| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: delimit inode_share cache key components
Previously, inode_share keys were encoded as follows:
fingerprint || domain_id
It would be better to have a separator between the fingerprint and domain
ID so that the fingerprint won't be parsed as part of a domain ID.
Change the key encoding as follows:
domain_id || '\0' || fingerprint
Since domain_id is a NUL-terminated string, this makes the in-memory key
indices unambiguous. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: ets: clamp quantum in parse and fallback paths
ets_qdisc_change() falls back to psched_mtu() with no floor for bands
without an explicit quantum. With a crafted size table qdisc_pkt_len
reaches ~2 GiB, so a zero psched_mtu on a headerless device makes the
deficit-refill loop spin under the qdisc lock.
Move the floor into ets_quantum_parse() so explicitly configured quanta
are also clamped to [256, 1<<20], not just the fallback path.
Conditions to recreate the bug:
CONFIG_NET_SCH_ETS=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root ets bands 3 strict 2 quanta 1 1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate assoc response length before status and IE access
cfg80211_rx_assoc_resp() initialises the status and response-IE fields
of cfg80211_connect_resp_params from the management frame before
proving that the frame is long enough for those offsets. S1G and
regular association responses also have different IE offsets, but the
S1G path only patched resp_ie after the unsafe initialiser had already
run.
Defer resp_ie, resp_ie_len, and status to after the link-iteration
loop. Use a bool to remember whether the frame is S1G, then validate
the appropriate minimum length and set all three fields in a single
if/else block. Funnel short-frame and SME-reject cleanup through a
shared free_bss label for the abandon paths. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix double fput
Fix a double fput() in error handling in cachefiles_create_tmpfile(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref when showing a void BTF type
btf_modifier_show() resolves the modifier and then calls
btf_type_ops(t)->show() unconditionally. For the void type (type_id 0,
BTF_KIND_UNKN) kind_ops[] has no entry, so ->show is NULL.
A "const void" (a modifier resolving to void) cannot be a map key or
value - map_check_btf() rejects it because void has no size - so the map
dump path does not reach it. But bpf_snprintf_btf() takes a type_id
straight from the BPF program, and passing such a "const void" from the
vmlinux BTF NULL-derefs:
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
RIP: 0010:btf_modifier_show (kernel/bpf/btf.c:2914)
Call Trace:
<TASK>
btf_type_show (kernel/bpf/btf.c:8251)
btf_type_snprintf_show (kernel/bpf/btf.c:8321)
bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047)
bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829)
__sys_bpf (kernel/bpf/syscall.c:4804)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Fall back to btf_df_show() when the resolved type has no show op; it
emits the "<unsupported kind:N>" placeholder already used for kinds like
FWD and FUNC. bpf_snprintf_btf() then returns the length as usual. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject BPF_PSEUDO_FUNC reference to the main program
fixups.c:jit_subprogs() rewrites BPF_PSEUDO_FUNC loads to contain real
function addresses. This function is invoked from bpf_jit_subprogs()
only when env->subprog_cnt > 1. Meaning that for any program like
below:
int main(void *ctx) {
void *ptr = main;
...
bpf_timer_set_callback(..., ptr);
...
}
The 'ptr' won't be ever converted to contain an address.
In combination with e.g. bpf_timer_set_callback() this would lead to a
function call at a bogus address.
Instead of complicating the implementation, just assume that no useful
program needs main to be a sync or async callback and reject
BPF_PSEUDO_FUNC loads for the main subprogram. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/proc: Use file_ns_capable() when checking config space read access
proc_bus_pci_read() decides how much of the config space is readable based
on capable(CAP_SYS_ADMIN), which checks the credentials of the task calling
read(), not the credentials of the process that opened the file.
The sysfs equivalent, pci_read_config(), has checked the credentials of the
opening process since commit de139a339395 ("pci: check caps from sysfs file
open to read device dependent config space"), so a privileged process can
open the config space file and pass the file descriptor to an unprivileged
process (for example, a process running a KVM guest with an assigned
device), which can then read the entire config space. The check was
subsequently routed through the LSM framework in commit 47970b1b2aa6 ("pci:
use security_capable() when checking capablities during config space read")
and converted to the dedicated helper in commit ab0fa82b2df9 ("pci-sysfs:
use proper file capability helper function").
Thus, the two interfaces check the same capability against different
credentials. Checking the credentials of the task calling read() makes the
outcome depend on who reads rather than who opened, so the restriction is
bypassed whenever a more privileged process reads through the descriptor.
Checking the credentials recorded in file->f_cred settles the decision at
open() time and ties it to the file, where it cannot change with the
caller.
Use file_ns_capable() to check CAP_SYS_ADMIN against the credentials in
effect when the file was opened, bringing the procfs interface in line with
the sysfs behaviour.
As a result, a file descriptor opened by a privileged process and passed to
an unprivileged one now allows the entire config space to be read through
procfs, matching sysfs. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: validate handler object type in two places
ACPICA: validate handler object type in acpi_ev_has_default_handler()
and acpi_ev_find_region_handler(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: rkvdec: bound HEVC tile loops and PPS id to the array capacity
compute_tiles_uniform() and compute_tiles_non_uniform() loop over
num_tile_columns_minus1 + 1 / num_tile_rows_minus1 + 1 entries, and
assemble_hw_pps() writes one COLUMN_WIDTH / ROW_HEIGHT register per tile
and indexes priv_tbl->param_set[] by pic_parameter_set_id, all taken from
the untrusted PPS. Use the bounded v4l2_hevc_pps_num_tile_columns() /
v4l2_hevc_pps_num_tile_rows() helpers for the tile loops, and bail out of
assemble_hw_pps() before indexing priv_tbl->param_set[] with an
out-of-range pic_parameter_set_id, so the writes stay within the hardware
tables. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_input: reset device if input_register_device() fails
Probe marks the device DRIVER_OK with virtio_device_ready() before
calling input_register_device(). If registration fails, the error path
cleared vi->ready and called del_vqs() while the device was still live,
so the device could keep DMA to queues that were already torn down.
Match remove/freeze: call virtio_reset_device() on that path before
tearing down the virtqueues. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: i3c: serialize probe with bus removal
mctp_i3c_probe() drops busdevs_lock after finding the matching bus. A
concurrent I3C_NOTIFY_BUS_REMOVE can then unregister and free the bus
netdev before probe passes its private data to mctp_i3c_add_device().
The latter consequently adds a list node through a freed mbus pointer.
Keep busdevs_lock held until the device has been added. This also
satisfies the __must_hold annotation on mctp_i3c_add_device(). |
| OpenClaw versions before 2026.7.1 fail to properly authorize non-owner users executing MCP configuration changes through /mcp set and /mcp unset commands. Attackers can persist arbitrary stdio MCP commands that execute with OpenClaw process privileges when configuration loads, compromising host confidentiality, integrity, and availability. |
| OpenClaw is an agent gateway distributed via npm. In versions >= 2026.4.10 and < 2026.7.1, persistent memory dreaming mutations omit owner permission checks. An authorized but non-owner external-channel sender can issue the persistent '/dreaming on' and '/dreaming off' commands to enable or disable the Gateway's Memory Core dreaming behavior, disabling background memory processing or re-enabling durable memory promotion where the owner expected it to remain disabled; the practical confidentiality, integrity, and availability impact depends on stored conversation material and subsequent memory use. Read-only status and help commands remain governed by normal command policy. The issue is fixed in version 2026.7.1. As a workaround, disable dreaming commands in external channels or restrict channel command access to owners. |
| OpenClaw (npm package 'openclaw') before 2026.7.1 does not enforce the administrator scope requirement on browser control when it is reached through the node.invoke method, although direct browser.request access requires administrator scope. In Gateway deployments that honor caller identity and narrower operator scopes, a write-scoped caller with access to a connected browser-capable node can inspect pages, navigate tabs, or interact with browser-visible applications without the configured admin requirement; practical impact depends on the browser profile and signed-in state. Shared-secret token and password callers are considered fully trusted operators under OpenClaw's security model and are not affected. The issue is fixed in 2026.7.1. |
| OpenClaw is an npm-distributed agent runtime. In versions >= 2026.2.26 and < 2026.7.1, PowerShell command analysis on Windows hosts running in exec allowlist mode could approve an exact executable resolved from PATH but subsequently execute a same-named executable located in the workspace directory. If lower-trust content can place an executable with an approved basename into an agent-writable workspace and steer an approved PowerShell command that uses a bare executable name, OpenClaw may run the workspace file instead of the allowlisted path, executing arbitrary code with the privileges of the Gateway or node-host user. The issue does not require replacement of the approved executable itself. Version 2026.7.1 contains a fix; as a workaround, avoid bare executable names in approved PowerShell commands and keep executable files out of agent-writable workspaces. |
| OpenClaw (npm package 'openclaw') before 2026.7.1 improperly handles case sensitivity in the model-facing cron tool: a mixed-case payload kind can pass the agent-facing shell-execution guard and later normalize into a command job. An actor able to steer a tool-enabled agent can therefore create a persistent cron job that executes attacker-selected commands with the privileges of the OpenClaw process user, resulting in access to host files and credentials and impact to scheduled service availability. The issue is limited to cron jobs created or edited through the model-facing cron tool; direct CLI and authorized Gateway scheduling surfaces are trusted operator controls. Fixed in 2026.7.1. |
| OpenClaw versions before 2026.8.1 contain a server-side request forgery vulnerability in browser wait predicates that allows attackers to bypass SSRF protections by reaching blocked destinations. Attackers can use the wait --fn function against an existing browser session to request loopback or private destinations without navigation checks applied to other browser actions. |
| OpenClaw versions >= 2026.3.25 and < 2026.8.1 apply invalid-token rate limiting for Synology Chat webhooks before authentication and key the limit on the raw proxy socket address. In deployments where OpenClaw sits behind a trusted reverse proxy or tunnel and multiple external clients share a single socket address, an unauthenticated sender can exhaust the shared invalid-token budget, causing subsequent legitimate Synology Chat webhook callbacks to be rejected until the rate-limit window expires. The attacker cannot obtain a valid token or read message data; the impact is temporary loss of channel availability. Fixed in 2026.8.1. |
| OpenClaw versions before 2026.8.1 fail to properly restrict access to operator command cron jobs, allowing model-visible agent callers to read and execute ownerless command jobs. Attackers can inspect stored environment variables and force-run disabled or unscheduled command jobs to access secrets and execute operator-authored commands. |
