| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to subvert GPU HW to write to arbitrary physical memory pages.
Under certain circumstances this exploit could be used to corrupt data pages not allocated by the GPU driver but memory pages in use by the kernel and drivers running on the platform altering their behaviour. |
| A vulnerability was found in Intelbras VIP S3020 G2, VIP S4020 G2, VIP S4020 G3 and VIP S4320 G2 up to 20241222 and classified as problematic. Affected by this issue is some unknown functionality of the file /web_caps/webCapsConfig of the component Web Interface. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor assesses that "the information disclosed in the URL is not sensitive or poses any risk to the user". |
| RabbitMQ is a feature rich, multi-protocol messaging and streaming broker. In affected versions queue deletion via the HTTP API was not verifying the `configure` permission of the user. Users who had all of the following: 1. Valid credentials, 2. Some permissions for the target virtual host & 3. HTTP API access. could delete queues it had no (deletion) permissions for. This issue has been addressed in version 3.12.11 of the open source rabbitMQ release and in versions 1.5.2, 3.13.0, and 4.0.0 of the tanzu release. Users are advised to upgrade. Users unable to upgrade may disable management plugin and use, for example, Prometheus and Grafana for monitoring. |
| An issue in the permission verification module and organization/application editing interface in Casdoor v2.26.0 and before, and fixed in v.2.63.0, allows remote authenticated administrators of any organization within the system to bypass the system's permission verification mechanism by directly concatenating URLs after login |
| https://www.gnu.org/software/binutils/ nm >=2.43 is affected by: Incorrect Access Control. The type of exploitation is: local. The component is: `nm --without-symbol-version` function. |
| A security flaw has been discovered in Papermerge DMS up to 3.5.3. This issue affects some unknown processing of the component Authorization Token Handler. Performing manipulation results in improper authorization. The attack can be initiated remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Yonyou U8 Cloud up to 5.1sp. The impacted element is an unknown function of the file /service/NCloudGatewayServlet of the component Request Header Handler. Such manipulation of the argument ts/sign leads to unrestricted upload. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in roncoo roncoo-pay up to 9428382af21cd5568319eae7429b7e1d0332ff40. The impacted element is an unknown function of the file /user/info/list. Performing manipulation results in improper authentication. It is possible to initiate the attack remotely. The exploit has been made public and could be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability, which was classified as problematic, has been found in Eastnets PaymentSafe 2.5.26.0. Affected by this issue is some unknown functionality of the file /Default.aspx of the component URL Handler. The manipulation leads to improper authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.5.27.0 is able to address this issue. |
| Wazuh is a security detection, visibility, and compliance open source project. From version 4.9.0 to before 4.13.0, the Wazuh API – Agent Configuration in certain configurations allows authenticated users with read-only API roles to retrieve agent enrollment credentials through the /utils/configuration endpoint. These credentials can be used to register new agents within the same Wazuh tenant without requiring elevated permissions through the UI. This issue has been patched in version 4.13.0. |
| A "Privilege boundary violation" vulnerability is identified affecting multiple Radiometer Products. Exploitation of this vulnerability gives a user with physical access to the analyzer, the possibility to gain unauthorized access to functionalities outside the restricted environment. The vulnerability is due to weakness in the design of access control implementation in application software.
Other related CVE's are CVE-2025-14096 & CVE-2025-14097.
Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required configuration for Exposure:
Physical access to the analyzer is needed.
Temporary work Around:
Only authorized people can physically access the analyzer.
Permanent solution:
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept. Radiometer is not aware of any publicly available exploit at the time of publication. Note:
CVSS score 6.8 when underlying OS is Windows 7 or Windows XP Operating systems and CVSS score 5.7 when underlying OS is Windows 8 or Windows 10 operating systems. |
| A vulnerability in the management interface access control list (ACL) processing feature in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass configured ACLs for the SSH, NetConf, and gRPC features.
This vulnerability exists because management interface ACLs have not been supported on Cisco IOS XR Software Packet I/O infrastructure platforms for Linux-handled features such as SSH, NetConf, or gRPC. An attacker could exploit this vulnerability by attempting to send traffic to an affected device. A successful exploit could allow the attacker to bypass an ingress ACL that is applied on the management interface of the affected device. |
| A vulnerability was found in rowboatlabs rowboat up to 8096eaf63b5a0732edd8f812bee05b78e214ee97. It has been rated as critical. Affected by this issue is the function PUT of the file apps/rowboat/app/api/uploads/[fileId]/route.ts of the component Session Handler. The manipulation of the argument params leads to missing authentication. The attack may be launched remotely. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. It is expected that this issue will be fixed in the near future. |
| A vulnerability was found in Projeqtor up to 12.0.2. It has been rated as critical. Affected by this issue is some unknown functionality of the file /tool/saveAttachment.php. The manipulation of the argument attachmentFiles leads to unrestricted upload. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 12.0.3 is able to address this issue. It is recommended to upgrade the affected component. The vendor explains, that "this vulnerability can be exploited only on not securely installed instances, as it is adviced during product install: attachment directory should be out of web reach, so that even if executable file can be uploaded, it cannot be executed through the web." |
| A vulnerability exists in Intelbras CFTV IP NVD 9032 R Ftd V2.800.00IB00C.0.T, which allows an unauthenticated attacker to bypass the multi-factor authentication (MFA) mechanism during the password recovery process. This results in the ability to change the admin password and gain full access to the administrative panel. |
| A vulnerability in the application software of multiple Radiometer products may allow remote code execution and unauthorized device management when specific internal conditions are met. Exploitation requires that a remote connection is established with additional information obtained through other means. The issue is caused by a weakness in the analyzer’s application software. Other related CVE's are CVE-2025-14095 & CVE-2025-14096. Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required Configuration for Exposure: Affected application software version is in use and remote support feature is enabled in the analyzer. Temporary work Around: If the network is not considered secure, please remove the analyzer from the network. Permanent solution:
Customers should ensure the following:
• The network is secure, and access follows best practices.
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept (PoC). Radiometer is not aware of any publicly available exploits at the time of this publication. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| Files is a module for managing files inside spaces and user profiles. Prior to versions 0.16.11 and 0.17.2, insufficient authorization checks allow non-member users to create new folders, up- and download files as a ZIP archive in public spaces. Private spaces are not affected. This issue has been patched in versions 0.16.11 and 0.17.2. |
| Ory Kratos is an identity, user management and authentication system for cloud services. Prior to version 1.3.0, given a number of preconditions, the `highest_available` setting will incorrectly assume that the identity’s highest available AAL is `aal1` even though it really is `aal2`. This means that the `highest_available` configuration will act as if the user has only one factor set up, for that particular user. This means that they can call the settings and whoami endpoint without a `aal2` session, even though that should be disallowed. An attacker would need to steal or guess a valid login OTP of a user who has only OTP for login enabled and who has an incorrect `available_aal` value stored, to exploit this vulnerability. All other aspects of the session (e.g. the session’s aal) are not impacted by this issue. On the Ory Network, only 0.00066% of registered users were affected by this issue, and most of those users appeared to be test users. Their respective AAL values have since been updated and they are no longer vulnerable to this attack. Version 1.3.0 is not affected by this issue. As a workaround, those who require MFA should disable the passwordless code login method. If that is not possible, check the sessions `aal` to identify if the user has `aal1` or `aal2`. |
| Nix is a package manager for Linux and other Unix systems. Starting in version 1.11 and prior to versions 2.18.8 and 2.24.8, `<nix/fetchurl.nix>` did not verify TLS certificates on HTTPS connections. This could lead to connection details such as full URLs or credentials leaking in case of a man-in-the-middle (MITM) attack. `<nix/fetchurl.nix>` is also known as the builtin derivation builder `builtin:fetchurl`. It's not to be confused with the evaluation-time function `builtins.fetchurl`, which was not affected by this issue. A user may be affected by the risk of leaking credentials if they have a `netrc` file for authentication, or rely on derivations with `impureEnvVars` set to use credentials from the environment. In addition, the commonplace trust-on-first-use (TOFU) technique of updating dependencies by specifying an invalid hash and obtaining it from a remote store was also vulnerable to a MITM injecting arbitrary store objects. This also applied to the impure derivations experimental feature. Note that this may also happen when using Nixpkgs fetchers to obtain new hashes when not using the fake hash method, although that mechanism is not implemented in Nix itself but rather in Nixpkgs using a fixed-output derivation. The behavior was introduced in version 1.11 to make it consistent with the Nixpkgs `pkgs.fetchurl` and to make `<nix/fetchurl.nix>` work in the derivation builder sandbox, which back then did not have access to the CA bundles by default. Nowadays, CA bundles are bind-mounted on Linux. This issue has been fixed in Nix 2.18.8 and 2.24.8. As a workaround, implement (authenticated) fetching with `pkgs.fetchurl` from Nixpkgs, using `impureEnvVars` and `curlOpts` as needed. |
