Export limit exceeded: 400097 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (400097 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97918 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Undo the registration when enabling the histogram trigger fails Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers list") described how a trigger that is registered but not on file->triggers ends up freed while still on the global named_triggers list, and moved the registration down so that hist_trigger_enable() follows it immediately. One path still gets there. hist_trigger_enable() adds the trigger and takes it straight back out when the event cannot be enabled: list_add_tail_rcu(&data->list, &file->triggers); update_cond_flag(file); if (trace_event_trigger_enable_disable(file, 1) < 0) { list_del_rcu(&data->list); update_cond_flag(file); ret--; } so the list walk in hist_unregister_trigger() matches nothing, test stays NULL, and the ->free() that would call del_named_trigger() is skipped. out_unreg falls through to out_free, which frees the trigger anyway: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff8880091d3160 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 69: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Leave the trigger where hist_unregister_trigger() can find it and let that undo the registration, which is the only code that knows all of what cmd_ops->init() took: the named list entry, the hist_pad reference, the reference on the trigger a named histogram is shared with, and the copied cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(), whose sm_ref and buffered event reference are otherwise left behind. Since ->free() releases trigger_data and, for a trigger that does not share its histogram, hist_data with it, out_unreg can no longer fall through to out_free. For a trigger that does share, hist_register_trigger() has already destroyed the caller's hist_data, so the fall-through was reading freed memory there as well. Move the enable_timestamps check in hist_unregister_trigger() above the ->free() call for the same reason: hist_data does not outlive it once the trigger being removed is the one that owns it. | ||||
| CVE-2026-97920 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the entry count when the histogram stats allocation fails print_entries() uses n_entries both as the number of sort entries and as its own return value, so the -ENOMEM it stores when the stats allocation fails overwrites the count that the cleanup still needs: n_entries = tracing_map_sort_entries(map, ...); if (n_entries < 0) return n_entries; ... if (!stats) { n_entries = -ENOMEM; goto out; } ... out: tracing_map_destroy_sort_entries(sort_entries, n_entries); tracing_map_destroy_sort_entries() takes an unsigned int and loops up to it, so -ENOMEM arrives as 4294967284. It walks an array of at most map->max_elts pointers and calls destroy_sort_entry(), which dereferences and frees, on whatever lies past the end. Reading the hist file of a trigger with a .percent value, with that allocation forced to fail: BUG: KASAN: vmalloc-out-of-bounds in tracing_map_destroy_sort_entries+0xa0/0xb0 Read of size 8 at addr ffffc90000045000 by task init/1 tracing_map_destroy_sort_entries+0xa0/0xb0 hist_show+0x6f7/0x1df0 seq_read_iter+0x2b8/0x1190 vfs_read+0x176/0xa40 The buggy address belongs to a 4-page vmalloc region starting at ffffc90000041000 allocated at tracing_map_sort_entries+0x5c/0xd50 A few pages further the fault is fatal. The registers at the oops confirm the bound: the loop's end pointer less the array start, over the pointer size, is 4294967284. Return the error in a separate variable and leave n_entries holding the count, the way tracing_map_sort_entries() does on its own error path. The stats block is only entered for a value carrying .percent or .graph, which __create_val_field() has rejected since v6.3, so this cannot be reached in mainline as it stands. It becomes reachable again with "tracing: hist: let values keep the percent and graph modifiers", so it should be applied first. | ||||
| CVE-2026-97921 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram the field rejected for a bad modifier Writing a hist trigger whose value or variable carries a modifier that is not allowed there leaks the fields that were built for it. __create_val_field() takes the field from parse_expr() and stores it in hist_data->fields[] only after the modifier checks have run: hist_field = parse_expr(hist_data, file, field_str, flags, var_name, &n_subexprs); ... if (hist_field->flags & HIST_FIELD_FL_VAR) { if (hist_field->flags & (...)) goto err; } else { if (hist_field->flags & (...)) goto err; } hist_data->fields[val_idx] = hist_field; Both checks jump past that store, and the err label returns without freeing anything. The error unwinds to create_hist_data(), which calls destroy_hist_data() -> destroy_hist_fields(), and that reaches a field only by walking fields[]. A field that never got there is unreachable. commit e0213434fe3e ("tracing: Do not let histogram values have some modifiers") set ret to -EINVAL and fell through to the store, which left the field owned by fields[] and freed along with the rest of hist_data. Splitting the check into a value case and a variable case replaced that fall-through with a goto that skips it. With CONFIG_DEBUG_KMEMLEAK, 200 writes of # echo 'hist:keys=prev_pid:vals=next_pid.log2' > \ events/sched/sched_switch/trigger each correctly rejected with -EINVAL, leave 332 unreferenced objects (63744 bytes) reported at create_hist_field(); 200 install and remove cycles of a valid trigger leave none. A '.log2' field is two allocations, since create_hist_field() puts the plain field in operands[0] of the log2 field, and both are reported. Use destroy_hist_field() rather than __destroy_hist_field() so that operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF, which is what an operand owned by hist_data->var_refs[] needs; the rejected field itself is never a var ref, because a var ref never carries a modifier flag. | ||||
| CVE-2026-97922 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram var refs regardless of how often they are referenced Using the same variable three or more times in one hist trigger leaks the variable reference and its strings when the trigger is removed. commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy var_refs") made a trigger's var_refs[] array the only owner of a var ref: destroy_hist_field() returns early for HIST_FIELD_FL_VAR_REF, so the field expressions never destroy one. One entry, freed once, no count needed. commit 8bcebc77e85f ("tracing: Fix histogram code when expression has same var as value") then made repeated references share one object and added a count of them. Only the increment side exists, since those expressions still return early and never drop a reference, so __destroy_hist_field() sees how many references were created rather than how many are left. It frees when the decremented count is 0 or 1, so two references work and three or more leak. Sharing kept one array entry per object, and create_var_ref() searches and appends within a single trigger, so nothing outside it holds the object. Removing a trigger whose variables are still referenced is already refused by check_var_refs() with -EBUSY. Drop the count and free unconditionally. | ||||
| CVE-2026-97926 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ufs: validate cylinder group metadata before caching it ufs_read_cylinder() copies the cylinder group index and the rotor positions straight from the on-disk group and caches them without any check: ucpi->c_cgx = fs32_to_cpu(sb, ucg->cg_cgx); ucpi->c_rotor = fs32_to_cpu(sb, ucg->cg_rotor); ucpi->c_frotor = fs32_to_cpu(sb, ucg->cg_frotor); ucpi->c_irotor = fs32_to_cpu(sb, ucg->cg_irotor); They are then used as indices during allocation and free: - c_cgx indexes the cylinder summary array as UFS_SB(sb)->fs_cs(ucpi->c_cgx), so a value past s_ncg writes a 32 bit count outside the s_csp allocation. - c_frotor becomes a bitmap scan start, start = c_frotor >> 3, and then length = ((s_fpg + 7) >> 3) - start. A start beyond the block bitmap wraps the unsigned length to a huge value, so ubh_scanc() walks far past the cylinder group buffers. c_irotor drives the inode bitmap the same way. A crafted image can set any of these freely, turning an ordinary allocation into an out of bounds access. Reject a cylinder group whose recorded index does not match the group being read, or whose rotors fall outside the group, before the metadata is cached. Valid filesystems keep cg_cgx equal to the group number and the rotors within the group, so only malformed images are rejected. | ||||
| CVE-2026-97930 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: fix in04_last array size mismatch with in04_buf The in04_last array in struct usx2ydev is declared as char[24], but in04_buf is allocated as sizeof(struct us428_ctls) which is 21 bytes. In i_usx2y_in04_int(), when ctl_snapshot_last == -2 (initialization path): memcpy(usx2y->in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last)); This copies 24 bytes from a 21-byte slab allocation, reading 3 bytes past the end of the source object. Introduce a USX2Y_IN04_SIZE constant defined as sizeof(struct us428_ctls) and use it consistently for the in04_last array, the in04_buf allocation, the URB transfer length, and the comparison loop, replacing the bare 24 and 21 literals throughout. | ||||
| CVE-2026-82355 | 1 Apache | 1 Airflow | 2026-09-25 | 4.2 Medium |
| When a request to the Airflow core API carries both a session cookie and an explicit `Authorization: Bearer` token, Airflow resolves the caller from the cookie and ignores the bearer token, inverting the intended precedence of bearer over cookie. The request then executes -- and is recorded in the audit log -- as the cookie's principal rather than the identity the client explicitly presented. Only Apache Airflow 3.3.0 and 3.3.1 are affected. Earlier releases do not contain the code path that caches the cookie-derived user, and are not vulnerable. Exploiting this requires an attacker to first place a valid session cookie of their own into the victim's browser or client: for example by cookie tossing from a sibling subdomain, through cross-site scripting in a separate application sharing a parent domain, or via a shared workstation. Deployments that host the Airflow UI on a domain shared with other applications are therefore the most exposed; a deployment on a dedicated domain with no co-hosted applications is not reachable this way. The consequence is principal confusion and misattributed audit records rather than a direct privilege escalation. Users of 3.3.0 or 3.3.1 should upgrade to Apache Airflow 3.3.2 or later, which resolves the caller from the explicitly supplied credential whenever one is present. | ||||
| CVE-2026-62699 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-09-25 | 6.8 Medium |
| Null pointer dereference in Windows Universal Disk Format File System Driver (UDFS) allows an authorized attacker to execute code locally. | ||||
| CVE-2026-97931 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Prevent write upgrades for read mappings The hwdep mmap callback rejects read-buffer mappings that are initially writable, but leaves VM_MAYWRITE set on mappings created with PROT_READ. A process that can open the hwdep node O_RDWR can later use mprotect() to make the mapping writable. The read allocation begins with struct usb_stream. Its read_size member is used by the fault handler to decide which pages belong to the read buffer. The read VMA intentionally remains expandable because pcm_usb_stream uses mremap() after reading that size. Changing read_size first can therefore map and access pages beyond the allocation. The same member is also consumed by usb_stream_free(), where changing it can make free_pages_exact() release pages outside the allocation. Clear VM_MAYWRITE for read-buffer mappings after rejecting an initially writable VMA. This keeps the separate output-buffer mapping writable while preventing later permission upgrades. | ||||
| CVE-2026-97948 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: Fix recursive locking on devices without EEH sensitive driver The commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug safe") refactored the EEH code such that the pci_rescan_remove_lock is held at the beginning of eeh_handle_normal_event() and the eeh_reset_device() is called with that lock being held. Looks like the commit missed to remove the existing lock/unlock inside eeh_rmv_device() which is no longer necessary. This is causing the eehd to hang on the lock which it actually holds when that code path is taken. [<0>] 0xc00000011c78f870 [<0>] __switch_to+0xfc/0x1a0 [<0>] pci_lock_rescan_remove+0x30/0x44 [<0>] eeh_rmv_device+0x290/0x2e0 [<0>] eeh_pe_dev_traverse+0x80/0x130 [<0>] eeh_reset_device+0xcc/0x23c [<0>] eeh_handle_normal_event+0x830/0xa80 [<0>] eeh_event_handler+0xf8/0x190 [<0>] kthread+0x194/0x1b0 [<0>] start_kernel_thread+0x14/0x18 The issue is seen for cases where the errors are detected on the PHB directly AND|OR for devices where the driver error_detected() returns PCI_ERS_RESULT_NEED_RESET, and driver being not EEH sensitive(i.e no error handlers like slot_reset(), resume() etc defined). | ||||
| CVE-2026-100072 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: platform: Use acpi_bus_get_primary_device() The acpi_get_first_physical_node() usage in acpi_platform_fill_resource() and acpi_create_platform_device() is generally unsafe because in theory the device returned by it may be freed at any time [1]. It is also inefficient because acpi_get_first_physical_node() is called multiple times for the same argument which can be avoided. Address these issues by using acpi_bus_get_primary_device() instead of acpi_get_first_physical_node() and adjusting the code to call it just once at the beginning of and acpi_create_platform_device() and drop the device reference acquired by it upon the return from that function. | ||||
| CVE-2026-97564 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.idmap descriptions cifs.idmap key descriptions carry authority-bearing fields (owner and group SIDs and uid/gid values in "os:"/"gs:"/"oi:"/"gi:" form) that the cifs.idmap upcall helper treats as kernel-originating inputs. Unlike its sibling cifs.spnego, the cifs.idmap key type has no vet_description hook, so userspace can create keys of this type through request_key(2)/add_key(2) and supply those fields without CIFS origin. A request_key(2) call with a non-NULL callout then drives a root usermodehelper upcall (/sbin/request-key -> cifs.idmap) that consumes the unvetted description in root context. Only accept cifs.idmap descriptions while CIFS is using its private root_cred to request the key. id_to_sid()/sid_to_id() already run under override_creds(root_cred), so the kernel-originated path is unaffected. This mirrors commit 3da1fdf4efbc ("smb: client: reject userspace cifs.spnego descriptions"), which applied the same restriction to cifs.spnego. | ||||
| CVE-2026-100074 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf_refcount field as unique BPF_REFCOUNT is not marked as a unique field, while it should be. Fix this oversight. | ||||
| CVE-2026-100077 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Recover HW before retire hung submit During recovery, it is not safe to retire the hung submit before we recover the GPU. Retiring the submit triggers BO free and that can result in GPU pagefaults since the GPU may be actively accessing those BOs. To fix this, retire the submits after gpu recovery is complete in recover_worker(). Patchwork: https://patchwork.freedesktop.org/patch/730655/ | ||||
| CVE-2026-97588 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Map EBUSY to EIO when key conversion fails repeatedly When hardware persistently returns -EBUSY after exhausting retries, the error propagates to crypto_finalize_*_request(). The crypto API's completion wrapper treats -EBUSY as a queueing status and swallows it, preventing the completion callback from firing. This causes callers using crypto_wait_req() to block indefinitely. Translate persistent -EBUSY to -EIO after retry exhaustion to ensure proper error propagation and callback invocation. | ||||
| CVE-2026-75658 | 1 Adobe | 2 Adobe Bridge, Bridge | 2026-09-25 | 7.8 High |
| Bridge is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-75663 | 1 Adobe | 2 Adobe Bridge, Bridge | 2026-09-25 | 7.8 High |
| Bridge is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-75665 | 1 Adobe | 2 Adobe Bridge, Bridge | 2026-09-25 | 7.8 High |
| Bridge is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-75676 | 1 Adobe | 2 Adobe Bridge, Bridge | 2026-09-25 | 7.8 High |
| Bridge is affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-98144 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: put the chained BO when its mapping fails amdxdna_cmd_set_error() looks up the first BO of a command chain, which takes a reference, and drops it at the end of the function. The mapping of that BO is established in between, and the failure path returns without the put, so the reference is leaked. Ordinary use does not reach it. The chain has been submitted before any of this runs, so aie2_cmdlist_fill_slot() has already called amdxdna_cmd_get_op() on that BO and amdxdna_gem_vmap() has cached its address. What makes it reachable is that the BO is resolved again by handle here, and the handle is userspace's to recycle: closing it after submission and importing a dma-buf whose exporter implements no vmap onto the same id leaves amdxdna_gem_get_obj() returning an object this cannot map, since prime_import() types every import AMDXDNA_BO_SHARE. | ||||