| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| VeraCrypt provides disk encryption with strong security based on TrueCrypt. In 1.26.29 and earlier, selected metadata IOCTL handlers in the VeraCrypt Windows veracrypt.sys driver accept caller-supplied object-manager and device paths broader than supported VeraCrypt workflows require. A local user who can open the intentionally user-accessible \.\VeraCrypt device can use TC_IOCTL_GET_RESOLVED_SYMLINK, TC_IOCTL_GET_DRIVE_PARTITION_INFO, VC_IOCTL_GET_DRIVE_GEOMETRY_EX, or the legacy TC_IOCTL_GET_DRIVE_GEOMETRY handler to make src/Driver/Ntdriver.c perform kernel-context symbolic-link or disk-device lookups outside the intended path scope. This can disclose low-sensitivity drive-letter targets, partition information, disk geometry, GPT or MBR state, and limited object-manager path metadata. |
| EspoCRM is an open source customer relationship management application. Prior to 10.0.3, a user with email-template edit access and mass-email sending access can reference restricted record fields in a template because the renderer stops filtering those fields when per-user ACL application is disabled. The same behavior affects group email auto-replies when a regular user can edit the selected template, even though an administrator controls the group email. Rendered messages can disclose restricted user fields. This issue is fixed in version 10.0.3. |
| Redash is a package for data visualization and sharing. From 10.0.0 until 26.9.0, the JSON data source query runner in redash/query_runner/json_ds.py used _get_all_results() to combine its configured base_url with a user-supplied query URL by using urljoin. An absolute query URL replaced the configured base URL instead of remaining under it, allowing a user with execute_query permission to direct a server-side request to an arbitrary external origin. When HTTP Basic Auth was configured for the data source, the request also forwarded those credentials to the selected origin. Private and internal address access remained constrained when REDASH_ENFORCE_PRIVATE_IP_BLOCK was enabled. This issue is fixed in version 26.9.0. |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to 26.1.11, OPNsense\Core\ACL::hasPrivilege() appends a directly assigned comma-separated <priv> value as one string and then uses an exact comparison when checking user-config-readonly. A user directly assigned both a component write privilege and user-config-readonly can therefore be treated as lacking the read-only restriction, and MVC APIs protected by throwReadOnly() can persist configuration changes for that component. Group privileges are not affected by the same parser flaw because the group path already splits comma-separated values. This issue is fixed in version 26.1.11. |
| EspoCRM is an open source customer relationship management application. Prior to 9.3.10, an authenticated administrator can provide crafted input to the administrative Label Manager. Insufficient path validation allows traversal outside the intended directory and permits reading, modifying, creating, or deleting JSON files accessible to the application, subject to filesystem permissions and server configuration. This issue is fixed in version 9.3.10. |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the NTP GPS page stores the operator-supplied initcmd value in base64 form, applies legacy_html_escape_form_data() to the encoded string, and then uses base64_decode() to decode the value directly into the GPS initialization-command textarea in src/www/services_ntpd_gps.php. Because decoding occurs after escaping, stored HTML remains unescaped at the output sink. A user with page-services-ntp-gps privilege can store a value that closes the textarea, and script executes in the session of any user who later opens the GPS page. The script can read CSRF material and perform authenticated actions, including actions available to an administrator. This issue is fixed in version 26.1.11. |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the Firewall Alias GeoIP importer's process_zip() and process_gzip() paths in src/opnsense/scripts/filter/lib/alias/geoip.py use an unvalidated CSV country_code value to construct output filenames below /usr/local/share/GeoIP/alias. A user with Firewall Alias Edit privilege can configure an attacker-controlled GeoIP source URL and supply an archive whose country code traverses into another existing directory, causing attacker-controlled content to be written as root with an -IPv4 or -IPv6 suffix. A crafted newsyslog fragment and oversized log file can use the default hourly root cron job to execute commands as root, resulting in complete firewall compromise. This issue is fixed in version 26.1.11. |
| WeGIA is a web manager for charitable institutions. Prior to 3.8.6, the unauthenticated web/html/socio/sistema/cadastro_cobrancas_geracao.php endpoint accepts form-encoded POST data through extract($_REQUEST) and interpolates codigo, descricao, data_emissao, data_vencimento, data_pagamento, valor, valor_pago, status, link_cobranca, link_boleto, linha_digitavel, and id_socio into a raw INSERT statement. Numeric parameters are unquoted and unvalidated, while string parameters can break out of their single-quoted SQL context. A remote attacker can execute arbitrary SQL to read or modify billing, member, employee, permission, and credential data or to delete database tables. This issue is fixed in version 3.8.6. |
| InvoiceShelf is an open-source web & mobile app that helps track expenses, payments and create professional invoices and estimates. In version 2.3.3 and earlier, InvoiceShelf bulk-delete request validation accepts record identifiers without consistently binding them to the authenticated user's company_id. The affected DeleteCustomersRequest, DeleteEstimatesRequest, DeleteExpensesRequest, DeleteInvoiceRequest, DeleteItemsRequest, DeletePaymentsRequest, and DeleteUserRequest validators check that identifiers exist but do not consistently check tenant ownership. An authenticated user can submit another company's identifier and delete cross-company records. This vulnerability is fixed in 2.4.0. |
| EspoCRM is an open source customer relationship management application. Prior to 9.3.9, a user with Email Template or PDF Template edit permission can store crafted HTML that bypasses moderateSanitizeHtml(). When another user opens the template in edit mode and clientCspDisabled is true, the stored payload executes and can hijack the user's session. This issue is fixed in version 9.3.9. |
| util-linux is a random collection of Linux utilities. Before util-linux 2.41.4, `parse_dos_extended()` in `libblkid/src/partitions/dos.c` computes an extended-partition start sector with 32-bit addition and does not apply the extended-area bounds checks to the first two EBR entries. A local attacker who causes a crafted DOS extended-partition disk image or removable medium to be probed can wrap `cur_start + start` to sector zero and cause libblkid to report a false partition overlapping the MBR. This directly compromises the integrity of the reported partition metadata; disk modification or availability loss requires a separate downstream consumer to act on that metadata. This issue is fixed in 2.41.4. |
| util-linux is a random collection of Linux utilities. In util-linux 2.39.1 through 2.41.4 and 2.42 through 2.42.1, the SUID `mount` utility reads the attacker-controlled `LIBMOUNT_FORCE_MOUNT2` environment variable with `getenv()`, allowing a local low-privileged
user to force the non-atomic legacy bind-mount path. With an `/etc/fstab` bind mount authorized by `user` or `users` and protected by `nosuid`, `noexec`, or `nodev`, an attacker can race the window between the initial bind mount and the remount that applies those security flags and execute a SUID program from the temporarily unprotected mount, potentially gaining root privileges. This issue is fixed in 2.41.5 and 2.42.2. |
| util-linux is a random collection of Linux utilities. In util-linux 2.17 through 2.41.6 and 2.42 through 2.42.3, and in 2.42.4 when the legacy `mount(2)` path is used without `/proc`, restricted non-root `mount` requests validate an `/etc/fstab` target before the mount operation re-resolves that pathname. A local low-privileged user authorized by an fstab `user` or `users` entry whose target has an attacker-writable ancestor can use `renameat2(RENAME_EXCHANGE)` to swap a path component and redirect an authorized mount to a root-owned location, such as mounting attacker-controlled content over `/etc/sudoers.d`, and thereby gain root privileges. Versions 2.41.5 and 2.42.2 pin targets for the new mount API, and 2.42.4 pins legacy targets through `/proc/self/fd`; the documented legacy fallback without `/proc` remains affected. |
| EspoCRM is an open source customer relationship management application. Prior to 9.3.9, an authenticated administrator can place crafted content in the applicationName setting through CSP nonce injection. The persistent injection is inserted into the main application page without escaping, allowing attacker-controlled JavaScript to run in users' sessions and leak page data, including unsaved user input. This issue is fixed in version 9.3.9. |
| EspoCRM is an open source customer relationship management application. From 8.1.0 until 9.3.8, an authenticated non-administrator can submit a crafted where parameter to the GET entity streamAttachments endpoint because that query path permits complex expressions. Boolean-based blind SQL injection can extract arbitrary database information, including active administrator session tokens, and can enable full privilege escalation. This issue is fixed in version 9.3.8. |
| EspoCRM is an open source customer relationship management application. Prior to 9.3.7, a low-privileged user who can access a shared TargetList can invoke opt-out or cancel-opt-out actions for a protected Contact or Lead that the user cannot read or edit. The service validates access to the target list but retrieves the target record without the required record authorization, allowing unauthorized changes to its opted_out relationship state. This issue is fixed in version 9.3.7. |
| EspoCRM is an open source customer relationship management application. Prior to 9.3.7, an authenticated user with Import scope access can send POST /api/v1/Import/{id}/exportErrors with another user's import identifier and retrieve an attachment identifier for a CSV containing rows from that import. The endpoint performs a scope-level check but omits the entity-level ownership check enforced by the Import AccessChecker and sibling Import endpoints. This issue is fixed in version 9.3.7. |
| Out-of-bounds read in Microsoft Office Outlook allows an unauthorized attacker to disclose information over a network. |
| Netgate pfSense FRR package (pfSense-pkg-frr) 2.0.2_1 and source revision 2.1.2_1 contain an OS command injection vulnerability in the FRR status filter. An authenticated WebGUI user with only the page-status-frr privilege can supply a filter value that breaks out of a single-quoted sed expression into which escapeshellarg() output is concatenated. Shell command substitution is then evaluated by a popen() pipeline, allowing attacker-selected commands to execute as root. There are updated FRR packages for pfSense Plus 26.07/26.03.1 and CE 2.9.0/2.8.1. |
| Nodemailer 3.0.0 before 10.0.13 has a regular expression denial of service in SMTPConnection._actionEHLO, whose four AUTH mechanism detection regexes contain overlapping whitespace sub-patterns that backtrack quadratically. A malicious or man-in-the-middle SMTP server can reply to EHLO with 250-AUTH, a long whitespace run and a non-matching token, blocking the Node.js event loop for tens of seconds to hours before authentication. |
