| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject redirect helpers without a bpf_net_context
The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task
bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the
current->bpf_net_context unconditionally. That context is established
on the paths that run tc BPF such as sch_handle_{ingress,egress}(),
*except* for the case where {cls,act}_bpf was attached to a proper
qdisc. A program running from there reaches the NULL deref in two ways:
* It calls bpf_redirect() directly, which dereferences the context at
the top of the helper:
tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \
avpkt 1000 burst 100 qevent early_drop block 10
tc filter add block 10 pref 1 bpf obj redirect.o
* It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle()
then dispatches to skb_do_redirect(), which dereferences the context
Rather than extending bpf_net_context management into the qdisc path,
make the redirect helpers refuse to operate when no context exists, and
have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of
calling skb_do_redirect(). Previous behaviour was a crash, so nothing
regresses by not supporting it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: validate Realtek vendor event length
btusb_recv_event_realtek() reads the event code at data[0] and the Realtek
subevent code at data[2] before deciding whether to consume a vendor event
as a coredump.
For example, the two-byte event ff 00 contains a complete vendor-event
header declaring zero parameters. The old classifier still reads a
nonexistent third byte and can misclassify the event as a coredump if the
adjacent byte is 0x34.
Require the HCI event header and first parameter to be present before
inspecting the Realtek subevent code. Short events continue through the
normal HCI receive path, which owns their protocol validation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: fix OOB read from firmware IE lengths in connect event
The firmware-controlled beacon_ie_len, assoc_req_len, and assoc_resp_len
fields in ath6kl_wmi_connect_event_rx() are not validated against the
buffer length. Their sum (up to 765) can exceed the actual WMI event
data, causing out-of-bounds reads during IE parsing and state corruption
of wmi->is_wmm_enabled.
Add a check that the total IE length fits within the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: net: Fix fragmented datagram reassembly
fwnet_frag_new() keeps a sorted list of received fragments for a partial
datagram. When a new fragment is adjacent to an existing fragment, the
code checks whether the new fragment also closes the gap to the next or
previous list entry.
Those neighbor lookups currently assume that the current fragment always
has a real next or previous fragment. At a list edge, the next or
previous entry is the list head, not a struct fwnet_fragment_info.
The gap checks also compare against the old edge of the current fragment
instead of the edge after adding the new fragment. As a result, a
fragment that bridges two existing ranges may leave two adjacent ranges
unmerged, so fwnet_pd_is_complete() can miss a complete datagram.
Check for the list head before looking up the neighboring fragment, and
compare the neighbor against the new fragment's far edge when deciding
whether to merge all three ranges.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| The YMC Filter WordPress plugin before 3.12.8 does not sanitize and escape a layout builder setting before outputting it on a public endpoint, and does not verify object ownership when the setting is saved, allowing users with the Contributor role and above to store JavaScript that executes in the browser of any visitor viewing an affected filter. |
| The WP Directory Kit WordPress plugin before 1.5.5 does not perform authorization or nonce checks on one of its authenticated AJAX actions, allowing any authenticated user such as a Subscriber to disclose the WP Directory Kit WordPress plugin before 1.5.5 settings including sensitive API keys and secrets. |
| In the Linux kernel, the following vulnerability has been resolved:
arm_mpam: guard MBWU state before adding it to garbage
__destroy_component_cfg() adds each RIS mbwu_state object to the MPAM
garbage list when destroying component configuration.
However, mbwu_state is allocated per RIS and only for RISes with MBWU
monitors. A component can therefore have comp->cfg allocated while some
RISes still have ris->mbwu_state set to NULL.
Passing a NULL mbwu_state to add_to_garbage() dereferences the NULL
pointer inside the macro.
Skip RISes that do not have an mbwu_state object before adding them to
the garbage list. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: tas2781: bound firmware description string parsing
The TAS2781 firmware parser reads several variable-length description
strings with strlen() before checking that the string terminator is
present inside the firmware blob. A malformed firmware image without a
NUL terminator can therefore make the parser walk past the end of the
firmware buffer before the later size checks run.
Add a small bounded string-length helper and use it for all description
fields that are parsed from the firmware buffer. Keep the existing size
checks for the fixed bytes that follow each string. |
| Consul Community Edition and Consul Enterprise 1.18.21 through 2.0.2 are vulnerable to a partial arbitrary file read when configured to use the Vault Connect CA provider with JWT or AppRole authentication. A privileged attacker with `operator:write` permission may direct Consul to read and forward credential files outside the intended scope, potentially leading to the exfiltration of sensitive secrets from the Consul server host. This vulnerability, CVE-2026-19017, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| The WP Directory Kit WordPress plugin before 1.5.5 does not perform authorization or nonce checks on one of its authenticated AJAX actions, allowing any authenticated user such as a Subscriber to disclose the site's user list and unpublished listings belonging to other users. |
| The GeoDirectory WordPress plugin before 2.8.169 does not perform any authorization check when returning map marker data for a single requested listing, allowing unauthenticated users to disclose the title and exact geographic coordinates of non-public (pending or draft) listings. |
| The WP Data Access WordPress plugin before 5.5.79 does not validate the column names it accepts on one of its unauthenticated AJAX actions, and the nonce guarding that action does not cover them, allowing unauthenticated attackers to read arbitrary columns of the database table the affected front-end form is bound to, including user password hashes where that table is the users table. |
| The WP MAPS PRO WordPress plugin before 6.1.3 does not perform a capability check in one of its AJAX actions, which is also available to unauthenticated users, and does not properly validate a user-controlled path before using it in a file inclusion, allowing unauthenticated attackers to include and execute arbitrary existing local PHP files on the server. |
| The HT Contact Form WordPress plugin before 2.9.3 does not perform any authorization check on the endpoint that returns a saved form draft, allowing unauthenticated users to read the personal data (name, email, phone, address) stored in form drafts. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix devconf_all NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the devconf_all is
never initialized because inet6_init() exits before addrconf_init() is
called which initializes it. bond_send_validate(), however, will still
call bond_ns_send_all() even ipv6 is indeed disabled. It will lead to
NULL derefence of net->ipv6.devconf_all in ip6_pol_route().
BUG: kernel NULL pointer dereference, address: 000000000000000c
[...]
Workqueue: bond0 bond_arp_monitor [bonding]
RIP: 0010:ip6_pol_route+0x69/0x480
[...]
Call Trace:
<TASK>
? srso_return_thunk+0x5/0x5f
? __pfx_ip6_pol_route_output+0x10/0x10
fib6_rule_lookup+0xfe/0x260
? wakeup_preempt+0x8a/0x90
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? sched_balance_rq+0x369/0x810
ip6_route_output_flags+0xd7/0x170
bond_ns_send_all+0xde/0x280 [bonding]
bond_ab_arp_probe+0x296/0x320 [bonding]
? srso_return_thunk+0x5/0x5f
bond_activebackup_arp_mon+0xb4/0x2c0 [bonding]
process_one_work+0x196/0x370
worker_thread+0x1af/0x320
? srso_return_thunk+0x5/0x5f
? __pfx_worker_thread+0x10/0x10
kthread+0xe3/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x199/0x260
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fix this by adding ipv6_mod_enabled() condition check in the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: occ: validate poll response sensor blocks
The OCC poll response parser walks a counted list of sensor data blocks.
It used the static backing-array capacity as the parse boundary, but a
transport response makes only data_length bytes current and valid. A
truncated response can therefore make the parser consume a block header or
block extent outside the current response.
Use data_length as the parent boundary, prove the fixed poll header and
each current block header before reading them, and prove the complete block
before advancing. Keep parsed sensor metadata local until the complete
response has passed validation, then publish it. Propagate
malformed-response errors before publishing the OCC as active. |
| In the Linux kernel, the following vulnerability has been resolved:
wan: wanxl: Only reset hardware after BAR mapping
wanxl_pci_init_one() stores the freshly allocated card in driver data
before the PLX BAR is mapped. Several early probe failures then unwind
through wanxl_pci_remove_one(), including failure to allocate the coherent
status area or to restore the DMA mask.
wanxl_pci_remove_one() unconditionally calls wanxl_reset(), and
wanxl_reset() dereferences card->plx. On those early failures card->plx
is still NULL, so the error path can dereference a NULL MMIO pointer.
Only issue the hardware reset once the BAR mapping exists. The remaining
cleanup in wanxl_pci_remove_one() already checks whether later resources
were allocated.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
nfp: Check resource mutex allocation
nfp_cpp_resource_find() allocates a CPP mutex handle for the matching
resource-table entry and then reports success. nfp_resource_try_acquire()
immediately passes that handle to nfp_cpp_mutex_trylock().
However, nfp_cpp_mutex_alloc() returns NULL on failure. If that happens
for a matching table entry, the resource lookup still returns success and
the following trylock dereferences a NULL mutex pointer while opening the
resource.
nfp_resource_acquire() already treats failure to allocate the table mutex
as -ENOMEM. Do the same for the resource mutex and fail the lookup before
publishing the rest of the resource handle.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix DMA direction for NPU mailbox buffer
airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE,
but some callers expect the NPU to write response data back into the
same buffer:
- airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into
the buffer, then the caller reads it via memcpy()
- airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back
npu_stats_addr field in the response
On non-cache-coherent architectures like EN7581 (Cortex-A53 without
hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op
— it does not invalidate the CPU cache. If the NPU-written cache line
is still present in the CPU cache when the caller reads the buffer,
the CPU observes stale data instead of the NPU response.
This is a timing-sensitive bug: small mailbox buffers (~24 bytes)
typically fit in a single cache line and may survive in the cache
until the caller reads them, producing silent data corruption rather
than a crash. The bug is more likely to trigger when the caller reads
the response immediately after dma_unmap_single() without intervening
cache-evicting operations.
Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures
dma_unmap_single() invalidates the CPU cache on non-coherent systems.
The mailbox buffers are small so there is no performance concern. |
| Missing Authentication in Apache Ranger Download APIs on versions <= 2.8.0.
Users are recommended to upgrade to version 2.9.0, which fixes this issue. |
