basically reverting to the original
counting before the commit in the fixes tag.
As frag_page is still pointing to the original tail, the nr_frags
parameter to xdp_update_skb_frags_info() needs to be calculated
in a different way to reflect the new nr_frags. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix crash when moving to switchdev mode
When moving to switchdev mode when the device doesn't support IPsec,
we try to clean up the IPsec resources anyway which causes the crash
below, fix that by correctly checking for IPsec support before trying
to clean up its resources.
[27642.515799] WARNING: arch/x86/mm/fault.c:1276 at
do_user_addr_fault+0x18a/0x680, CPU#4: devlink/6490
[27642.517159] Modules linked in: xt_conntrack xt_MASQUERADE
ip6table_nat ip6table_filter ip6_tables iptable_nat nf_nat xt_addrtype
rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_fwctl nfnetlink
zram zsmalloc mlx5_ib fuse rpcrdma rdma_ucm ib_uverbs ib_iser libiscsi
scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_core
ib_core
[27642.521358] CPU: 4 UID: 0 PID: 6490 Comm: devlink Not tainted
6.19.0-rc5_for_upstream_min_debug_2026_01_14_16_47 #1 NONE
[27642.522923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[27642.524528] RIP: 0010:do_user_addr_fault+0x18a/0x680
[27642.525362] Code: ff 0f 84 75 03 00 00 48 89 ee 4c 89 e7 e8 5e b9 22
00 49 89 c0 48 85 c0 0f 84 a8 02 00 00 f7 c3 60 80 00 00 74 22 31 c9 eb
ae <0f> 0b 48 83 c4 10 48 89 ea 48 89 de 4c 89 f7 5b 5d 41 5c 41 5d
41
[27642.528166] RSP: 0018:ffff88810770f6b8 EFLAGS: 00010046
[27642.529038] RAX: 0000000000000000 RBX: 0000000000000002 RCX:
ffff88810b980f00
[27642.530158] RDX: 00000000000000a0 RSI: 0000000000000002 RDI:
ffff88810770f728
[27642.531270] RBP: 00000000000000a0 R08: 0000000000000000 R09:
0000000000000000
[27642.532383] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff888103f3c4c0
[27642.533499] R13: 0000000000000000 R14: ffff88810770f728 R15:
0000000000000000
[27642.534614] FS: 00007f197c741740(0000) GS:ffff88856a94c000(0000)
knlGS:0000000000000000
[27642.535915] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[27642.536858] CR2: 00000000000000a0 CR3: 000000011334c003 CR4:
0000000000172eb0
[27642.537982] Call Trace:
[27642.538466] <TASK>
[27642.538907] exc_page_fault+0x76/0x140
[27642.539583] asm_exc_page_fault+0x22/0x30
[27642.540282] RIP: 0010:_raw_spin_lock_irqsave+0x10/0x30
[27642.541134] Code: 07 85 c0 75 11 ba ff 00 00 00 f0 0f b1 17 75 06 b8
01 00 00 00 c3 31 c0 c3 90 0f 1f 44 00 00 53 9c 5b fa 31 c0 ba 01 00 00
00 <f0> 0f b1 17 75 05 48 89 d8 5b c3 89 c6 e8 7e 02 00 00 48 89 d8
5b
[27642.543936] RSP: 0018:ffff88810770f7d8 EFLAGS: 00010046
[27642.544803] RAX: 0000000000000000 RBX: 0000000000000202 RCX:
ffff888113ad96d8
[27642.545916] RDX: 0000000000000001 RSI: ffff88810770f818 RDI:
00000000000000a0
[27642.547027] RBP: 0000000000000098 R08: 0000000000000400 R09:
ffff88810b980f00
[27642.548140] R10: 0000000000000001 R11: ffff888101845a80 R12:
00000000000000a8
[27642.549263] R13: ffffffffa02a9060 R14: 00000000000000a0 R15:
ffff8881130d8a40
[27642.550379] complete_all+0x20/0x90
[27642.551010] mlx5e_ipsec_disable_events+0xb6/0xf0 [mlx5_core]
[27642.552022] mlx5e_nic_disable+0x12d/0x220 [mlx5_core]
[27642.552929] mlx5e_detach_netdev+0x66/0xf0 [mlx5_core]
[27642.553822] mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core]
[27642.554821] mlx5e_vport_rep_load+0x419/0x590 [mlx5_core]
[27642.555757] ? xa_load+0x53/0x90
[27642.556361] __esw_offloads_load_rep+0x54/0x70 [mlx5_core]
[27642.557328] mlx5_esw_offloads_rep_load+0x45/0xd0 [mlx5_core]
[27642.558320] esw_offloads_enable+0xb4b/0xc90 [mlx5_core]
[27642.559247] mlx5_eswitch_enable_locked+0x34e/0x4f0 [mlx5_core]
[27642.560257] ? mlx5_rescan_drivers_locked+0x222/0x2d0 [mlx5_core]
[27642.561284] mlx5_devlink_eswitch_mode_set+0x5ac/0x9c0 [mlx5_core]
[27642.562334] ? devlink_rate_set_ops_supported+0x21/0x3a0
[27642.563220] devlink_nl_eswitch_set_doit+0x67/0xe0
[27642.564026] genl_family_rcv_msg_doit+0xe0/0x130
[27642.564816] genl_rcv_msg+0x183/0x290
[27642.565466] ? __devlink_nl_pre_doit.isra.0+0x160/0x160
[27642.566329] ? d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Decrement re_receiving on the early exit paths
In the event that rpcrdma_post_recvs() fails to create a work request
(due to memory allocation failure, say) or otherwise exits early, we
should decrement ep->re_receiving before returning. Otherwise we will
hang in rpcrdma_xprt_drain() as re_receiving will never reach zero and
the completion will never be triggered.
On a system with high memory pressure, this can appear as the following
hung task:
INFO: task kworker/u385:17:8393 blocked for more than 122 seconds.
Tainted: G S E 6.19.0 #3
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u385:17 state:D stack:0 pid:8393 tgid:8393 ppid:2 task_flags:0x4248060 flags:0x00080000
Workqueue: xprtiod xprt_autoclose [sunrpc]
Call Trace:
<TASK>
__schedule+0x48b/0x18b0
? ib_post_send_mad+0x247/0xae0 [ib_core]
schedule+0x27/0xf0
schedule_timeout+0x104/0x110
__wait_for_common+0x98/0x180
? __pfx_schedule_timeout+0x10/0x10
wait_for_completion+0x24/0x40
rpcrdma_xprt_disconnect+0x444/0x460 [rpcrdma]
xprt_rdma_close+0x12/0x40 [rpcrdma]
xprt_autoclose+0x5f/0x120 [sunrpc]
process_one_work+0x191/0x3e0
worker_thread+0x2e3/0x420
? __pfx_worker_thread+0x10/0x10
kthread+0x10d/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x273/0x2b0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net()
When idtab allocation fails, net is not registered with rio_add_net() yet,
so kfree(net) is sufficient to release the memory. Set mport->net to NULL
to avoid dangling pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: clear page->private in free_pages_prepare()
Several subsystems (slub, shmem, ttm, etc.) use page->private but don't
clear it before freeing pages. When these pages are later allocated as
high-order pages and split via split_page(), tail pages retain stale
page->private values.
This causes a use-after-free in the swap subsystem. The swap code uses
page->private to track swap count continuations, assuming freshly
allocated pages have page->private == 0. When stale values are present,
swap_count_continued() incorrectly assumes the continuation list is valid
and iterates over uninitialized page->lru containing LIST_POISON values,
causing a crash:
KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107]
RIP: 0010:__do_sys_swapoff+0x1151/0x1860
Fix this by clearing page->private in free_pages_prepare(), ensuring all
freed pages have clean state regardless of previous use. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: fix NULL pointer dereference in ublk_ctrl_set_size()
ublk_ctrl_set_size() unconditionally dereferences ub->ub_disk via
set_capacity_and_notify() without checking if it is NULL.
ub->ub_disk is NULL before UBLK_CMD_START_DEV completes (it is only
assigned in ublk_ctrl_start_dev()) and after UBLK_CMD_STOP_DEV runs
(ublk_detach_disk() sets it to NULL). Since the UBLK_CMD_UPDATE_SIZE
handler performs no state validation, a user can trigger a NULL pointer
dereference by sending UPDATE_SIZE to a device that has been added but
not yet started, or one that has been stopped.
Fix this by checking ub->ub_disk under ub->mutex before dereferencing
it, and returning -ENODEV if the disk is not available. |
| 18next-http-middleware is a middleware to be used with Node.js web frameworks like express or Fastify and also for Deno. Versions prior to 3.9.3 allow an unauthenticated HTTP client to pollute Object.prototype in the Node.js process hosting the middleware, via two unvalidated entry points that reach internal object-key writes: getResourcesHandler and missingKeyHandler. This can break authorisation checks (if (user.isAdmin) returning true for any user), cause type-confusion DoS, and depending on downstream code it can be chained into RCE. |
| In th30d4y/IP from version 1.0.1 to before version 2.0.1, a DOM-Based Cross-Site Scripting (XSS) vulnerability was identified in an IP Reputation Checker application. Unsanitized user input was directly rendered in the browser, allowing attackers to execute arbitrary JavaScript. This issue has been patched in version 2.0.1. |
| Other issue in the WebRTC component. This vulnerability was fixed in Firefox ESR 140.10.2 and Thunderbird 140.10.2. |
| An issue in fohrloop dash-uploader v.0.1.0 through v.0.7.0a2 allows a remote attacker to execute arbitrary code via the dash_uploader/httprequesthandler.py, dash_uploader/upload.py in the Upload function and max_file_size parameter, dash_uploader/configure_upload.py components |
| Inefficient Algorithmic Complexity vulnerability in absinthe-graphql absinthe allows unauthenticated denial of service via quadratic fragment-name uniqueness validation.
'Elixir.Absinthe.Phase.Document.Validation.UniqueFragmentNames':run/2 iterates over all fragments and for each one calls duplicate?/2, which evaluates Enum.count(fragments, &(&1.name == name)) — a full linear scan of the fragment list. The result is O(N²) comparisons per document, where N is the number of fragment definitions supplied by the caller.
Because input.fragments is built directly from the GraphQL query body, N is fully attacker-controlled. A minimum-size fragment definition is roughly 16 bytes, so a ~1 MB document carries ~60,000 fragments and forces ~3.6 × 10⁹ comparisons inside this single validation phase. No authentication, schema knowledge, or special configuration is required.
This issue affects absinthe: from 1.2.0 before 1.10.2. |
| Allocation of Resources Without Limits or Throttling vulnerability in absinthe-graphql absinthe allows unauthenticated denial of service via atom table exhaustion when parsing attacker-controlled GraphQL SDL.
Multiple Blueprint.Draft.convert/2 implementations in Absinthe's SDL language modules call String.to_atom/1 on attacker-controlled names from parsed GraphQL SDL documents, including directive names, field names, type names, and argument names. Because atoms are never garbage-collected and the BEAM atom table has a fixed limit (default 1,048,576), each unique name permanently consumes one slot. An attacker can exhaust the atom table by submitting SDL documents containing enough unique names, causing the Erlang VM to abort with system_limit and taking down the entire node.
Any application that passes attacker-controlled GraphQL SDL through Absinthe's parser is exposed — for example, a schema-upload endpoint, a federation gateway that ingests remote SDL, or any developer tool that runs the parser over user-supplied documents.
This issue affects absinthe: from 1.5.0 before 1.10.2. |
| openvpn-auth-oauth2 is a plugin/management interface client for OpenVPN server to handle an OIDC based single sign-on (SSO) auth flows. From version 1.26.3 to before version 1.27.3, when openvpn-auth-oauth2 is deployed in the experimental plugin mode (shared library loaded by OpenVPN via the plugin directive), clients that do not support WebAuth/SSO (e.g., the openvpn CLI on Linux) are incorrectly admitted to the VPN despite being denied by the authentication logic. The default management-interface mode is not affected because it does not use the OpenVPN plugin return-code mechanism. This issue has been patched in version 1.27.3. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: hx9023s: Protect against division by zero in set_samp_freq
Avoid division by zero when sampling frequency is unspecified. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort when snapshotting received subvolumes
Currently a user can trigger a transaction abort by snapshotting a
previously received snapshot a bunch of times until we reach a
BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we
can store in a leaf). This is very likely not common in practice, but
if it happens, it turns the filesystem into RO mode. The snapshot, send
and set_received_subvol and subvol_setflags (used by receive) don't
require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user
could use this to turn a filesystem into RO mode and disrupt a system.
Reproducer script:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
# Use smallest node size to make the test faster.
mkfs.btrfs -f --nodesize 4K $DEV
mount $DEV $MNT
# Create a subvolume and set it to RO so that it can be used for send.
btrfs subvolume create $MNT/sv
touch $MNT/sv/foo
btrfs property set $MNT/sv ro true
# Send and receive the subvolume into snaps/sv.
mkdir $MNT/snaps
btrfs send $MNT/sv | btrfs receive $MNT/snaps
# Now snapshot the received subvolume, which has a received_uuid, a
# lot of times to trigger the leaf overflow.
total=500
for ((i = 1; i <= $total; i++)); do
echo -ne "\rCreating snapshot $i/$total"
btrfs subvolume snapshot -r $MNT/snaps/sv $MNT/snaps/sv_$i > /dev/null
done
echo
umount $MNT
When running the test:
$ ./test.sh
(...)
Create subvolume '/mnt/sdi/sv'
At subvol /mnt/sdi/sv
At subvol sv
Creating snapshot 496/500ERROR: Could not create subvolume: Value too large for defined data type
Creating snapshot 497/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 498/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 499/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 500/500ERROR: Could not create subvolume: Read-only file system
And in dmesg/syslog:
$ dmesg
(...)
[251067.627338] BTRFS warning (device sdi): insert uuid item failed -75 (0x4628b21c4ac8d898, 0x2598bee2b1515c91) type 252!
[251067.629212] ------------[ cut here ]------------
[251067.630033] BTRFS: Transaction aborted (error -75)
[251067.630871] WARNING: fs/btrfs/transaction.c:1907 at create_pending_snapshot.cold+0x52/0x465 [btrfs], CPU#10: btrfs/615235
[251067.632851] Modules linked in: btrfs dm_zero (...)
[251067.644071] CPU: 10 UID: 0 PID: 615235 Comm: btrfs Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full)
[251067.646165] Tainted: [W]=WARN
[251067.646733] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[251067.648735] RIP: 0010:create_pending_snapshot.cold+0x55/0x465 [btrfs]
[251067.649984] Code: f0 48 0f (...)
[251067.653313] RSP: 0018:ffffce644908fae8 EFLAGS: 00010292
[251067.653987] RAX: 00000000ffffff01 RBX: ffff8e5639e63a80 RCX: 00000000ffffffd3
[251067.655042] RDX: ffff8e53faa76b00 RSI: 00000000ffffffb5 RDI: ffffffffc0919750
[251067.656077] RBP: ffffce644908fbd8 R08: 0000000000000000 R09: ffffce644908f820
[251067.657068] R10: ffff8e5adc1fffa8 R11: 0000000000000003 R12: ffff8e53c0431bd0
[251067.658050] R13: ffff8e5414593600 R14: ffff8e55efafd000 R15: 00000000ffffffb5
[251067.659019] FS: 00007f2a4944b3c0(0000) GS:ffff8e5b27dae000(0000) knlGS:0000000000000000
[251067.660115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[251067.660943] CR2: 00007ffc5aa57898 CR3: 00000005813a2003 CR4: 0000000000370ef0
[251067.661972] Call Trace:
[251067.662292] <TASK>
[251067.662653] create_pending_snapshots+0x97/0xc0 [btrfs]
[251067.663413] btrfs_commit_transaction+0x26e/0xc00 [btrfs]
[251067.664257] ? btrfs_qgroup_convert_reserved_meta+0x35/0x390 [btrfs]
[251067.665238] ? _raw_spin_unlock+0x15/0x30
[251067.665837] ? record_root_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
x86/apic: Disable x2apic on resume if the kernel expects so
When resuming from s2ram, firmware may re-enable x2apic mode, which may have
been disabled by the kernel during boot either because it doesn't support IRQ
remapping or for other reasons. This causes the kernel to continue using the
xapic interface, while the hardware is in x2apic mode, which causes hangs.
This happens on defconfig + bare metal + s2ram.
Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be
disabled, i.e. when x2apic_mode = 0.
The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the
pre-sleep configuration or initial boot configuration for each CPU, including
MSR state:
When executing from the power-on reset vector as a result of waking from an
S2 or S3 sleep state, the platform firmware performs only the hardware
initialization required to restore the system to either the state the
platform was in prior to the initial operating system boot, or to the
pre-sleep configuration state. In multiprocessor systems, non-boot
processors should be placed in the same state as prior to the initial
operating system boot.
(further ahead)
If this is an S2 or S3 wake, then the platform runtime firmware restores
minimum context of the system before jumping to the waking vector. This
includes:
CPU configuration. Platform runtime firmware restores the pre-sleep
configuration or initial boot configuration of each CPU (MSR, MTRR,
firmware update, SMBase, and so on). Interrupts must be disabled (for
IA-32 processors, disabled by CLI instruction).
(and other things)
So at least as per the spec, re-enablement of x2apic by the firmware is
allowed if "x2apic on" is a part of the initial boot configuration.
[1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization
[ bp: Massage. ] |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix undersized l_iclog_roundoff values
If the superblock doesn't list a log stripe unit, we set the incore log
roundoff value to 512. This leads to corrupt logs and unmountable
filesystems in generic/617 on a disk with 4k physical sectors...
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197.
XFS (sda1): failed to locate log tail
XFS (sda1): log mount/recovery failed: error -74
XFS (sda1): log mount failed
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Ending clean mount
...on the current xfsprogs for-next which has a broken mkfs. xfs_info
shows this...
meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
= exchange=1 metadir=1
data = bsize=4096 blocks=2579968, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1
log =internal log bsize=4096 blocks=16384, version=2
= sectsz=4096 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
= rgcount=0 rgsize=268435456 extents
= zoned=0 start=0 reserved=0
...observe that the log section has sectsz=4096 sunit=0, which means
that the roundoff factor is 512, not 4096 as you'd expect. We should
fix mkfs not to generate broken filesystems, but anyone can fuzz the
ondisk superblock so we should be more cautious. I think the inadequate
logic predates commit a6a65fef5ef8d0, but that's clearly going to
require a different backport. |
