| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Integer Overflow, Improper Validation of Array Index, Uncontrolled Recursion and Memory Allocation with Excessive Size Value in the Go implementation of Apache PLC4X (PLC4Go) allow a malicious device, or an attacker able to inject network traffic, to crash or exhaust the memory of the client application,
causing a denial of service.
The individual defects are:
- Generated parsers pre-allocate arrays with the element count claimed on the wire (0.13.0 through 0.13.1).
- Transport read helpers allocate buffers of the size claimed on the wire without an upper bound.
- ADS and KNXnet/IP response handling indexes into received data without checking its length, causing a panic.
- ADS and EIP frame-length handling accepts, or arithmetically wraps to, a length of zero, breaking message framing.
- Recursive protocol types are parsed without a nesting-depth limit. The same defect in the Java implementation is covered by CVE-2026-102509 https://cveprocess.apache.org/cve5/CVE-2026-102509 .
Additionally, length and position arithmetic in generated serializers was performed in 16-bit integers. If an application forwards attacker-influenced payloads larger than 8 KB, the length field wraps, and the remainder of the payload may be interpreted by the receiving device (for example, an ADS PLC) as
additional, independent protocol messages.
This issue affects Apache PLC4X: from 0.11.0 before 1.0.0. PLC4Go is consumed as the Go module github.com/apache/plc4x/plc4go; versions refer to the corresponding Apache PLC4X releases.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. |
| Memory Allocation with Excessive Size Value, Allocation of Resources Without Limits, and Uncontrolled Recursion in the Java implementation of Apache PLC4X (PLC4J) allow a malicious or impersonated device to exhaust the memory or stack of the client application, causing a denial of service.
In the OPC UA driver these defects are reachable before authentication: the offending data is parsed while the secure channel and session are being established, before the server's identity has been bound to it. Configuring a trusted server therefore does not prevent exploitation by an attacker who can
impersonate it.
The individual defects are:
- Length-prefixed byte strings are allocated at the size claimed on the wire before the length is checked against the data actually received (0.10.0 through 0.13.1).
- Array fields in generated protocol parsers pre-allocate a list with the element count claimed on the wire, allowing a single count field to trigger a multi-gigabyte allocation. This parser is shared by all PLC4J drivers; the OPC UA driver is the verified pre-authentication path (0.10.0 through 0.13.1).
- The OPC UA driver accumulates message chunks without enforcing the negotiated maximum chunk count and message size (0.12.0 through 0.13.1).
- The OPC UA driver pre-allocates collections using element counts received from the server (0.10.0 through 0.13.1).
- Recursive protocol types are parsed without a nesting-depth limit. The same defect in the Go implementation is covered by CVE-2026-102510 https://cveprocess.apache.org/cve5/CVE-2026-102510 .
This issue affects Apache PLC4X: from 0.10.0 before 1.0.0.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. |
| Buffer Overflow vulnerability in UTT nv518G nv518GV3v3.2.7-210919-161313 allows a remote attacker to cause a denial of service via the gohead/sub_447CAC component |
| An unauthenticated command injection vulnerability in the /goform/fast_setting_internet_set endpoint of Tenda AC18 v15.03.05.05 allows attackers to execute arbitrary commands via a crafted payload injected into the mac parameter. |
| Cross-Site Request Forgery (CSRF) vulnerability in Metagauss ProfileGrid profilegrid-user-profiles-groups-and-communities allows Cross Site Request Forgery.This issue affects ProfileGrid: from n/a through 6.0.0.2. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject a command chain that carries no commands
A chain whose command_count is zero passes the payload length check,
because struct_size(payload, data, 0) is just the header. The fill loop
then does not run, so offset stays zero and the request is submitted with
a zero-length buffer.
On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since
op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers
MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers
MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission
continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte
before the buffer and faults on the vmap guard page. EXEC_CMD is
reachable by any process that can open the render node.
Reject the request instead. |
| Improper Validation of Unsafe Equivalence in Input vulnerability in Liquid Web / StellarWP GiveWP allows Authentication Bypass.
This issue affects GiveWP: from n/a through 4.16.9. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect
l2cap_chan_connect() tries to ensure there are no more than
L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the
same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs.
However, the check only counts deferred channels. If 6 L2CAP sockets
are connected at the same time in order DDDDND (D=deferred,
N=non-deferred), the last can bump the total to max+1. It results to
one __le16 written out of bounds of the scid array, and an invalid
ECRED_CONN_REQ being sent.
Fix by leaving room for the non-deferred pending ECRED channels in the
counting in l2cap_chan_connect(), so the limit can't be exceeded.
Move counting under same critical section where the channel is added.
Although race conditions involving this appear unreachable, it's easier
to see.
Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this
less brittle. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in StylemixThemes Motors motors-car-dealership-classified-listings allows Blind SQL Injection.This issue affects Motors: from n/a through 1.4.109. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use the DMA API for resource backing on Xen
On a Xen PV domain page addresses bear no relation to the real machine
addresses the host would have to use to reach it.
virtio_ring.c handles this correctly, vring_use_map_api() returns true
for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM.
virtio-gpu makes the same decision independently, but its copy
looks only at the feature bit:
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
QEMU does not set iommu_platform on virtio-vga by default, so
VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and
virtio_gpu_object_shmem_init() describes the framebuffer's backing pages
to the host with sg_phys(). Those are guest-physical addresses. In a PV
domain they resolve, on the host side, to pages belonging to some other
domain, so the host scans out unrelated memory.
Move the decision into virtio_gpu_use_dma_api() and give it the
xen_domain() check, like vring_use_map_api() has. This
additionally enables the dma_sync_sgtable_for_device() calls in
virtgpu_vq.c, which are required for correctness whenever swiotlb
is in play.
Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with
virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0
works fine and doesn't need this fix because it is identity-mapped,
only PV dom0s are affected. |
| Vulnerability in Citrix NetScaler ADC and Citrix NetScaler Gateway.
This issue affects ADC: before 14.1-73.37, before 13.1-64.23, before 14.1-73.37 FIPS, and before 13.1.37.279 FIPS and NDcPP; Gateway: before 14.1-73.37 and before 13.1-64.23 leading to a feature policy bypass due to improper HTTP URL based expression usage. |
| A malicious actor with access to the network and low privileges could exploit a series of authenticated SQL Injection vulnerabilities found in UniFi Talk Application to escalate privileges on the host device. |
| A malicious actor with access to the network could exploit a Server-Side Request Forgery (SSRF) vulnerability found in UniFi Talk Application to execute a Denial of Service (DoS) attack and bypass authentication in certain UniFi Talk API endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix listener task lifetime on netdev events
The listener thread exits when its listening socket is shutdown. The
netdevice notifier shuts down the socket before calling kthread_stop(), so
the task_struct can be freed before kthread_stop() gets its reference.
Create the listener in a stopped state and hold an extra task_struct
reference until kthread_stop_put() completes. Also stop and release
listeners before freeing their interface records during TCP teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: propagate DACL parsing errors
parse_dacl() silently accepts truncated ACEs and allocation failures,
allowing set_info_sec() to continue with an incomplete ACL conversion.
Return parsing and allocation errors to parse_sec_desc() so malformed
security descriptors are rejected before inode attributes or ACL xattrs
are updated. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix potential UAF/KASAN warning
Currently, trace_cachefiles_coherency() is being passed a pointer to a
__be64 lain over the coherency data in struct cachefiles_xattr so that it
can display the first 8 bytes. However, the data is of variable length and
could even be 0 bytes. This could lead to a UAF or KASAN warning.
Fix this by making sure the buffer has room for at least 8 bytes and that
those 8 bytes are pre-cleared.
Further, those bytes are not 8-byte aligned, so fix the tracepoint to
extract the data as four 2-byte words (they are 2-byte aligned) and
reassemble the __be64. The compiler will convert this into a single 8-byte
load where the CPU supports it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix dma mapping leak in stmmac_tso_xmit()
In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the
frame is dropped but the DMA mappings already created for the linear
part and for the fragments mapped before the failure are never
unmapped, leaking DMA mappings.
Fix the leak by walking back over the descriptors used by the frame and
releasing each of them with stmmac_free_tx_buffer(). Moreover, release
the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject invalid sectors_per_cluster in the boot sector
is_boot_sector_ntfs() checks the boot sector's sectors_per_cluster field
with a range test that rejects 0x81..0xf3 but accepts 0 and other
non-power-of-two counts. A zero value reaches parse_ntfs_boot_sector():
sectors_per_cluster_bits = ffs(sectors_per_cluster) - 1;
...
vol->cluster_size = vol->sector_size << sectors_per_cluster_bits;
ffs(0) is 0, so sectors_per_cluster_bits becomes (unsigned)-1 and the
shift is undefined:
UBSAN: shift-out-of-bounds in fs/ntfs/super.c:673:39
shift exponent 4294967295 is too large for 32-bit type 'int'
This change rejects any non-power-of-two value, since it feeds the
aforementioned shift via ffs() - 1, which only yields the correct shift for a
power of two. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init()
padapter->HalData is allocated via vzalloc(), but incorrectly freed
using kfree() in the rtw_sdio_if1_init() error path. Using kfree() to
release this vmalloc-backed buffer can lead to memory corruption.
Use rtw_hal_data_deinit() to pair the free correctly and free
HalData with vfree().
The bug was first flagged by an experimental static analysis tool we
are developing for kernel memory-management bugs. Manual inspection
confirms that the issue is still present in current mainline.
An x86_64 allyesconfig build showed no new warnings. As we do not have
suitable RTL8723BS SDIO hardware to test with, no runtime testing was
able to be performed. |
| An authentication bypass vulnerability in the firmware update endpoint of Hitachi Energy RTU500 end-of-life versions allows an unauthenticated attacker to upload arbitrary firmware through a crafted POST request. Successful exploitation could allow the attacker to modify device functionality or compromise the integrity or availability of the device. |
