| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: reject oversized tx_queue_len at netlink parse time
rtnl_create_link() assigns IFLA_TXQLEN directly to dev->tx_queue_len
without going through netif_change_tx_queue_len(), so a device created
with "ip link add ... txqueuelen 500000" bypasses the S16_MAX cap and
still triggers the oversized ring allocations in pfifo_fast, tun and
tap. The veth peer nest (rtnl_nla_parse_ifinfomsg()) and the
RTM_NEWLINK-on-existing-device path reach the same sinks.
Enforce the cap in ifla_policy instead: IFLA_TXQLEN becomes
NLA_POLICY_FULL_RANGE(NLA_U32, &txqlen_range) with
txqlen_range = { .min = 0, .max = S16_MAX }. All netlink consumers
parse against this policy - rtnl_setlink(), rtnl_newlink() (create
and change), and the veth peer nest - so every netlink path is capped
at parse time and rejects the attribute with -ERANGE plus a proper
"integer out of range" extack message before any device state is
modified (the RTM_SETLINK half-application wart is gone with it).
Document the bound in the rt-link.yaml netlink spec.
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y.
- Unprivileged user in a fresh user+net namespace (unshare -Urn):
ip link add v0 txqueuelen 500000 type veth peer name v1
-> on the fixed kernel this is rejected with -ERANGE ("integer out
of range" extack) instead of installing an oversized tx_queue_len
that later inflates pfifo_fast/tun/tap ring allocations.
- ip link set v0 txqueuelen 500000 is likewise rejected at parse time. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix cmd_regs access racing BAR unmap on reset
pdsc_reset_prepare() and pdsc_reset_done()'s pdsc_map_bars() error path
clear/iounmap cmd_regs without devcmd_lock, and
pdsc_legacy_firmware_update()'s download loop derefs cmd_regs after
dropping and retaking the lock without re-checking. An FLR concurrent
with a devlink flash can unmap cmd_regs under an in-flight devcmd,
causing a NULL deref or a write to unmapped MMIO.
Take devcmd_lock across the BAR unmap/remap, and re-check cmd_regs in
the download loop. Only the PF maps cmd_regs and runs devcmd, so skip
the unmap on a VF, as pdsc_remove() and pdsc_reset_done() already do.
A reset that completes entirely within the unlocked window is not a
correctness problem for the image: the device clears its update session,
so a resumed download is rejected, and it verifies the staged image
before writing a flash slot, reporting PDS_RC_BAD_FW rather than
activating it.
pdsc_unmap_bars() also clears info_regs, intr_status and intr_ctrl. The
interrupt and start/stop readers of those are quiesced before the unmap
by pdsc_fw_down(), which frees the interrupts and tears down the queues.
The debugfs readers are not, since those files outlive a reset; that is
pre-existing and out of scope here. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: mark a NULL call argument precise
check_func_arg() allows bpf_register_is_null() for nullable arguments
w/o marking the underlying scalar register precise. Hence a checkpoint
created on such a path would prune against arbitrary scalar value.
check_helper_call() enforces second parameter of the
bpf_get_local_storage() to be zero, w/o marking the underlying scalar
register precise. Hence a checkpoint created on such a path would
prune against arbitrary scalar value.
Grouping these two into one patch, as they share the same fixes tag. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: i3c: serialize probe with bus removal
mctp_i3c_probe() drops busdevs_lock after finding the matching bus. A
concurrent I3C_NOTIFY_BUS_REMOVE can then unregister and free the bus
netdev before probe passes its private data to mctp_i3c_add_device().
The latter consequently adds a list node through a freed mbus pointer.
Keep busdevs_lock held until the device has been added. This also
satisfies the __must_hold annotation on mctp_i3c_add_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: defer qdisc freeing after failed creation
An RTM_NEWQDISC request can make clsact bind a populated shared ingress
block during ->init(), publishing an embedded mini_Qdisc to lockless
readers. If the same request has an invalid TCA_RATE, estimator setup
fails after ->init(); the unwind removes the pointer but synchronously
frees its containing qdisc while tc_run() may still hold it.
Retire failed qdiscs through the same RCU helper as normal destruction.
Inline the synchronous free into the callback now that no direct callers
remain. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix use-after-free race in sample_restore_put()
Concurrent teardown of TC sample rules sharing the same restore
context may re-read restore->count after dropping restore_lock.
At that point another thread may already have completed cleanup and
freed the restore object.
Use the result of the refcount decrement while holding restore_lock to
determine whether cleanup is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put
In mlx5_eswitch_termtbl_put(), the zero-ref cleanup check reads
tt->ref_count after termtbl_mutex has been released. Two concurrent
callers on the same mlx5_termtbl_handle race: one decrements ref_count
to zero, removes the hash entry, and calls kfree(tt) while the other
has already dropped the mutex and is about to evaluate
if (!tt->ref_count), producing a use-after-free.
Fix this by capturing the result of the decrement into a stack-local
last variable before dropping the mutex. The cleanup decision is now
made entirely under termtbl_mutex, and tt is not touched after
kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-Switch, prevent mc_list repopulation during vport disable
In mlx5_esw_vport_disable(), move esw_apply_vport_rx_mode() ahead
of esw_vport_change_handle_locked() so vport->allmulti_rule is
NULL before the change handler observes it.
During FW-fatal recovery the disable runs while dev->state ==
INTERNAL_ERROR. The promisc query inside esw_update_vport_rx_mode()
fails and returns early, leaving vport->allmulti_rule intact, so
esw_update_vport_mc_promisc() runs and adds MLX5_ACTION_ADD entries
to vport->mc_list whose flow rules are then installed in the FDB
by esw_add_mc_addr(). esw_destroy_legacy_table() tears down the
FDB with those refs still held, corrupting the sub-tree and
leaving dangling flow_rule pointers in vport->mc_list.
Two-stage failure on `echo 1 > /sys/bus/pci/devices/<bdf>/reset`:
refcount_t: underflow; use-after-free.
tree_put_node+0xef/0x110 [mlx5_core]
clean_tree+0x44/0xd0 [mlx5_core] (x5)
mlx5_fs_core_cleanup+0x57/0x1c0 [mlx5_core]
mlx5_unload+0x65/0xd0 [mlx5_core]
... mlx5_health_try_recover
BUG: unable to handle page fault for address: 0000000003000055
down_write+0x1c/0x60
mlx5_del_flow_rules+0x33/0x1f0 [mlx5_core]
esw_del_mc_addr+0x7b/0x170 [mlx5_core]
esw_apply_vport_addr_list+0x56/0xf0 [mlx5_core]
esw_vport_change_handle_locked+0x28b/0x310 [mlx5_core]
mlx5_esw_vport_enable+0x270/0x4a0 [mlx5_core]
... mlx5_load ... mlx5_health_try_recover
esw_apply_vport_rx_mode(false, false) clears vport->allmulti_rule
via its local state machine even when the FW del fails. With the
rule NULL the !IS_ERR_OR_NULL(allmulti_rule) gate in the change
handler closes, no rules are installed during disable, and the
reload starts with a clean mc_list. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq_pie: clamp quantum in change path
fq_pie_change() accepts any quantum value from userspace, including 1.
With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1
makes the deficit-refill loop spin ~2^31 times under the qdisc lock
(a soft lockup / denial of service).
Add max(256U, ...) matching fq_codel_change().
Conditions to recreate the bug:
CONFIG_NET_SCH_FQ_PIE=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root fq_pie
tc qdisc change dev dummy0 root fq_pie quantum 1 stab data 32768 size_log 15 cell_log 0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sfq: clamp quantum in change path
sfq_change() accepts any non-negative quantum (only rejects
(int)ctl->quantum < 0). With a crafted size table qdisc_pkt_len reaches
~2 GiB, so quantum=1 makes the deficit-refill loop spin ~2^31 times
under the qdisc lock (a soft lockup / denial of service).
Add max(256U, ...) matching fq_codel_change(). Reject quantum > 1<<20
with -EINVAL, matching fq_codel_change() and the init clamp.
Conditions to recreate the bug:
CONFIG_NET_SCH_SFQ=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root sfq
tc qdisc change dev dummy0 root sfq quantum 1 stab data 32768 size_log 15 cell_log 0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: hhf: clamp quantum in change and init paths
hhf_change() accepts any quantum from userspace, including 1. With a
crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 makes
the deficit-refill loop spin ~2^31 times under the qdisc lock
(a soft lockup / denial of service).
Add max(256U, ...) in hhf_change() matching fq_codel_change(). Clamp
hhf_init() to [256, 1<<20] matching the siblings, and remove the old
fallback that only set quantum=256 on overflow.
Conditions to recreate the bug:
CONFIG_NET_SCH_HHF=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root hhf
tc qdisc change dev dummy0 root hhf quantum 1 stab data 32768 size_log 15 cell_log 0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: drr: clamp quantum in change class
drr_change_class() rejects explicit quantum==0 but falls back to
psched_mtu() with no floor. With a crafted size table qdisc_pkt_len
reaches ~2 GiB, so quantum=1 (or a zero psched_mtu on a headerless
device) makes the deficit-refill loop spin under the qdisc lock.
Add clamp_t(u32, quantum, 256, 1<<20) after the zero reject and on the
fallback path. The explicit-zero reject is preserved.
Conditions to recreate the bug:
CONFIG_NET_SCH_DRR=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root drr
tc class add dev dummy0 parent 1: classid 1:1 drr quantum 1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: ets: clamp quantum in parse and fallback paths
ets_qdisc_change() falls back to psched_mtu() with no floor for bands
without an explicit quantum. With a crafted size table qdisc_pkt_len
reaches ~2 GiB, so a zero psched_mtu on a headerless device makes the
deficit-refill loop spin under the qdisc lock.
Move the floor into ets_quantum_parse() so explicitly configured quanta
are also clamped to [256, 1<<20], not just the fallback path.
Conditions to recreate the bug:
CONFIG_NET_SCH_ETS=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root ets bands 3 strict 2 quanta 1 1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix NULL pointer dereference on unbind with fixed-link
When the device tree describes a fixed-link and has no "mdio" child
node, macb_mii_init() returns early without allocating the MDIO bus,
leaving bp->mii_bus as NULL.
Two cleanup paths then dereference this NULL bus:
1. On driver unbind, macb_remove() unconditionally calls
mdiobus_unregister(bp->mii_bus), which oopses:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000004a8
pc : mdiobus_unregister+0x14/0xa4
lr : macb_remove+0x38/0xa4
Call trace:
mdiobus_unregister+0x14/0xa4 (P)
macb_remove+0x38/0xa4
platform_remove+0x20/0x30
device_release_driver_internal+0x1c8/0x224
unbind_store+0xb4/0xbc
2. On the probe error path in macb_probe(), reached when
macb_mii_init() has succeeded but a subsequent step fails, the
err_out_unregister_mdio label runs the same unconditional cleanup.
mdiobus_unregister() and mdiobus_free() do not guard against a NULL
bus, so guard the calls in both macb_remove() and the probe error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject non-scalar bpf_loop iteration counts
bpf_loop() declares its nr_loops argument as ARG_ANYTHING. Privileged
programs may pass pointer values to such arguments, so check_func_arg()
lets a pointer-valued R1 reach the helper-specific checks.
Since commit bb124da69c47 ("bpf: keep track of max number of bpf_loop
callback iterations"), the verifier marks R1 precise and reads its upper
bound to limit callback simulation. Precision backtracking only accepts
scalar registers, so passing a pointer instead triggers the "backtracking
misuse" verifier warning. Kernels with panic_on_warn enabled subsequently
panic.
Introduce ARG_SCALAR for helper arguments that only accept scalar values
and use it for bpf_loop() nr_loops. Generic helper argument validation then
rejects pointers before loop inlining and precision processing. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Decoupling ep1_in_urb in caiaq dev
The epq_in_urb object belonging to the caiaq device is coupled within
the struct snd_usb_caiaqdev. After usb_submit_urb(epq_in_urb, GFP_KERNEL)
executes successfully, epq_in_urb is successfully added to the urbp_list
queue of the dummy HCD driver (userspace specifies dummy_hcd as the HCD
layer driver for the caiaq USB device).
When init_card() calls snd_usb_caiaq_send_command() which subsequently
fails due to a timeout, and proceeds to call snd_card_free() to release
the card, the embedded ep1_in_urb object is also freed. When the dummy
HCD driver detects that the URB has been unlinked, it returns the URB
(by usb_hcd_giveback_urb()), which triggers [1].
Decouple the ep1_in_urb object from the struct snd_usb_caiaqdev and switch
to using a pointer instead. Separately allocate and manage the memory for
ep1_in_urb to prevent the release of the snd_card memory object from
interfering with it.
midi_out_urb has the same issue as ep1_in_urb and is handled in the same
way.
[1]
BUG: KASAN: slab-use-after-free in usb_free_urb+0x24/0x120 drivers/usb/core/urb.c:96
Write of size 4 at addr ffff88803cee1050 by task ktimers/1/29
Call Trace:
usb_free_urb+0x24/0x120 drivers/usb/core/urb.c:96
dummy_timer+0xaac/0x4d50 drivers/usb/gadget/udc/dummy_hcd.c:2019
__run_hrtimer kernel/time/hrtimer.c:2067 [inline]
__hrtimer_run_queues+0x3eb/0xaf0 kernel/time/hrtimer.c:2124
hrtimer_run_softirq+0x1e1/0x2e0 kernel/time/hrtimer.c:2141
Allocated by task 36:
snd_card_new+0x7b/0x110 sound/core/init.c:184
create_card sound/usb/caiaq/device.c:429 [inline]
snd_probe+0x236/0x1af0 sound/usb/caiaq/device.c:544
Freed by task 36:
snd_card_free_when_closed sound/core/init.c:630 [inline]
snd_card_free+0x138/0x1d0 sound/core/init.c:662
snd_probe+0x162b/0x1af0 sound/usb/caiaq/device.c:553 |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: delimit inode_share cache key components
Previously, inode_share keys were encoded as follows:
fingerprint || domain_id
It would be better to have a separator between the fingerprint and domain
ID so that the fingerprint won't be parsed as part of a domain ID.
Change the key encoding as follows:
domain_id || '\0' || fingerprint
Since domain_id is a NUL-terminated string, this makes the in-memory key
indices unambiguous. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/riscv: Serialize command queue publishing
Serialize command queue publishing so software producer state advances only
after a command is written and the hardware tail is updated. Wait for
hardware consumption outside the queue lock when the command queue is full
so other CPUs are not blocked behind a long poll. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Do not reallocate GA log buffers on resume
Commit c5e1a1eb9279 ("iommu/amd: Simplify and Consolidate Virtual APIC
(AVIC) Enablement") moved the GA log allocation from iommu_init_pci()
to enable_iommus_vapic(), which is called on every resume.
iommu_init_ga_log() assigns iommu->ga_log and iommu->ga_log_tail
unconditionally. Each resume therefore replaces the boot-time pointers
and leaks both old allocations. The function also uses GFP_KERNEL from a
syscore resume callback, where interrupts are disabled and the non-boot
CPUs are offline.
Return early if both buffers are already allocated. Clear the pointers
in free_ga_log() so a partial allocation failure cannot leave ga_log
dangling. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix ineffective error check in nested domain allocation
amd_iommu_pdom_id_alloc() returns an int: a domain ID on success, or the
negative errno from ida_alloc_range() when the ID space is exhausted or
memory is short. amd_iommu_alloc_domain_nested() stores that return value
in gdom_info->hdom_id, which is a u32, and only then tests it:
gdom_info->hdom_id = amd_iommu_pdom_id_alloc();
if (gdom_info->hdom_id <= 0) {
The assignment discards the sign, so -ENOSPC becomes 0xffffffe4 and the
test never fires. The nested domain is then set up with a host domain ID
that was never allocated, instead of the allocation failing with -ENOSPC.
Keep the value in an int, test it there, and store it only once it is
known to be valid, which is what the other amd_iommu_pdom_id_alloc()
callers already do. |
