| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cassini: Fix a memory leak in the error handling path of cas_init_one()
cas_saturn_firmware_init() allocates some memory using vmalloc(). This
memory is freed in the .remove() function but not it the error handling
path of the probe.
Add the missing vfree() to avoid a memory leak, should an error occur. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_dsp_rproc: Add custom memory copy implementation for i.MX DSP Cores
The IRAM is part of the HiFi DSP.
According to hardware specification only 32-bits write are allowed
otherwise we get a Kernel panic.
Therefore add a custom memory copy and memset functions to deal with
the above restriction. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't check PageError in __extent_writepage
__extent_writepage currenly sets PageError whenever any error happens,
and the also checks for PageError to decide if to call error handling.
This leads to very unclear responsibility for cleaning up on errors.
In the VM and generic writeback helpers the basic idea is that once
I/O is fired off all error handling responsibility is delegated to the
end I/O handler. But if that end I/O handler sets the PageError bit,
and the submitter checks it, the bit could in some cases leak into the
submission context for fast enough I/O.
Fix this by simply not checking PageError and just using the local
ret variable to check for submission errors. This also fundamentally
solves the long problem documented in a comment in __extent_writepage
by never leaking the error bit into the submission context. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Add SRCU protection for reading PDPTRs in __get_sregs2()
Add SRCU read-side protection when reading PDPTR registers in
__get_sregs2().
Reading PDPTRs may trigger access to guest memory:
kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() ->
kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot()
kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(),
which uses srcu_dereference_check() and requires either kvm->srcu or
kvm->slots_lock to be held. Currently only vcpu->mutex is held,
triggering lockdep warning:
=============================
WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot
6.12.59+ #3 Not tainted
include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.5.1717/15100:
#0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824
__kvm_memslots include/linux/kvm_host.h:1062 [inline]
__kvm_memslots include/linux/kvm_host.h:1059 [inline]
kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline]
kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617
kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302
load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065
svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688
kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline]
__get_sregs2 arch/x86/kvm/x86.c:11784 [inline]
kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279
kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix locking usage for tcon fields
We used to use the cifs_tcp_ses_lock to protect a lot of objects
that are not just the server, ses or tcon lists. We later introduced
srv_lock, ses_lock and tc_lock to protect fields within the
corresponding structs. This was done to provide a more granular
protection and avoid unnecessary serialization.
There were still a couple of uses of cifs_tcp_ses_lock to provide
tcon fields. In this patch, I've replaced them with tc_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix use-after-free in pci_bus_release_domain_nr()
Commit c14f7ccc9f5d ("PCI: Assign PCI domain IDs by ida_alloc()")
introduced a use-after-free bug in the bus removal cleanup. The issue was
found with kfence:
[ 19.293351] BUG: KFENCE: use-after-free read in pci_bus_release_domain_nr+0x10/0x70
[ 19.302817] Use-after-free read at 0x000000007f3b80eb (in kfence-#115):
[ 19.309677] pci_bus_release_domain_nr+0x10/0x70
[ 19.309691] dw_pcie_host_deinit+0x28/0x78
[ 19.309702] tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194]
[ 19.309734] tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194]
[ 19.309752] platform_probe+0x90/0xd8
...
[ 19.311457] kfence-#115: 0x00000000063a155a-0x00000000ba698da8, size=1072, cache=kmalloc-2k
[ 19.311469] allocated by task 96 on cpu 10 at 19.279323s:
[ 19.311562] __kmem_cache_alloc_node+0x260/0x278
[ 19.311571] kmalloc_trace+0x24/0x30
[ 19.311580] pci_alloc_bus+0x24/0xa0
[ 19.311590] pci_register_host_bridge+0x48/0x4b8
[ 19.311601] pci_scan_root_bus_bridge+0xc0/0xe8
[ 19.311613] pci_host_probe+0x18/0xc0
[ 19.311623] dw_pcie_host_init+0x2c0/0x568
[ 19.311630] tegra_pcie_dw_probe+0x610/0xb28 [pcie_tegra194]
[ 19.311647] platform_probe+0x90/0xd8
...
[ 19.311782] freed by task 96 on cpu 10 at 19.285833s:
[ 19.311799] release_pcibus_dev+0x30/0x40
[ 19.311808] device_release+0x30/0x90
[ 19.311814] kobject_put+0xa8/0x120
[ 19.311832] device_unregister+0x20/0x30
[ 19.311839] pci_remove_bus+0x78/0x88
[ 19.311850] pci_remove_root_bus+0x5c/0x98
[ 19.311860] dw_pcie_host_deinit+0x28/0x78
[ 19.311866] tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194]
[ 19.311883] tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194]
[ 19.311900] platform_probe+0x90/0xd8
...
[ 19.313579] CPU: 10 PID: 96 Comm: kworker/u24:2 Not tainted 6.2.0 #4
[ 19.320171] Hardware name: /, BIOS 1.0-d7fb19b 08/10/2022
[ 19.325852] Workqueue: events_unbound deferred_probe_work_func
The stack trace is a bit misleading as dw_pcie_host_deinit() doesn't
directly call pci_bus_release_domain_nr(). The issue turns out to be in
pci_remove_root_bus() which first calls pci_remove_bus() which frees the
struct pci_bus when its struct device is released. Then
pci_bus_release_domain_nr() is called and accesses the freed struct
pci_bus. Reordering these fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix racy issue under cocurrent smb2 tree disconnect
There is UAF issue under cocurrent smb2 tree disconnect.
This patch introduce TREE_CONN_EXPIRE flags for tcon to avoid cocurrent
access. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/sme: Set new vector length before reallocating
As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.
Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.
For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline. |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: reject FS_IOC_ENABLE_VERITY on mode 3 fds
Commit 56124d6c87fd ("fsverity: support enabling with tree block size <
PAGE_SIZE") changed FS_IOC_ENABLE_VERITY to use __kernel_read() to read
the file's data, instead of direct pagecache accesses.
An unintended consequence of this is that the
'WARN_ON_ONCE(!(file->f_mode & FMODE_READ))' in __kernel_read() became
reachable by fuzz tests. This happens if FS_IOC_ENABLE_VERITY is called
on a fd opened with access mode 3, which means "ioctl access only".
Arguably, FS_IOC_ENABLE_VERITY should work on ioctl-only fds. But
ioctl-only fds are a weird Linux extension that is rarely used and that
few people even know about. (The documentation for FS_IOC_ENABLE_VERITY
even specifically says it requires O_RDONLY.) It's probably not
worthwhile to make the ioctl internally open a new fd just to handle
this case. Thus, just reject the ioctl on such fds for now. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate()
The subs function argument may be NULL, so do not use it before the NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: don't reissue in case of poll race on multishot request
A previous commit fixed a poll race that can occur, but it's only
applicable for multishot requests. For a multishot request, we can safely
ignore a spurious wakeup, as we never leave the waitqueue to begin with.
A blunt reissue of a multishot armed request can cause us to leak a
buffer, if they are ring provided. While this seems like a bug in itself,
it's not really defined behavior to reissue a multishot request directly.
It's less efficient to do so as well, and not required to rearm anything
like it is for singleshot poll requests. |
| In the Linux kernel, the following vulnerability has been resolved:
can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds
If the "struct can_priv::echoo_skb" is accessed out of bounds, this
would cause a kernel crash. Instead, issue a meaningful warning
message and return with an error. |
| In the Linux kernel, the following vulnerability has been resolved:
media: bttv: fix use after free error due to btv->timeout timer
There may be some a race condition between timer function
bttv_irq_timeout and bttv_remove. The timer is setup in
probe and there is no timer_delete operation in remove
function. When it hit kfree btv, the function might still be
invoked, which will cause use after free bug.
This bug is found by static analysis, it may be false positive.
Fix it by adding del_timer_sync invoking to the remove function.
cpu0 cpu1
bttv_probe
->timer_setup
->bttv_set_dma
->mod_timer;
bttv_remove
->kfree(btv);
->bttv_irq_timeout
->USE btv |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: perf: Do not broadcast to other cpus when starting a counter
This command:
$ perf record -e cycles:k -e instructions:k -c 10000 -m 64M dd if=/dev/zero of=/dev/null count=1000
gives rise to this kernel warning:
[ 444.364395] WARNING: CPU: 0 PID: 104 at kernel/smp.c:775 smp_call_function_many_cond+0x42c/0x436
[ 444.364515] Modules linked in:
[ 444.364657] CPU: 0 PID: 104 Comm: perf-exec Not tainted 6.6.0-rc6-00051-g391df82e8ec3-dirty #73
[ 444.364771] Hardware name: riscv-virtio,qemu (DT)
[ 444.364868] epc : smp_call_function_many_cond+0x42c/0x436
[ 444.364917] ra : on_each_cpu_cond_mask+0x20/0x32
[ 444.364948] epc : ffffffff8009f9e0 ra : ffffffff8009fa5a sp : ff20000000003800
[ 444.364966] gp : ffffffff81500aa0 tp : ff60000002b83000 t0 : ff200000000038c0
[ 444.364982] t1 : ffffffff815021f0 t2 : 000000000000001f s0 : ff200000000038b0
[ 444.364998] s1 : ff60000002c54d98 a0 : ff60000002a73940 a1 : 0000000000000000
[ 444.365013] a2 : 0000000000000000 a3 : 0000000000000003 a4 : 0000000000000100
[ 444.365029] a5 : 0000000000010100 a6 : 0000000000f00000 a7 : 0000000000000000
[ 444.365044] s2 : 0000000000000000 s3 : ffffffffffffffff s4 : ff60000002c54d98
[ 444.365060] s5 : ffffffff81539610 s6 : ffffffff80c20c48 s7 : 0000000000000000
[ 444.365075] s8 : 0000000000000000 s9 : 0000000000000001 s10: 0000000000000001
[ 444.365090] s11: ffffffff80099394 t3 : 0000000000000003 t4 : 00000000eac0c6e6
[ 444.365104] t5 : 0000000400000000 t6 : ff60000002e010d0
[ 444.365120] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[ 444.365226] [<ffffffff8009f9e0>] smp_call_function_many_cond+0x42c/0x436
[ 444.365295] [<ffffffff8009fa5a>] on_each_cpu_cond_mask+0x20/0x32
[ 444.365311] [<ffffffff806e90dc>] pmu_sbi_ctr_start+0x7a/0xaa
[ 444.365327] [<ffffffff806e880c>] riscv_pmu_start+0x48/0x66
[ 444.365339] [<ffffffff8012111a>] perf_adjust_freq_unthr_context+0x196/0x1ac
[ 444.365356] [<ffffffff801237aa>] perf_event_task_tick+0x78/0x8c
[ 444.365368] [<ffffffff8003faf4>] scheduler_tick+0xe6/0x25e
[ 444.365383] [<ffffffff8008a042>] update_process_times+0x80/0x96
[ 444.365398] [<ffffffff800991ec>] tick_sched_handle+0x26/0x52
[ 444.365410] [<ffffffff800993e4>] tick_sched_timer+0x50/0x98
[ 444.365422] [<ffffffff8008a6aa>] __hrtimer_run_queues+0x126/0x18a
[ 444.365433] [<ffffffff8008b350>] hrtimer_interrupt+0xce/0x1da
[ 444.365444] [<ffffffff806cdc60>] riscv_timer_interrupt+0x30/0x3a
[ 444.365457] [<ffffffff8006afa6>] handle_percpu_devid_irq+0x80/0x114
[ 444.365470] [<ffffffff80065b82>] generic_handle_domain_irq+0x1c/0x2a
[ 444.365483] [<ffffffff8045faec>] riscv_intc_irq+0x2e/0x46
[ 444.365497] [<ffffffff808a9c62>] handle_riscv_irq+0x4a/0x74
[ 444.365521] [<ffffffff808aa760>] do_irq+0x7c/0x7e
[ 444.365796] ---[ end trace 0000000000000000 ]---
That's because the fix in commit 3fec323339a4 ("drivers: perf: Fix panic
in riscv SBI mmap support") was wrong since there is no need to broadcast
to other cpus when starting a counter, that's only needed in mmap when
the counters could have already been started on other cpus, so simply
remove this broadcast. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/powernv: Add a null pointer check to scom_debug_init_one()
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Add a null pointer check, and release 'ent' to avoid memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/powernv: Add a null pointer check in opal_event_init()
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/imc-pmu: Add a null pointer check in update_events_in_group()
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. |
| EDIMAX BR-6428nS V3 1.15 is vulnerable to Command Injection. An authenticated attacker with access to the network can submit crafted input to the WLAN configuration functionality. Due to insufficient input validation, the attacker is able to execute arbitrary system commands on the device. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix skb leak and crash on ooo frags
act_ct adds skb->users before defragmentation. If frags arrive in order,
the last frag's reference is reset in:
inet_frag_reasm_prepare
skb_morph
which is not straightforward.
However when frags arrive out of order, nobody unref the last frag, and
all frags are leaked. The situation is even worse, as initiating packet
capture can lead to a crash[0] when skb has been cloned and shared at the
same time.
Fix the issue by removing skb_get() before defragmentation. act_ct
returns TC_ACT_CONSUMED when defrag failed or in progress.
[0]:
[ 843.804823] ------------[ cut here ]------------
[ 843.809659] kernel BUG at net/core/skbuff.c:2091!
[ 843.814516] invalid opcode: 0000 [#1] PREEMPT SMP
[ 843.819296] CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G S 6.7.0-rc3 #2
[ 843.824107] Hardware name: XFUSION 1288H V6/BC13MBSBD, BIOS 1.29 11/25/2022
[ 843.828953] RIP: 0010:pskb_expand_head+0x2ac/0x300
[ 843.833805] Code: 8b 70 28 48 85 f6 74 82 48 83 c6 08 bf 01 00 00 00 e8 38 bd ff ff 8b 83 c0 00 00 00 48 03 83 c8 00 00 00 e9 62 ff ff ff 0f 0b <0f> 0b e8 8d d0 ff ff e9 b3 fd ff ff 81 7c 24 14 40 01 00 00 4c 89
[ 843.843698] RSP: 0018:ffffc9000cce07c0 EFLAGS: 00010202
[ 843.848524] RAX: 0000000000000002 RBX: ffff88811a211d00 RCX: 0000000000000820
[ 843.853299] RDX: 0000000000000640 RSI: 0000000000000000 RDI: ffff88811a211d00
[ 843.857974] RBP: ffff888127d39518 R08: 00000000bee97314 R09: 0000000000000000
[ 843.862584] R10: 0000000000000000 R11: ffff8881109f0000 R12: 0000000000000880
[ 843.867147] R13: ffff888127d39580 R14: 0000000000000640 R15: ffff888170f7b900
[ 843.871680] FS: 0000000000000000(0000) GS:ffff889ffffc0000(0000) knlGS:0000000000000000
[ 843.876242] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 843.880778] CR2: 00007fa42affcfb8 CR3: 000000011433a002 CR4: 0000000000770ef0
[ 843.885336] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 843.889809] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 843.894229] PKRU: 55555554
[ 843.898539] Call Trace:
[ 843.902772] <IRQ>
[ 843.906922] ? __die_body+0x1e/0x60
[ 843.911032] ? die+0x3c/0x60
[ 843.915037] ? do_trap+0xe2/0x110
[ 843.918911] ? pskb_expand_head+0x2ac/0x300
[ 843.922687] ? do_error_trap+0x65/0x80
[ 843.926342] ? pskb_expand_head+0x2ac/0x300
[ 843.929905] ? exc_invalid_op+0x50/0x60
[ 843.933398] ? pskb_expand_head+0x2ac/0x300
[ 843.936835] ? asm_exc_invalid_op+0x1a/0x20
[ 843.940226] ? pskb_expand_head+0x2ac/0x300
[ 843.943580] inet_frag_reasm_prepare+0xd1/0x240
[ 843.946904] ip_defrag+0x5d4/0x870
[ 843.950132] nf_ct_handle_fragments+0xec/0x130 [nf_conntrack]
[ 843.953334] tcf_ct_act+0x252/0xd90 [act_ct]
[ 843.956473] ? tcf_mirred_act+0x516/0x5a0 [act_mirred]
[ 843.959657] tcf_action_exec+0xa1/0x160
[ 843.962823] fl_classify+0x1db/0x1f0 [cls_flower]
[ 843.966010] ? skb_clone+0x53/0xc0
[ 843.969173] tcf_classify+0x24d/0x420
[ 843.972333] tc_run+0x8f/0xf0
[ 843.975465] __netif_receive_skb_core+0x67a/0x1080
[ 843.978634] ? dev_gro_receive+0x249/0x730
[ 843.981759] __netif_receive_skb_list_core+0x12d/0x260
[ 843.984869] netif_receive_skb_list_internal+0x1cb/0x2f0
[ 843.987957] ? mlx5e_handle_rx_cqe_mpwrq_rep+0xfa/0x1a0 [mlx5_core]
[ 843.991170] napi_complete_done+0x72/0x1a0
[ 843.994305] mlx5e_napi_poll+0x28c/0x6d0 [mlx5_core]
[ 843.997501] __napi_poll+0x25/0x1b0
[ 844.000627] net_rx_action+0x256/0x330
[ 844.003705] __do_softirq+0xb3/0x29b
[ 844.006718] irq_exit_rcu+0x9e/0xc0
[ 844.009672] common_interrupt+0x86/0xa0
[ 844.012537] </IRQ>
[ 844.015285] <TASK>
[ 844.017937] asm_common_interrupt+0x26/0x40
[ 844.020591] RIP: 0010:acpi_safe_halt+0x1b/0x20
[ 844.023247] Code: ff 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 65 48 8b 04 25 00 18 03 00 48 8b 00 a8 08 75 0c 66 90 0f 00 2d 81 d0 44 00 fb
---truncated--- |
| A security vulnerability has been detected in jishenghua jshERP up to 3.6. This affects the function getUserByWeixinCode of the file jshERP-boot/src/main/java/com/jsh/erp/service/UserService.java of the component updatePlatformConfigByKey Endpoint. Such manipulation of the argument weixinUrl leads to server-side request forgery. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
