| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: ensure names are nul-terminated
Reject names that lack a \0 character before feeding them
to functions that expect c-strings.
Fixes tag is the most recent commit that needs this change. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: gadget: Fix spin_lock/unlock mismatch in dwc2_hsotg_udc_stop()
dwc2_gadget_exit_clock_gating() internally calls call_gadget() macro,
which expects hsotg->lock to be held since it does spin_unlock/spin_lock
around the gadget driver callback invocation.
However, dwc2_hsotg_udc_stop() calls dwc2_gadget_exit_clock_gating()
without holding the lock. This leads to:
- spin_unlock on a lock that is not held (undefined behavior)
- The lock remaining held after dwc2_gadget_exit_clock_gating() returns,
causing a deadlock when spin_lock_irqsave() is called later in the
same function.
Fix this by acquiring hsotg->lock before calling
dwc2_gadget_exit_clock_gating() and releasing it afterwards, which
satisfies the locking requirement of the call_gadget() macro. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1780: fix PM runtime leak on error path
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis: Fix NULL pointer dereference in adis_init
The adis_init() function dereferences adis->ops to check if the
individual function pointers (write, read, reset) are NULL, but does
not first check if adis->ops itself is NULL.
Drivers like adis16480, adis16490, adis16545 and others do not set
custom ops and rely on adis_init() assigning the defaults. Since struct
adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL
when adis_init() is called, causing a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : adis_init+0xc0/0x118
Call trace:
adis_init+0xc0/0x118
adis16480_probe+0xe0/0x670
Fix this by checking if adis->ops is NULL before dereferencing it,
falling through to assign the default ops in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix a few more NULL pointer dereference in device cleanup
I found a few more paths that cleanup fails due to a NULL version pointer
on unsupported hardware.
Add NULL checks as applicable.
(cherry picked from commit f5a05f8414fc10f307eb965f303580c7778f8dd2) |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: Shuffle the tx ring before enabling tx
Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board,
the rootfs may take an extended time to recover after a suspend.
Upon investigation, it was determined that the issue originates from a
problem in the macb driver.
According to the Zynq UltraScale TRM [1], when transmit is disabled,
the transmit buffer queue pointer resets to point to the address
specified by the transmit buffer queue base address register.
In the current implementation, the code merely resets `queue->tx_head`
and `queue->tx_tail` to '0'. This approach presents several issues:
- Packets already queued in the tx ring are silently lost,
leading to memory leaks since the associated skbs cannot be released.
- Concurrent write access to `queue->tx_head` and `queue->tx_tail` may
occur from `macb_tx_poll()` or `macb_start_xmit()` when these values
are reset to '0'.
- The transmission may become stuck on a packet that has already been sent
out, with its 'TX_USED' bit set, but has not yet been processed. However,
due to the manipulation of 'queue->tx_head' and 'queue->tx_tail',
`macb_tx_poll()` incorrectly assumes there are no packets to handle
because `queue->tx_head == queue->tx_tail`. This issue is only resolved
when a new packet is placed at this position. This is the root cause of
the prolonged recovery time observed for the NFS root filesystem.
To resolve this issue, shuffle the tx ring and tx skb array so that
the first unsent packet is positioned at the start of the tx ring.
Additionally, ensure that updates to `queue->tx_head` and
`queue->tx_tail` are properly protected with the appropriate lock.
[1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: clear walk_control on inactive context in damos_walk()
damos_walk() sets ctx->walk_control to the caller-provided control
structure before checking whether the context is running. If the context
is inactive (damon_is_running() returns false), the function returns
-EINVAL without clearing ctx->walk_control. This leaves a dangling
pointer to a stack-allocated structure that will be freed when the caller
returns.
This is structurally identical to the bug fixed in commit f9132fbc2e83
("mm/damon/core: remove call_control in inactive contexts") for
damon_call(), which had the same pattern of linking a control object and
returning an error without unlinking it.
The dangling walk_control pointer can cause:
1. Use-after-free if the context is later started and kdamond
dereferences ctx->walk_control (e.g., in damos_walk_cancel()
which writes to control->canceled and calls complete())
2. Permanent -EBUSY from subsequent damos_walk() calls, since the
stale pointer is non-NULL
Nonetheless, the real user impact is quite restrictive. The
use-after-free is impossible because there is no damos_walk() callers who
starts the context later. The permanent -EBUSY can actually confuse
users, as DAMON is not running. But the symptom is kept only while the
context is turned off. Turning it on again will make DAMON internally
uses a newly generated damon_ctx object that doesn't have the invalid
damos_walk_control pointer, so everything will work fine again.
Fix this by clearing ctx->walk_control under walk_control_lock before
returning -EINVAL, mirroring the fix pattern from f9132fbc2e83. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_helper: pass helper to expect cleanup
nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()
to remove expectations belonging to the helper being unregistered.
However, it passes NULL instead of the helper pointer as the data
argument, so expect_iter_me() never matches any expectation and all
of them survive the cleanup.
After unregister returns, nfnl_cthelper_del() frees the helper
object immediately. Subsequent expectation dumps or packet-driven
init_conntrack() calls then dereference the freed exp->helper,
causing a use-after-free.
Pass the actual helper pointer so expectations referencing it are
properly destroyed before the helper object is freed.
BUG: KASAN: slab-use-after-free in string+0x38f/0x430
Read of size 1 at addr ffff888003b14d20 by task poc/103
Call Trace:
string+0x38f/0x430
vsnprintf+0x3cc/0x1170
seq_printf+0x17a/0x240
exp_seq_show+0x2e5/0x560
seq_read_iter+0x419/0x1280
proc_reg_read+0x1ac/0x270
vfs_read+0x179/0x930
ksys_read+0xef/0x1c0
Freed by task 103:
The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888003b14d00, ffff888003b14dc0) |
| A maliciously crafted MODEL file, when parsed through certain Autodesk products, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process. |
| A maliciously crafted CATPART file, when parsed through certain Autodesk products, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: Fix URB memory leak on submit failure
When usb_submit_urb() fails in usbio_probe(), the previously allocated
URB is never freed, causing a memory leak.
Fix this by jumping to err_free_urb label to properly release the URB
on the error path. |
| A maliciously crafted SLDPRT file, when parsed through certain Autodesk products, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| A maliciously crafted SLDPRT file, when parsed through certain Autodesk products, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| A maliciously crafted PRT file, when parsed through certain Autodesk products, can force a Memory Corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted PRT file, when parsed through certain Autodesk products, can force a Memory corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted SLDPRT file, when parsed through certain Autodesk products, can force a Memory corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process. |
| A maliciously crafted CATPRODUCT file, when parsed through certain Autodesk products, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| A maliciously crafted PRT file, when parsed through certain Autodesk products, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| A maliciously crafted PRT file, when parsed through certain Autodesk products, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbtmc: Flush anchored URBs in usbtmc_release
When calling usbtmc_release, pending anchored URBs must be flushed or
killed to prevent use-after-free errors (e.g. in the HCD giveback
path). Call usbtmc_draw_down() to allow anchored URBs to be completed. |
