| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability classified as critical has been found in FNKvision FNK-GU2 up to 40.1.7. Affected is an unknown function of the component UART Interface. The manipulation leads to on-chip debug and test interface with improper access control. It is possible to launch the attack on the physical device. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. |
| The Honeywell Experion PKS and OneWireless WDM contains a Memory Buffer vulnerability in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to an Overread Buffers, which could result in improper index validation against buffer borders leading to remote code execution.
Honeywell recommends updating to the most recent version of Honeywell Experion PKS:
520.2 TCU9 HF1 and 530.1 TCU3 HF1 and OneWireless: 322.5 and 331.1.
The affected Experion PKS products are C300 PCNT02, C300 PCNT05, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3.The OneWireless WDM affected versions are 322.1 through 322.4 and 330.1 through 330.3. |
| The exos 9300 application can be used to configure Access Managers (e.g. 92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps.
This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication:
- Re-configure Access Managers (e.g. remove alarming system requirements)
- Freely re-configure the inputs and outputs
- Open all connected doors permanently
- Open all doors for a defined time interval
- Change the admin password
- and many more
Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet. |
| A vulnerability, which was classified as problematic, has been found in joelittlejohn jsonschema2pojo 1.2.2. This issue affects the function apply of the file org/jsonschema2pojo/rules/SchemaRule.java of the component JSON File Handler. The manipulation leads to stack-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in H3C GR-3000AX V100R007L50. It has been classified as critical. Affected is the function UpdateWanParamsMulti/UpdateIpv6Params of the file /routing/goform/aspForm. The manipulation of the argument param leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor confirms the existence of this issue. Because they assess the risk as low, they do not have immediate plans for remediation. |
| A vulnerability classified as critical was found in uYanki board-stm32f103rc-berial up to 84daed541609cb7b46854cc6672a275d1007e295. This vulnerability affects the function heartrate1_i2c_hal_write of the file 7.Example/hal/i2c/max30100/Manual/demo2/2/heartrate1_hal.c. The manipulation of the argument num leads to stack-based buffer overflow. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. |
| pyLoad is a free and open-source download manager written in Python. In versions prior to 0.5.0b3.dev91, pyLoad web interface contained insufficient input validation in both the Captcha script endpoint and the Click'N'Load (CNL) Blueprint. This flaw allowed untrusted user input to be processed unsafely, which could be exploited by an attacker to inject arbitrary content into the web UI or manipulate request handling. The vulnerability could lead to client-side code execution (XSS) or other unintended behaviors when a malicious payload is submitted. user-supplied parameters from HTTP requests were not adequately validated or sanitized before being passed into the application logic and response generation. This allowed crafted input to alter the expected execution flow. CNL (Click'N'Load) blueprint exposed unsafe handling of untrusted parameters in HTTP requests. The application did not consistently enforce input validation or encoding, making it possible for an attacker to craft malicious requests. Version 0.5.0b3.dev91 contains a patch for the issue. |
| Ambiguous wording in the web interface of the ctrlX OS setup mechanism could lead the user to believe that the backup file is encrypted when a password is set. However, only the private key - if available in the backup - is encrypted, while the backup file itself remains unencrypted. |
| Incorrect boundary conditions in the Audio/Video component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. |
| Incorrect boundary conditions in the Graphics: Text component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. |
| Incorrect boundary conditions in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 149.0.2 and Thunderbird 149.0.2. |
| Improper Encoding or Escaping of Output vulnerability in the JsonAccessLogValve component of Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.20, from 10.1.0-M1 through 10.1.53, from 9.0.40 through 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117 , which fix the issue. |
| A buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking. Note that this occurs after certificate chain signature verification and requires either a CA to have signed a malicious certificate or for an application to continue certificate verification despite failure to construct a path to a trusted issuer. An attacker can craft a malicious email address in a certificate to overflow an arbitrary number of bytes containing the `.' character (decimal 46) on the stack. This buffer overflow could result in a crash (causing a denial of service). In a TLS client, this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the server requests client authentication and a malicious client connects.
|
| A buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking. Note that this occurs after certificate chain signature verification and requires either a CA to have signed the malicious certificate or for the application to continue certificate verification despite failure to construct a path to a trusted issuer. An attacker can craft a malicious email address to overflow four attacker-controlled bytes on the stack. This buffer overflow could result in a crash (causing a denial of service) or potentially remote code execution. Many platforms implement stack overflow protections which would mitigate against the risk of remote code execution. The risk may be further mitigated based on stack layout for any given platform/compiler. Pre-announcements of CVE-2022-3602 described this issue as CRITICAL. Further analysis based on some of the mitigating factors described above have led this to be downgraded to HIGH. Users are still encouraged to upgrade to a new version as soon as possible. In a TLS client, this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the server requests client authentication and a malicious client connects. Fixed in OpenSSL 3.0.7 (Affected 3.0.0,3.0.1,3.0.2,3.0.3,3.0.4,3.0.5,3.0.6). |
| A vulnerability was detected in D-Link DIR-645 1.01/1.02/1.03. Impacted is the function hedwigcgi_main of the file /cgi-bin/hedwig.cgi. The manipulation results in stack-based buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was detected in Totolink A800R 4.1.2cu.5137_B20200730. This impacts the function setAppEasyWizardConfig in the library /lib/cste_modules/app.so. The manipulation of the argument apcliSsid results in buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. |
| ewe is a Gleam web server. Prior to version 3.0.6, the encode_headers function in src/ewe/internal/encoder.gleam directly interpolates response header keys and values into raw HTTP bytes without validating or stripping CRLF (\r\n) sequences. An application that passes user-controlled data into response headers (e.g., setting a Location redirect header from a request parameter) allows an attacker to inject arbitrary HTTP response content, leading to response splitting, cache poisoning, and possible cross-site scripting. Notably, ewe does validate CRLF in incoming request headers via validate_field_value() in the HTTP/1.1 parser — but provides no equivalent protection for outgoing response headers in the encoder. This issue has been patched in version 3.0.6. |
| ChurchCRM is an open-source church management system. Prior to 7.1.0, a stored cross-site scripting vulnerability exists in PersonView.php due to incorrect use of sanitizeText() as an output sanitizer for HTML attribute context. The function only strips HTML tags, it does not escape quote characters allowing an attacker to break out of the href attribute and inject arbitrary JavaScript event handlers. Any authenticated user with the EditRecords role can store the payload in a person's Facebook field. The XSS fires against any user who views that person's profile page, including administrators, enabling session hijacking and full account takeover. This vulnerability is fixed in 7.1.0. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 38.8.6, 39.8.3, 40.8.3, and 41.0.3, apps that register custom protocol handlers via protocol.handle() / protocol.registerSchemesAsPrivileged() or modify response headers via webRequest.onHeadersReceived may be vulnerable to HTTP response header injection if attacker-controlled input is reflected into a response header name or value. An attacker who can influence a header value may be able to inject additional response headers, affecting cookies, content security policy, or cross-origin access controls. Apps that do not reflect external input into response headers are not affected. This issue has been patched in versions 38.8.6, 39.8.3, 40.8.3, and 41.0.3. |
| Budibase is an open-source low-code platform. Prior to version 3.33.4, a server-side request forgery (SSRF) vulnerability exists in Budibase's REST datasource connector. The platform's SSRF protection mechanism (IP blacklist) is rendered completely ineffective because the BLACKLIST_IPS environment variable is not set by default in any of the official deployment configurations. When this variable is empty, the blacklist function unconditionally returns false, allowing all requests through without restriction. This issue has been patched in version 3.33.4. |
