| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Tilt defines dev environments as code for microservice apps on Kubernetes. From 0.20.8 through 0.37.3, the Tilt HUD HTTP server registers handlers on a gorilla/mux router with no authenticating middleware. When the HUD is bound to a non-loopback address, an unauthenticated network caller can trigger developer-defined resources, tamper with Tiltfile arguments, read full engine state including the session token, and invoke apiserver resources through the token-attaching /proxy handler. This issue is fixed in version 0.37.4. |
| An issue in SQLite before Fossil check-in 869a51ae84df allows a local attacker to obtain sensitive information via the Session Extension changeset concat/changegroup merge path |
| A NULL pointer dereference in the SQLite Session Extension in SQLite 3.53.1 and SQLite trunk builds before check-in e807d4e3798efd53 allows an attacker who can supply a malformed changeset blob to cause a denial of service. The issue occurs when sqlite3changeset_apply_v3() applies a corrupt changeset and reaches sqlite3_value_type() with a NULL sqlite3_value pointer. |
| An OS command injection vulnerability exists in the start_bonjour() function of the "rc" binary in Cisco RV130/RV130W with firmware 1.0.3.55 and RV110W routers with firmware 1.2.2.5 / 1.2.2.8. The wan_hostname configuration parameter is not properly sanitized, which could allow an authenticated remote attacker to execute arbitrary OS commands with root privileges. |
| An OS command injection vulnerability exists in the save_syslog_to_file() function of the "httpd" binary in Cisco RV130/RV130W with firmware 1.0.3.55 and RV110W routers with firmware 1.2.2.5 / 1.2.2.8. The model_name configuration parameter is not properly sanitized, which could allow an authenticated remote attacker to execute arbitrary OS commands with root privileges. |
| An OS command injection vulnerability exists in the start_lltd() function of the "rc" binary in Cisco RV130/RV130W with firmware 1.0.3.55 and RV110W routers with firmware 1.2.2.5 / 1.2.2.8. The machine_name configuration parameter is not properly sanitized, which could allow an authenticated remote attacker to execute arbitrary OS commands with root privileges. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.1, FreeRDP clients launched with the non-default /cache:codec:rfx option pass desktop stride and height to RemoteFX decoding for Cache Bitmap V3 data while allocating bitmap->data only for the smaller DstWidth and DstHeight in gdi_Bitmap_Decompress, allowing a malicious RDP server to trigger a heap out-of-bounds write with attacker-controlled offset and content. This issue is fixed in version 3.27.1. |
| The Eventin – Event Calendar, Event Registration, Tickets & Booking (AI Powered) plugin for WordPress is vulnerable to authorization bypass due to a regression in versions from 4.0.26 up to and including 4.1.15. This is due to the plugin not properly verifying that a user is authorized to perform an action in the payment_complete() function of PaymentController.php. This makes it possible for unauthenticated attackers to mark unpaid ticket orders as completed by submitting a fabricated SureCart checkout ID or FluentCart cart hash, granting themselves paid event access, QR-code attendee tickets, and order confirmation emails without making any real payment. The wp_rest nonce required to reach the vulnerable endpoint is embedded in every public event page, meaning no WordPress session or credentials are needed to obtain it. This vulnerability represents a regression — the same function and endpoint were previously patched but the fix did not persist through subsequent releases. |
| The Appointment Booking Calendar Plugin and Scheduling Plugin WordPress plugin through 1.1.28 does not validate data before passing it to a PHP deserialization function, allowing unauthenticated attackers to inject arbitrary PHP objects; where a suitable gadget chain is present on the site this can be leveraged to achieve remote code execution. |
| Snipe-IT is an IT asset/license management system. Prior to 8.6.2, when Full Multiple Companies Support and scope_locations_fmcs are enabled, the API location creation endpoint detects an invalid parent-child company mismatch but does not return immediately, allowing creation of a child location under a parent location from a different company. This issue is fixed in version 8.6.2. |
| Improper encoding of non-finite floating-point values during MapMessage JSON serialization in Apache Log4j API produces output that is not valid JSON. This issue affects Apache Log4j API versions 2.13.1 through 2.25.4 and version 2.26.0.
The fix for CVE-2026-34481 did not cover all code paths: when a MapMessage contains a non-finite IEEE 754 value (NaN, Infinity, or -Infinity), MapMessage.asJson() emits the corresponding bare token. RFC 8259 does not permit these tokens, so a conformant parser rejects the resulting document.
The defect is reachable only when both of the following conditions hold:
* The application uses the message resolver https://logging.apache.org/log4j/2.x/manual/json-template-layout.html#event-template-resolver-message of JsonTemplateLayout or any other layout that relies on MapMessage.asJson() or MapMessage.getFormattedMessage(new String[]{"JSON"}).
* The application logs a MapMessage that contains an attacker-controlled floating-point value.
An attacker who can supply a non-finite value can cause the affected layout to emit malformed JSON, which may corrupt the enclosing log record or disrupt downstream log ingestion and parsing.
Users are advised to upgrade to Apache Log4j API 2.25.5 or 2.26.1, both of which emit RFC 8259-compliant JSON for non-finite values. |
| Phalcon is a high-performance, full-stack PHP framework. Prior to 5.15.0, every Phalcon MVC application built with a default router registers a built-in route whose compiled PCRE pattern contains the nested quantifier (/.), and the same construct is produced by the /:params placeholder and the CLI router. Phalcon\Mvc\Router::handle() matches this pattern against the attacker-controlled request URI on every request, so a crafted path such as one containing repeated slashes followed by decoded newlines can trigger catastrophic backtracking and cause CPU exhaustion or route-matching failure. This issue is fixed in version 5.15.0. |
| Phalcon is a high-performance, full-stack PHP framework. Prior to 5.14.1, Phalcon\Encryption\Crypt::decrypt compares the attacker-supplied HMAC tag against the freshly computed HMAC using PHP/Zephir identity comparison, which lowers to a byte-wise comparison that returns early on the first differing byte. This observable timing discrepancy can allow an attacker to recover a valid tag byte-by-byte and attach it to a chosen IV and ciphertext so that decrypt() accepts tampered encrypted content as authentic. This issue is fixed in version 5.14.1. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain a stored cross-site scripting vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability. Exploitation may lead to information disclosure, session theft, or client-side request forgery. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.6, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an Incorrect Authorization vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an Integer overflow or wraparound vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an improper limitation of a pathname to a restricted directory ('path traversal') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to unauthorized file modification. |
| Snipe-IT is an IT asset/license management system. Prior to 8.5.0, ActionlogController::displaySig concatenates the route filename parameter into a private upload-directory path without sanitization, allowing an authenticated attacker to traverse outside the intended directory and read arbitrary files accessible to the web server process. This issue is fixed in version 8.5.0. |
| MCP Server Kubernetes before 3.9.0 contains an argument injection vulnerability in structured tools (kubectl_get, kubectl_describe, kubectl_delete) that allows attackers to bypass the assertNoDangerousFlags security check by supplying resourceType and name parameters with leading dashes. Attackers can inject the --server flag to redirect kubectl commands to an attacker-controlled API server, causing the operator's bearer token to be transmitted externally and enabling full cluster compromise. |
| Snipe-IT is an IT asset/license management system. Prior to 8.6.2, CommonMark escapes raw HTML but does not sanitize javascript: URIs in Markdown hyperlinks, allowing a user with assets.edit permission to place a malicious link in a markdown-textarea custom field that executes arbitrary JavaScript when another user opens the asset detail page and clicks the link. This issue is fixed in version 8.6.2. |
