| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU
Since commit 8e4f0b1ebcf2 ("bpf: use rcu_read_lock_dont_migrate() for
trampoline.c"), the BPF prolog (__bpf_prog_enter) calls migrate_disable()
only when CONFIG_PREEMPT_RCU is enabled, via rcu_read_lock_dont_migrate().
Without CONFIG_PREEMPT_RCU, the prolog never touches migration_disabled,
so migration_disabled == 1 always means the task is truly
migration-disabled regardless of whether it is the current task.
The old unconditional p == current check was a false negative in this
case, potentially allowing a migration-disabled task to be dispatched to
a remote CPU and triggering scx_error in task_can_run_on_remote_rq().
Only apply the p == current disambiguation when CONFIG_PREEMPT_RCU is
enabled, where the ambiguity with the BPF prolog still exists. |
| In the Linux kernel, the following vulnerability has been resolved:
EFI/CPER: don't go past the ARM processor CPER record buffer
There's a logic inside GHES/CPER to detect if the section_length
is too small, but it doesn't detect if it is too big.
Currently, if the firmware receives an ARM processor CPER record
stating that a section length is big, kernel will blindly trust
section_length, producing a very long dump. For instance, a 67
bytes record with ERR_INFO_NUM set 46198 and section length
set to 854918320 would dump a lot of data going a way past the
firmware memory-mapped area.
Fix it by adding a logic to prevent it to go past the buffer
if ERR_INFO_NUM is too big, making it report instead:
[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[Hardware Error]: event severity: recoverable
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: ARM processor error
[Hardware Error]: MIDR: 0xff304b2f8476870a
[Hardware Error]: section length: 854918320, CPER size: 67
[Hardware Error]: section length is too big
[Hardware Error]: firmware-generated error record is incorrect
[Hardware Error]: ERR_INFO_NUM is 46198
[ rjw: Subject and changelog tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-mdp: Fix a reference leak bug in mtk_mdp_remove()
In mtk_mdp_probe(), vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put()
to prevent reference leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: supply snapshot context in ceph_zero_partial_object()
The ceph_zero_partial_object function was missing proper snapshot
context for its OSD write operations, which could lead to data
inconsistencies in snapshots.
Reproducer:
../src/vstart.sh --new -x --localhost --bluestore
./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a'
mount -t ceph fs_a@.a=/ /mnt/mycephfs/ -o conf=./ceph.conf
dd if=/dev/urandom of=/mnt/mycephfs/foo bs=64K count=1
mkdir /mnt/mycephfs/.snap/snap1
md5sum /mnt/mycephfs/.snap/snap1/foo
fallocate -p -o 0 -l 4096 /mnt/mycephfs/foo
echo 3 > /proc/sys/vm/drop/caches
md5sum /mnt/mycephfs/.snap/snap1/foo # get different md5sum!! |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ionic: Fix potential NULL pointer dereference in ionic_query_port
The function ionic_query_port() calls ib_device_get_netdev() without
checking the return value which could lead to NULL pointer dereference,
Fix it by checking the return value and return -ENODEV if the 'ndev' is
NULL. |
| Starlet versions through 0.31 for Perl allows HTTP Request Smuggling via Improper Header Precedence.
Starlet incorrectly prioritizes "Content-Length" over "Transfer-Encoding: chunked" when both headers are present in an HTTP request. Per RFC 7230 3.3.3, Transfer-Encoding must take precedence.
An attacker could exploit this to smuggle malicious HTTP requests via a front-end reverse proxy. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix stale direct dispatch state in ddsp_dsq_id
@p->scx.ddsp_dsq_id can be left set (non-SCX_DSQ_INVALID) triggering a
spurious warning in mark_direct_dispatch() when the next wakeup's
ops.select_cpu() calls scx_bpf_dsq_insert(), such as:
WARNING: kernel/sched/ext.c:1273 at scx_dsq_insert_commit+0xcd/0x140
The root cause is that ddsp_dsq_id was only cleared in dispatch_enqueue(),
which is not reached in all paths that consume or cancel a direct dispatch
verdict.
Fix it by clearing it at the right places:
- direct_dispatch(): cache the direct dispatch state in local variables
and clear it before dispatch_enqueue() on the synchronous path. For
the deferred path, the direct dispatch state must remain set until
process_ddsp_deferred_locals() consumes them.
- process_ddsp_deferred_locals(): cache the dispatch state in local
variables and clear it before calling dispatch_to_local_dsq(), which
may migrate the task to another rq.
- do_enqueue_task(): clear the dispatch state on the enqueue path
(local/global/bypass fallbacks), where the direct dispatch verdict is
ignored.
- dequeue_task_scx(): clear the dispatch state after dispatch_dequeue()
to handle both the deferred dispatch cancellation and the holding_cpu
race, covering all cases where a pending direct dispatch is
cancelled.
- scx_disable_task(): clear the direct dispatch state when
transitioning a task out of the current scheduler. Waking tasks may
have had the direct dispatch state set by the outgoing scheduler's
ops.select_cpu() and then been queued on a wake_list via
ttwu_queue_wakelist(), when SCX_OPS_ALLOW_QUEUED_WAKEUP is set. Such
tasks are not on the runqueue and are not iterated by scx_bypass(),
so their direct dispatch state won't be cleared. Without this clear,
any subsequent SCX scheduler that tries to direct dispatch the task
will trigger the WARN_ON_ONCE() in mark_direct_dispatch(). |
| HHCL BigFix Service Management (SM) is affected by a Cross‑Site Request Forgery (CSRF) vulnerability. This could lead to unauthorized changes or exposure of sensitive data. |
| HCL BigFix Service Management (SM) application fails to strip EXIF metadata from uploaded images. This could lead to confidentiality and privacy risks if sensitive location information is unintentionally shared. . |
| HCL BigFix Service Management (SM) is affected by an Information Disclosure – Server Banner issue was identified. Exposed server banners may reveal software versions and system details, potentially aiding attackers in targeting known vulnerabilities. |
| HCL BigFix Service Management (SM) is vulnerable to insufficiently protected credentials for a short duration while communicating with a backend, internal application which could allow an attacker to potentially misuse them, if exfiltrated. . |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: set platform driver data
Add missing platform_set_drvdata() as the data will be used in remove(). |
| ChestnutCMS v1.5.10 has a SQL injection vulnerability. The content parameter of the cms_content tag can be manipulated in the admin backend and injected into a SQL query when the template is rendered. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: fix NULL pointer dereference during unbind race
Commit b81ac4395bbe ("usb: gadget: uvc: allow for application to cleanly
shutdown") introduced two stages of synchronization waits totaling 1500ms
in uvc_function_unbind() to prevent several types of kernel panics.
However, this timing-based approach is insufficient during power
management (PM) transitions.
When the PM subsystem starts freezing user space processes, the
wait_event_interruptible_timeout() is aborted early, which allows the
unbind thread to proceed and nullify the gadget pointer
(cdev->gadget = NULL):
[ 814.123447][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind()
[ 814.178583][ T3173] PM: suspend entry (deep)
[ 814.192487][ T3173] Freezing user space processes
[ 814.197668][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind no clean disconnect, wait for release
When the PM subsystem resumes or aborts the suspend and tasks are
restarted, the V4L2 release path is executed and attempts to access the
already nullified gadget pointer, triggering a kernel panic:
[ 814.292597][ C0] PM: pm_system_irq_wakeup: 479 triggered dhdpcie_host_wake
[ 814.386727][ T3173] Restarting tasks ...
[ 814.403522][ T4558] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
[ 814.404021][ T4558] pc : usb_gadget_deactivate+0x14/0xf4
[ 814.404031][ T4558] lr : usb_function_deactivate+0x54/0x94
[ 814.404078][ T4558] Call trace:
[ 814.404080][ T4558] usb_gadget_deactivate+0x14/0xf4
[ 814.404083][ T4558] usb_function_deactivate+0x54/0x94
[ 814.404087][ T4558] uvc_function_disconnect+0x1c/0x5c
[ 814.404092][ T4558] uvc_v4l2_release+0x44/0xac
[ 814.404095][ T4558] v4l2_release+0xcc/0x130
Address the race condition and NULL pointer dereference by:
1. State Synchronization (flag + mutex)
Introduce a 'func_unbound' flag in struct uvc_device. This allows
uvc_function_disconnect() to safely skip accessing the nullified
cdev->gadget pointer. As suggested by Alan Stern, this flag is protected
by a new mutex (uvc->lock) to ensure proper memory ordering and prevent
instruction reordering or speculative loads. This mutex is also used to
protect 'func_connected' for consistent state management.
2. Explicit Synchronization (completion)
Use a completion to synchronize uvc_function_unbind() with the
uvc_vdev_release() callback. This prevents Use-After-Free (UAF) by
ensuring struct uvc_device is freed after all video device resources
are released. |
| HCL BigFix Service Management (SM) does not adequately sanitize or safely render spreadsheet files (CSV, XLS, XLSX) before processing or distributing them. An attacker could populate data fields which, when saved to a CSV file, may attempt information exfiltration or other malicious activity when automatically executed by the spreadsheet software. Note that current versions of Excel warn users of untrusted content. |
| HCL BigFix Service Management (SM) is affected by a security misconfiguration due to a missing or insecure “X-Content-Type-Options” header. This could allow browsers to perform MIME-type sniffing, potentially causing malicious content to be interpreted and executed incorrectly. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_ether: Fix NULL pointer deref in eth_get_drvinfo
Commit ec35c1969650 ("usb: gadget: f_ncm: Fix net_device lifecycle with
device_move") reparents the gadget device to /sys/devices/virtual during
unbind, clearing the gadget pointer. If the userspace tool queries on
the surviving interface during this detached window, this leads to a
NULL pointer dereference.
Unable to handle kernel NULL pointer dereference
Call trace:
eth_get_drvinfo+0x50/0x90
ethtool_get_drvinfo+0x5c/0x1f0
__dev_ethtool+0xaec/0x1fe0
dev_ethtool+0x134/0x2e0
dev_ioctl+0x338/0x560
Add a NULL check for dev->gadget in eth_get_drvinfo(). When detached,
skip copying the fw_version and bus_info strings, which is natively
handled by ethtool_get_drvinfo for empty strings. |
| Memory safety bugs present in Firefox 149 and Thunderbird 149. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150 and Thunderbird 150. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop
A race condition between gether_disconnect() and eth_stop() leads to a
NULL pointer dereference. Specifically, if eth_stop() is triggered
concurrently while gether_disconnect() is tearing down the endpoints,
eth_stop() attempts to access the cleared endpoint descriptor, causing
the following NPE:
Unable to handle kernel NULL pointer dereference
Call trace:
__dwc3_gadget_ep_enable+0x60/0x788
dwc3_gadget_ep_enable+0x70/0xe4
usb_ep_enable+0x60/0x15c
eth_stop+0xb8/0x108
Because eth_stop() crashes while holding the dev->lock, the thread
running gether_disconnect() fails to acquire the same lock and spins
forever, resulting in a hardlockup:
Core - Debugging Information for Hardlockup core(7)
Call trace:
queued_spin_lock_slowpath+0x94/0x488
_raw_spin_lock+0x64/0x6c
gether_disconnect+0x19c/0x1e8
ncm_set_alt+0x68/0x1a0
composite_setup+0x6a0/0xc50
The root cause is that the clearing of dev->port_usb in
gether_disconnect() is delayed until the end of the function.
Move the clearing of dev->port_usb to the very beginning of
gether_disconnect() while holding dev->lock. This cuts off the link
immediately, ensuring eth_stop() will see dev->port_usb as NULL and
safely bail out. |
| An OS command injection vulnerability in the dnsmasq module of TP-Link Archer AX53 v1.0 allows an authenticated adjacent attacker to execute arbitrary code when a specially crafted configuration file is processed due to insufficient input validation. Successful exploitation may allow the attacker to modify device configuration, access sensitive information, or further compromise system integrity.
This issue affects AX53 v1.0: before 1.7.1 Build 20260213. |
